This demonstration truly helped me save money from buying a new detailer. Thanks!
@shonf214 жыл бұрын
Excellent video... thank you!! Only part that was tricky for me was my white plastic piece shot across my shop while taking apart and was tricky getting back in, my problem was, u cant screw back together before inserting the white plastic piece or It will not go.... it has a lip on it that goes underneath the lip on the housing, then the 2 prongs will fit snug in back side of plastic groves once the plastic is under lip and front side sitting on bottom housing.... just in case you had the problem I did
@adisonhiatt154
4 жыл бұрын
Tyson Jacobs thank you bro! That’s exactly what happened to me
@minameaar1
2 жыл бұрын
Really helpful comment. Exactly what happened to me yesterday. Cheers
@brandonbaez7555
Жыл бұрын
This is why I'm here! Thank you
@linsleec
10 ай бұрын
Me too
@CashinOut5134 жыл бұрын
Can u make one where we can actually see what your doing. It’s really confusing putting things down picking them up covering them with your hands. No hate at all bro but the video wasn’t too helpful for me
@LBCAndrew
3 жыл бұрын
I didnt have any issues seeing what he was doing.
@mzdebbiecakes23
2 жыл бұрын
I can see exactly what he’s doing
@flojotube
Жыл бұрын
Lol
@stavroshouiris2 жыл бұрын
I have the cordless and this video helped allot with reassembling it as it's not that different
@HarryHLandscapes Жыл бұрын
Excellent video. Would’ve had no chance with that little white piece without watching this video
@nathanbryan7521 Жыл бұрын
Thanks for the video! It took care of the rattle that I was experiencing.
@narutonish4 жыл бұрын
Thank you. It helped me figure out. How to put it back together
@renesanhio18125 ай бұрын
Merci beaucoup 😊. Ça m’a vraiment servie 🙏🏿🙏🏿🙌
@tealahernandez3966 Жыл бұрын
Who are you.??? Is the question of the day. You saved me in so many ways thanks.
@funeralblvck4755 Жыл бұрын
I can get the spring and white part in for s**t. What am I doing wrong? 😭
@LBCAndrew3 жыл бұрын
Funny you mention that part breaking at the very end. Its what broke on mine which was why i had mine apart. *sigh*
@ericalbert69542 жыл бұрын
Merci beaucoup l'Ami !
@cedricd12932 жыл бұрын
Very usefull! Thank you 😁
@ryanminton5265 Жыл бұрын
Life saver, thank you sir
@bryonybrown66484 жыл бұрын
Hi I’ve just seen this video and I’m struggling to get mine back together. The white bit in yours is black in mine and it doesn’t have any screws.
@joncell75823 жыл бұрын
Mine did a pop noise and it smell like electric burnt do u know what it could of been ? It doesn’t turn on
@Fenderlin64 жыл бұрын
Thanks Alot!!
@AJones-kn9fd
4 жыл бұрын
No problem do you need me to post any other s
@linsleec10 ай бұрын
Hi thanks for your video Just having trouble with the white plastic part once at the end 🤔 Could you do a quick video explaining that part Thanks
@cindymancini61533 жыл бұрын
Will it work without the spring? I lost mine 😕
@mispasatiempos1.54 жыл бұрын
Good thanks help me a lot..
@AJones-kn9fd
4 жыл бұрын
No problem
@jhayeanderson10003 жыл бұрын
Make it closer to the subject next time. And have a good lighting.
@shirleyguzman28392 жыл бұрын
Thank you💕
@aumharmoniepaixjoie8988 Жыл бұрын
No cut now afterwork 🙄, how to repared ?
@tylus174 жыл бұрын
Didn’t work. Once that spring pops loose it’s over. Even when I placed it properly on the lip and closed the housing it was loose & wasn’t able to support the plastic cam follower.
@AJones-kn9fd
4 жыл бұрын
Please don’t skip steps at 3:09 sounds like spring is facing up and not down.
@tylus17
4 жыл бұрын
From the Homefront to the Homestead I put the spring facing down.
