Best Jeep videos on KZread!

Awesome job Martin looks great man

is the best mechanic I've seen in a long time

@martinbuilt

4 жыл бұрын

Thank you, Michael

Call good video. Better than most play glad you mentioned what size drill bit taps

@martinbuilt

Ай бұрын

Thank you I'm glad you liked it and found it helpful.

Thanks, good video

@martinbuilt

3 жыл бұрын

Glad you liked it!

GOOD VIDEO

@martinbuilt

4 жыл бұрын

Thank you!

everything you mention i already no about but anyway thanks for your out put..have a great day..

@martinbuilt

4 жыл бұрын

There's another thing how about the frame where you bolt the steering box to. Many times on the Chevrolet the frame will crack around the steering box this would cause a lot of movement in steering wheel.

@thedobermangang3503

4 жыл бұрын

i no allabout the frame cracking where it mouts i have already check that when i pull my gear box off the frist time

Good work f

@martinbuilt

Жыл бұрын

I'm glad you liked it.

As always, job well done Martin. The beard's cool too dude.

@jaidenvicente7200

2 жыл бұрын

i know im asking randomly but does any of you know of a tool to get back into an Instagram account..? I was stupid lost my login password. I would love any help you can give me!

@malachiazariah7237

2 жыл бұрын

@Jaiden Vicente instablaster ;)

@jaidenvicente7200

2 жыл бұрын

@Malachi Azariah i really appreciate your reply. I found the site on google and im in the hacking process atm. I see it takes a while so I will reply here later with my results.

@jaidenvicente7200

2 жыл бұрын

@Malachi Azariah It did the trick and I finally got access to my account again. I am so happy! Thanks so much, you saved my account !

@malachiazariah7237

2 жыл бұрын

@Jaiden Vicente You are welcome =)

When will you get the follow up videos to this?

That was impressive moving that rock and sliding the Jeep over. I'm on 35s with a front locker. In 4 low while Turning sharp is a chore sometimes. Usually pop back into 2wd

@martinbuilt

5 жыл бұрын

That sounds like the shifting fork inside the transfer case needs to be replaced. By the way I'm on 35's and front and rear lockers

@lol123321123321

5 жыл бұрын

@@martinbuilt oops, I meant to say I shift back into 2wd to make sharp maneuvers and shift back into 4x4 after. Simply having the front end unlocked makes a big difference. I don't have a selectable locker. Spartan lunch box locker.

@martinbuilt

5 жыл бұрын

@@lol123321123321 oh I thought you were saying that it was popping out of 4 wheel drive.

@lol123321123321

5 жыл бұрын

@@martinbuilt yeah, I phrased that wrong. Nice jeep man, looks like there's not any mods left for that Jeep! Built right

@martinbuilt

5 жыл бұрын

@@lol123321123321 Thank you, I got a few mods to go

Great vid. What do you use for cutting fluid?

@martinbuilt

5 жыл бұрын

I didn't use any Pacific cutting oil it is just some oil that I had laying around. Something's better than nothing. Thank you for watching.

So what is under that passage plug? Could a person remove that plug, open up the hole and tap it vs cross drilling the thinner wall? I have seen the replacement end caps that have a port in them, which port is that cap supplying vs your method of drill and tap? BTW not the biggest fan of the ported caps, just seems vulnerable!

Great video martin! Could you do an overview of how you plumbed in the ram? did you add a cooler to the power steering?

@martinbuilt

5 жыл бұрын

Yeah I got a couple more videos I'm working on for the steering gear box of the XJ. I did add a power steering cooler and a 1 quart oil filter.

@TheOffRoadCorner

5 жыл бұрын

nice! looking forward to the new content. I'm building an XJ right now on my channel and your videos have great info on some upgrades I plan on doing to it.

@clsalcedo99

5 жыл бұрын

Can’t wait to see those videos, you got the best DIY XJ videos.

@clsalcedo99

5 жыл бұрын

@martinbilt

@clsalcedo99

5 жыл бұрын

Do a walk around of your XJ

I WILL REALLY APPRECIATE YOUR FEED BACK..

