Just found this video, your website is added to my bookmarks for future reference. I always thought it was petty and frankly stupid that you could only buy a new or reconditioned pump, as they refused to sell just the piston seal, so well done. I am quite sure you'll be hearing from me in due course when my 14 year old compresser gives up the ghost.....oh yes and Ed from wheeler dealers would appreciate a call re this kit too I'd imagine.

Mistrzowskie wykonanie 😁 czas zabrać się do dzieła 😊 100/100

Thanks Andy. This is one video I will certainly save. I think I may be in need of the kit soon.......

@ToshLubek

8 жыл бұрын

+Andrew Kennedy Hi Andrew, I'm glad you liked the video. I'll pass you comment on to Andy.

Thank you Andy - Great kit and instructions! I just fixed my 2007 Jaguar XJ8!

@ToshLubek

2 жыл бұрын

On behalf of Andy, that's great news.

Great video.. you are one of a million. Very clever and icradebale hands

Cool. Thought one should first test the repair before final housing re-assembly maybe?

Hi Andy, mine has no problem and its quiet in a good nic for a 2006 and obeys with no faults, but its coming up to 120K Will you advice to change it or only change it when you start having any symptoms? Thanks PS Amazing instructions

Hi Andy, thanks for rapid supply of kit . I now have an issue where reservoir will not charge above 2.6 bar , Any ideas ? 2004 e53 4.8is

Thanks Andy, does it what it says on the tin:)

Excellent video. Even though it was in a foreign language. :D Thanks Andy. Star man!

Just done it as per the instructions and it was pretty straightforward. The old ring was pitted and looked as if it wasn’t really making contact with the bore. Anyway I’ll fit it back into the car and fingers crossed. Why do Land Rover make everything so complicated ????

great video. do you know how long it should take to go from access to normal and normal to high heights?

@ToshLubek

3 жыл бұрын

Hi Rover Coupe. You can get in touch with Andy through his website www.bagpipingandy.com

Hello, I have an bmw e53 2004 facelift, do you have also repair kit for pneumatic compressor? I have air suspension on all wheels. thank you

Great Video Andy, I love your Scottish accent!!!

@ToshLubek

6 жыл бұрын

Thank you.

What a lovley accent! Great video to!

@ToshLubek

8 жыл бұрын

+E30Sim Thanks. Glad you like both.

Hi, great video, just bought a l322, suspension very slow to pick it's self up, so will get your kit. Is it not wise to air dryer at same time

@ToshLubek

8 жыл бұрын

+tommymoto41 I Tommy. I have passed your question on to Andy, who developed the repair kit, and will post a reply as soon as possible.

@ToshLubek

8 жыл бұрын

+tommymoto41 Hi Tommy. Andy has been in touch and given this answer to your question. The piston ring kit will renew the air pressure, the air drier removes moisture but doesn't add to the compressor air pressure output, I can offer new drier beads if your beads are saturated but its not that common. Get in touch here if you need anything other than the piston ring repair kit: info@bagpipingandy.com

My Car Air Suspension sit down if I dont use Car for 4-5days would this kit solve my issue.

Hello, I am French and I use an automatic translator so sorry if there are any errors .. I replaced my 4 air cushions (e53 4.8is) but the front suspension remains very very hard! I cannot compressed them by hand, I have 12.5bars in the pressure accumulator. you know why? I have only one fault that sometimes happens: accumulator pressure remains constant, filling has been requested. Compressor ok, trim sensor ok Thank you

I can use the same kit for my Range Rover HSE 2006 ?

Thank you , could you help me with some thing / how I could replace Air Suspension`s rubber tube for Audi Q7 2008 , in fact I have problem with the big rings (take them off) & (return them back)

@ToshLubek

10 жыл бұрын

Hi Corolla Toyota. You should have got the reply from my other video on Andy but if not, I have passed on your comment to Andy and you can buy a kit from Andy's website, you will find the link to his website in this video's description. Thanks, Tosh

@radiator2lines

10 жыл бұрын

Tosh Lubek Hi Mr. Tosh , thank you for caring , in fact I visited the website ,& there is no problem with buying a Kit from Andy , my Question was about another thing , if you have Andy E mail or if you could send to me your E mail , I will send to you some pictures to show you what I want . Thanks again .

