PSC Ram in Redneck Ram out 🦏 Hydraulic Hose Guard 🚗 Uber to Get Jeep Parts VLOG
Автокөліктер мен көлік құралдары
Hi, I finally finished the PSC ram relocation mod. Recorded a side by side comparison of the Redneck ram & PSC ram. Had new Shark Skin hydraulic hoses made (previous hoses were chafed), wrapped new hoses in spiral guard, visited Round 2 Offroad they welded on new hydraulic ram tabs to my Dynatrac ProRock 60, took uber to get jeep parts 😅
IG - @jeeparmyusa
Swag - @reflectivegraphics2.0
Greatest Jeep Phone Mounts in The World:
www.67d.com/jeeparmyusa
Support the Artist:
Song: Dj Quads - Downtown Funk (Vlog No Copyright Music)
Music promoted by Vlog No Copyright Music.
Video Link: • Video
/ lakeyinspired
/ jeff-kaale
Пікірлер: 68
Yo! Thanks for checking out the vids! I have a lot of fun making these silly things haha
"But because I like doing sh-t the hard way" - 😆 - The story of my life. Thanks for the vid.
I dont care if your lifted, what wheels, lights or accessory you have it doesn't impress me anymore but when I see factory half doors on a JK I'm like "oooooh factory half doors👾" lmao
@adidas4275
2 жыл бұрын
me too... ha!
Awesome!!!
Looks tight AF! HOOAH!
And that’s how it’s done boys👍🏼👍🏼
@JeepArmyUSA
5 жыл бұрын
Haha thanks KDG!
The outer rubber is just a jacket. Lots of heavy-duty equipment out there with sun beat hose with the rubber jacket missing, the steel inside is what holds the pressure. Nothing wrong with replacing the hoses, but they could have gone a long time still. The steel inside would wear on whatever it was rubbing on, a split hose tiewrapped on is a good fix for this issue.
Love the attention to detail. Nice job.
@JeepArmyUSA
4 жыл бұрын
Thanks Mike!
Need more vids keep them coming 👍🏻🤙🏻🤙🏻🤙🏻
@JeepArmyUSA
5 жыл бұрын
Thanks Nate! I appreciate it dude 🙌🏽
Sick ass video bro!
@JeepArmyUSA
5 жыл бұрын
😅 thanks homie!
Damn that stretch bro!
@JeepArmyUSA
5 жыл бұрын
Thanks brutha! She still had some to give too
@7:25 Lol😂 No joke tools are expensive
I heard goo gone can also remove my debt from jeep parts 👀😂. Keep up the great work fam!
@JeepArmyUSA
5 жыл бұрын
Hahaha, your* gonna need a couple bottles for that 😆
Dude ! You crack me up when u put your hand to feel the hot air n say “fuck” lol Btw you did a bad ass job on wrapping them hoses ... how much will you charge to do mine lol ?
Gr8white_jk on ig up in here what up! Haha cant believe how much the jeep has come along since the begging of this channel good job bro that savvy cleaned it up nice!
@JeepArmyUSA
5 жыл бұрын
Lol What up bro! Ya man she’s coming along. That warn fits in there perfectly.
I didn’t see a pump reservoir or a cooler....not needed?
Your Jeep looks great! I'm thinking about getting the Dana 60s. Are those 40s? If so, what backspacing do you have on your wheels? Your vids are great!
@JeepArmyUSA
5 жыл бұрын
Ty! Ya 40” nitto trail grapplers, trail ready bead locks w/ 3.50” BS 17x8.5” thanks for the props!
@Sathralis
5 жыл бұрын
@@JeepArmyUSA Cool, thanks man! Any rubbing issues with that BS?
@JeepArmyUSA
5 жыл бұрын
Not a single one 👌🏽
Just ordered up a PSC big bore with ram setup and definitely want to do the spiral wrap like you did. What size is the spiral wrap that you went with? Thanks
@JeepArmyUSA
5 жыл бұрын
The hydraulic hose was 3/8 and the rhino spiral wrap OD range opening is .39 - .66
@jdralston4116
5 жыл бұрын
Awesome thank you keep up the awesome videos
Good stuff! How difficult was it to remove two old hoses & then re-install the two new hoses from the box to the ram with the box already in place. Tight fit?