What would the on road characteristics be like with a hydro assist upgrade. My cherokee is my daily driver. Cherokee steering has always felt heavy when I drive my other rigs. Curious how this would make it feel during normal driving. Hoping it would help it feel more refined and modern. If that makes sense. Appreciate the videos man.

@martinbuilt

Жыл бұрын

At 1st you're going to swear that the steering is loose and what it is it's become a more sensitive, it takes less effort so you have a tendency to oversteer at 1st until you get used to it because the steering wheel feels extremely light.

@VT5874

Жыл бұрын

@@martinbuilt Thank you for the response! -Being for sensitive is what im looking for. As far as road characteristics/handling, is there any worth mentioning? Do you think it would accomplish what im looking for, or do you think it makes the steering feel “wonky”? -I am really hoping it just makes it feel a little softer/easier to steer, more like my tacoma. -Do you happen to have any suggestions or ideas that would accomplish this, if a hydro assist is a step in the wrong direction? Again, very much appreciated.

Nice video again Martin! But... That drill press you have sounds terrible :-)

Ok...I know it has been 9 years since you published this video...but did you ever have a video on installing the hydraulic cylinder and lines?

@martinbuilt

2 жыл бұрын

No, I didn't do a video on that, I wish I had.

@stevenm7566

2 жыл бұрын

@@martinbuilt what did you use for the hoses and hydraulic cylinder? And how much travel does it need? And do you still have the XJ?

I HAVE A QUESTION FOR YOU I HAVE A 1990 K5 BLAZER WITH A 3 INCH BODY LIFT ON IT AND 35X12 TIRES ON IT AND I HAVE ALOT OF PLAY IN MY STEERING EVER THING IS NEW UNDER THERE I HAVE PUT 2 REBUILD GEAR BOXES ON IT AND IT STILL HAS PLAY I HAVE HAD THE TRUCK FOR A LONG TIME DROVE IT OUT OF TOWN AND I NEVER HAD PLAY LIKE THIS ..BUT WHEN IM CHECKING IT ..IT LOOKS LIKE ITS COMING FROM THE GEAR BOX I CAN MOVE MY STEERING SHAFT 2 OR 3 INCH BACK AND FORWARD AND I DO NOT SEE MY WHEELS MOVE IS IT POSABLE TO HAVE GOTTEN 2 BAD GEAR BOXES..TELL ME WHAT YOU THINK...THANKS

@martinbuilt

4 жыл бұрын

I would imagine it is possible that the steering boxes were bad but unlikely. I would have someone rock the steering wheel back and forth while you're observing the steering shaft to the steering gear box to make sure there's no movement there making sure that that connection is solid) then also check your pitman arm and then your tie rod ends. Watch the movement at the steering gear box between the input and output shafts.

@thedobermangang3503

4 жыл бұрын

@@martinbuilt hey truse me the pitmanarm are tie rods ball joints everything is brand new i have a brand new up grade telesconing steering shaft from summit ..new rage joint ..only thing i can see is the gear box..

That's one bad mudder. You didn't get to go through all the other required parts though 😕

Will this work on the jeep grand cherokee wj from 99 to 04

@martinbuilt

4 жыл бұрын

Not that I know of.

@gonsefo2

Жыл бұрын

kzread.info/dash/bejne/d46j0auMnKadeso.html&ab_channel=charger19681988

Hi Martin- is the PSC hydraulic pump bolt at the end?

@martinbuilt

4 жыл бұрын

can you contact me on Facebook facebook.com/Martinbuilt-2351766611763181

is it possible to improve Jeep WJ Power steering ??

@farerse

5 жыл бұрын

I want to steer a Jeep WJ with just one finger ..

@MrMrsregor

4 жыл бұрын

@@farerse yea, watch this video and apply this info to a wj

@gonsefo2

Жыл бұрын

@@farerse kzread.info/dash/bejne/d46j0auMnKadeso.html&ab_channel=charger19681988

@gonsefo2

Жыл бұрын

kzread.info/dash/bejne/d46j0auMnKadeso.html&ab_channel=charger19681988

35X12 15 INCH WHEELS ON IT..