I have a 2006 RR (not supercharged)...after a few hours, the vehicle is nearly resting on all the wheels. What is the most common issue I should be checking? I just had the sensor changed out a week ago but didnt change this issue. Thanks

@ToshLubek

5 жыл бұрын

Hi David. Sorry for the delayed reply. Andy is the best person to answer technical questions. If you visit his website www.bagpipingandy.com/ you will find his mobile and email contact details at the bottom of the home page.

we bought the repair parts from you, we checked both times and now there is no electricity in the air suspension

Do you have to reprogram anything when you overhaul the compressor like this? I have a 2003 Range Rover petrol.

@ToshLubek

3 жыл бұрын

Not as far as I know.

hello. I bought this kit and everything works fast but sometime 4 times a week I have error compressor pressure stays constant. do you know what is problem ? thanks

@ToshLubek

7 жыл бұрын

Try contacting Andy Fulton who makes the kit. His number is +44 (0)7767838330 or you can email him at info@bagpipingandy.com

Does it also fit for a Wabco compressor for a 2011 model TDV8 4.4. or do I need a different one?

@ToshLubek

3 жыл бұрын

For more details about the Air Compressor repair kit and further fitting advice visit www.bagpipingandy.com The site also has Andy's contact details so you can contact Andy directly.

When you replace the compressor will it do away with the air suspension fault?

@ToshLubek

8 жыл бұрын

72Disco1998 Yes it should do. Normally the problem is wear on the original piston ring so replacing it and refitting the compressor should sort out the problem. However make sure you inspect the piston and cylinder walls, if there is damage there the problem may persist.

@72Disco1998

8 жыл бұрын

Tosh Lubek Thank you.

Hei. Do you have a code for temperature sensor?

hey andy do you sell the bearing that goes on the piston?

@ToshLubek

4 жыл бұрын

You can contact Andy through his website. You'll find his number and email address at *www.bagpipingandy.com/*

Hi, Any chance you could help - I have a 2012 RR Vogue with the newer compressor. Do you do a kit for that or know anyone who does? thanks, Ian PS The part number is LR41777

Do you have a repair kit for a 2006 range rover hse air compressor

@ToshLubek

9 жыл бұрын

Chris Carpenter Hi Chris. If you visit Andy's website you can contact him from there, his website is the bagpipingandy url in the video description. I know he sells kits that fit Range Rovers but it is best if you check his website. There are links to all the different models and you will find Andy's email address there, alternatively his phone number is +44 (0)7767838330 (you'll find it on his website so I'm sure he won't mind me putting it in this reply).

How to raset airbags using maxicom machine

Tosh will you please cancel my order. I have a 2006 range rover hse. The compressor is not the same. Thanks for your help.

@ToshLubek

9 жыл бұрын

Chris Carpenter Hi Chris. I only produce the videos for Andy and do not take part in taking any orders for him. If you bought anything from Andy's ebay listings you will have to contact Andy himself.

My compressor only runs for about 1 second, then switches off. Suspension stays dropped. Any suggestions anyone?

Great vidi ...... shame about the design ..... ie theirs , not yours , is such pants . Stick a compressor in an insulated , closed box & wait for the money to roll in . You ' d think they were trying to make land fill .

@ToshLubek

8 жыл бұрын

Robert Woodliff You would think that the original manufacturers would know that there is a problem and would either change the design or at least provide replacement piston rings. Until Andy Fulton developed this repair kit the only option was to replace the whole compressor, which is a very expensive job. Although the trend has been to throw away and replace I believe we should return to fixing things, it makes much more sense all round.

كم بار يضغط

I have a factory OEM compressor available for sale if anyone wants to try this rebuild on it. Make me an offer.

@ToshLubek

7 жыл бұрын

Hi Matthew. Andy Fulton (aka bagpipingandy) buys old compressors to refurbish. You'll find his contact details on his website or look as some of my other comment replies.

Not a single bagpipe in the entire video???

@ToshLubek

5 жыл бұрын

No, not a single one. I hope you weren't disappointed. :-)