@JeepArmyUSA
3 жыл бұрын
Not too bad. I just took my time and picked the right angles to get to the hose ends on the gearbox. It’s a little tight but totally doable.
genright cage, b pillar chop & mopar 1/2 door!!!!
@JeepArmyUSA
2 жыл бұрын
🤤
thats a nice built rig......with no winch!
@JeepArmyUSA
5 жыл бұрын
Did you not peep 👀 that warn zeon winch??
What length did you go with?
@JeepArmyUSA
4 жыл бұрын
8” travel 1.75” bore
How long did the hoses end up being?
@JeepArmyUSA
3 жыл бұрын
Just went out to the garage and on my setup I measured roughly 45 to 48 inches
What? No comparison? Was there any difference in the steering and drive ability?
@JeepArmyUSA
3 жыл бұрын
Not really, just the PSC ram seemed beefier to me so it made sense that it will hold up better. The relocated ram is no longer exposed to rocks and the hydraulic hoses are protected. Just trying to make components hold up longer.
what steering box did you use? or did you tap your own box and if so do you have video?
@JeepArmyUSA
Жыл бұрын
Red neck ram tapped box. So far so good.
@GULIVERSOFFROAD
Жыл бұрын
@@JeepArmyUSA sweet thank you im gonna tap my own box till i get a hd one from psc but im not running their ram
@JeepArmyUSA
Жыл бұрын
How big you going? 37’s? If I had to redo it, I’d go with a tapped hd with psc ram for running 40’s
@GULIVERSOFFROAD
Жыл бұрын
@@JeepArmyUSA im currently on 38 inch toyo open country's
@GULIVERSOFFROAD
Жыл бұрын
@@JeepArmyUSA put them on on june 9th
What size ram?
@JeepArmyUSA
5 жыл бұрын
1.75” Bore 8” Travel
Sounds like you live in the jungle with all those birds lol
@JeepArmyUSA
5 жыл бұрын
I live in the damn city! These birds just hate me because of my freedoms.
What do you daily drive
@JeepArmyUSA
5 жыл бұрын
Decade old Ford Edge. That’s why it’s in the shop lol
@robertschmitz6805
5 жыл бұрын
'15 JK
@jackknutel1083
5 жыл бұрын
JEEPARMY USA it’s a ford that’s why lol
The ram itself, whether PSC or RNR, isn't going to make much difference, if any at all. It's the steering gear box...I swapped WTO gear box out for PSC Big Bore and it was night and day. The difference in sector shafts alone was worth the swap. Big Bore was just ridiculously more stout, over 50lbs. Needed an engine hoist to install the damned thing. You might not notice the difference between the 2 on the road but once you lock up front diff and pinned up on the rocks, that's when you'll be like...damn, should've went this route from the get go. By no means am I shitting on WTO, great bang for the buck and if you don't plan on going any bigger than 37s then It'd be all you'd need...and maybe a sector shaft brace but once you go 40s, Big Bore upgrade should be mandatory.
@JeepArmyUSA
5 жыл бұрын
Eventually i may go psc cooler, pump, res, and big bore. I like to piece meal as I go to experience the differences. And for sure, the wto kit is a nice bang for your buck to get into hydro assist.
Hose shop located in austin? Can you post the contact info or address
@JeepArmyUSA
4 жыл бұрын
Hydraulic House Inc 6300A Burleson Road Austin, TX 78744 United States
@pjshooter6
4 жыл бұрын
@@JeepArmyUSA thank you. Im just down the road, in satx
Damn those birds bro. Freaking Russian birds man
@JeepArmyUSA
5 жыл бұрын
Lmao 🤣 it’s time for hobby shop in the back.
Military grade😆
You could be german ..
@JeepArmyUSA
4 жыл бұрын
Lol. Thank you