@Erik-ym6le4 жыл бұрын
Hello I have a “pro trimmer wahl cordless detailer” I’m having trouble reassembling it please help
@AJones-kn9fd
4 жыл бұрын
What part is given you trouble
@Erik-ym6le
4 жыл бұрын
From the Homefront to the Homestead I removed both screws and I can’t figure out how to put them back to how they were. (My detailer is different than this one)
@elvinchristenson5968
3 жыл бұрын
I have the same problem, I can’t find a video for the Cordless Detailers
@lisaromano5290 Жыл бұрын
Your fingers are in the way so thanks I just waisted 7 minutes off to find another video
@TimelordUK2 жыл бұрын
not clear enough. im only trying to re assemble the head
Пікірлер: 43
This demonstration truly helped me save money from buying a new detailer. Thanks!
Excellent video... thank you!! Only part that was tricky for me was my white plastic piece shot across my shop while taking apart and was tricky getting back in, my problem was, u cant screw back together before inserting the white plastic piece or It will not go.... it has a lip on it that goes underneath the lip on the housing, then the 2 prongs will fit snug in back side of plastic groves once the plastic is under lip and front side sitting on bottom housing.... just in case you had the problem I did
@adisonhiatt154
4 жыл бұрын
Tyson Jacobs thank you bro! That’s exactly what happened to me
@minameaar1
2 жыл бұрын
Really helpful comment. Exactly what happened to me yesterday. Cheers
@brandonbaez7555
Жыл бұрын
This is why I'm here! Thank you
@linsleec
10 ай бұрын
Me too
Can u make one where we can actually see what your doing. It’s really confusing putting things down picking them up covering them with your hands. No hate at all bro but the video wasn’t too helpful for me
@LBCAndrew
3 жыл бұрын
I didnt have any issues seeing what he was doing.
@mzdebbiecakes23
2 жыл бұрын
I can see exactly what he’s doing
@flojotube
Жыл бұрын
Lol
I have the cordless and this video helped allot with reassembling it as it's not that different
Excellent video. Would’ve had no chance with that little white piece without watching this video
Thanks for the video! It took care of the rattle that I was experiencing.
Thank you. It helped me figure out. How to put it back together
Merci beaucoup 😊. Ça m’a vraiment servie 🙏🏿🙏🏿🙌
Who are you.??? Is the question of the day. You saved me in so many ways thanks.
I can get the spring and white part in for s**t. What am I doing wrong? 😭
Funny you mention that part breaking at the very end. Its what broke on mine which was why i had mine apart. *sigh*
Merci beaucoup l'Ami !
Very usefull! Thank you 😁
Life saver, thank you sir
Hi I’ve just seen this video and I’m struggling to get mine back together. The white bit in yours is black in mine and it doesn’t have any screws.
Mine did a pop noise and it smell like electric burnt do u know what it could of been ? It doesn’t turn on
Thanks Alot!!
@AJones-kn9fd
4 жыл бұрын
No problem do you need me to post any other s
Hi thanks for your video Just having trouble with the white plastic part once at the end 🤔 Could you do a quick video explaining that part Thanks
Will it work without the spring? I lost mine 😕
Good thanks help me a lot..
@AJones-kn9fd
4 жыл бұрын
No problem
Make it closer to the subject next time. And have a good lighting.
Thank you💕
No cut now afterwork 🙄, how to repared ?
Didn’t work. Once that spring pops loose it’s over. Even when I placed it properly on the lip and closed the housing it was loose & wasn’t able to support the plastic cam follower.
@AJones-kn9fd
4 жыл бұрын
Please don’t skip steps at 3:09 sounds like spring is facing up and not down.
@tylus17
4 жыл бұрын
From the Homefront to the Homestead I put the spring facing down.
Hello I have a “pro trimmer wahl cordless detailer” I’m having trouble reassembling it please help
@AJones-kn9fd
4 жыл бұрын
What part is given you trouble
@Erik-ym6le
4 жыл бұрын
From the Homefront to the Homestead I removed both screws and I can’t figure out how to put them back to how they were. (My detailer is different than this one)
@elvinchristenson5968
3 жыл бұрын
I have the same problem, I can’t find a video for the Cordless Detailers
Your fingers are in the way so thanks I just waisted 7 minutes off to find another video
not clear enough. im only trying to re assemble the head
Wish he would turn off the corny music
Thank you sir, this was really helpful! 🦾