Vw Polo 1 4 2014 (clp engine) - Water Pump
Автокөліктер мен көлік құралдары
website:- www.vehiclemaintenanceandrepa...
Noises are sometimes difficult to locate, like in this video where it turned out to be the water pump, thanks for subscribing, like and share the video with all you know, until next time, Safe Motoring.
Gary
Пікірлер: 34
Respect. Finally got some one showed me nice and clear pictures as well as good presentation which is most of them music louder than real explanation
@vehiclemaintenanceandrepai3790
4 ай бұрын
Thank You for supporting my channel with your visit and interaction, I am pleased this video was helpful to you. Please feel free to check out the rest of my channel by clicking PLAYLISTS www.youtube.com/@vehiclemaintenanceandrepai3790/playlists for more helpful service and repair videos on most makes of cars available here in SOUTH AFRICA, It is FREE.
Thank you so much Uncle for sharing your expertise.💪🤗🙏🏻
@vehiclemaintenanceandrepai3790
6 ай бұрын
A pleasure, thanks for supporting my channel with your visit.
Thank you for the video. I thouroughly enjoyed it. Nice one uncle.
@vehiclemaintenanceandrepai3790
11 ай бұрын
Thank You for supporting my channel with your visit, I am glad you enjoyed the video, I hope you found it useful and entertaining.
I have the same noise on my car, thanks uncle Gary. You gained a subscriber today
@vehiclemaintenanceandrepai3790
6 ай бұрын
Thank You.
great job mate!
@vehiclemaintenanceandrepai3790
5 ай бұрын
Thanks for supporting my channel with your visit, I am glad you like the video, feel free to check out my channel further by choosing playlists and see more useful videos.
Thanks uncle Gary for the video. I also learnt to replace my fan belt in the process. I have the same engine in my polo vivo, it’s abit tight to work around but doable. I do however believe that the client had the wrong coolant in the car. VWs in general and the CLP engine in particular takes G12 or G13 coolant which is pink or purple. Could that have been an issue of why the water pump failed if the wrong coolant is used ? Thank you for your content. Matt JHB.
@vehiclemaintenanceandrepai3790
Жыл бұрын
Correct Matt it had the incorrect coolant, but I doubt that was the cause of the water pump failure, I think the car did not have coolant in it for a while and it was remedied with a new bottle and green coolant, so the damage was already done.
Hi Gary, have you ever worked on a 2010 hyundia getz? my temperature light keeps coming on and off. what could it be? The car still drives fine and doesn't overheat. Could this be a faulty sensor?
@vehiclemaintenanceandrepai3790
Жыл бұрын
In all probability it is a faulty sensor and needs to be replaced, this was my experience on more than one occasion with the Getz.
Hi Gary, A question with regards to water pump impellers. What do you recommend plastic or metal/brass impeller? Thank you.
@vehiclemaintenanceandrepai3790
Жыл бұрын
In my humble opinion, Noncorrosive metals like brass and aluminum are always the best Rahul.
hello, what could the issue be in a vivo 1.4 2012 when the water in the expansion tank is boiling out of the bottle. there is no water leaks as far as i can see.
@vehiclemaintenanceandrepai3790
Ай бұрын
It could be thermostat not opening, or air on the cooling system, it seems your coolant is not circulating properly, try to bleed the cooling system first
Hello, I have the three hole water pump, but it is a 4 hole. Can I still put it on?
@vehiclemaintenanceandrepai3790
9 ай бұрын
No.
Thanks for the video uncle. I'm guessing the 1.6 CLS engines waterpump and process would be fairly similar?. And the I have a quick question uncle, car sounds like diesel on startup and when warm it goes quiet, would would your best guess be: crack in manifold or timing chain and tensioner? Keep up the good work 👏
@vehiclemaintenanceandrepai3790
Жыл бұрын
It is very similar if not the same, Jacques.
@lutendomunyai6069
Жыл бұрын
Did you get what's wrong with the diesel rattling on cold start? Mine is also doing the same
@vehiclemaintenanceandrepai3790
Жыл бұрын
I did not experience this with the one I servic ed
Hi I have polo 1.4 classic 2000model want to change waterpump
@vehiclemaintenanceandrepai3790
Ай бұрын
Same as the Golf here is a link kzread.info/dash/bejne/aH2Hq9WPabTTiaQ.html Thank You for supporting my channel with your visit and interaction, I am pleased this video was helpful to you. Please feel free to check out the rest of my channel by clicking PLAYLISTS www.youtube.com/@vehiclemaintenanceandrepai3790/playlists for more helpful service and repair videos on most makes of cars available here in SOUTH AFRICA, It is FREE.
What do I do if the bolt broke off and now it's stuck inside the hole how do I remove it
@vehiclemaintenanceandrepai3790
6 ай бұрын
That is always a difficult one, I normally drill a hole in the center of the broken bolt and use an easy-out tool, it does not always work though, a lot does depend on the location of the broken bolt.
Uncle,which price is this water pump
@vehiclemaintenanceandrepai3790
Жыл бұрын
Between R800 and R1500 depending on the make and quality.
Hi Garry, what is the average cost of this job?
@vehiclemaintenanceandrepai3790
3 ай бұрын
Around R2500, includes a good quality pump and anti-freeze. Thank You for supporting my channel with your visit and interaction, I am pleased this video was helpful to you. Please feel free to check out the rest of my channel by clicking PLAYLISTS www.youtube.com/@vehiclemaintenanceandrepai3790/playlists for more helpful service and repair videos on most makes of cars available here in SOUTH AFRICA, It is FREE.
That's giving yourself a burden loosening the engine mounting bolts cos the space still remains limited
@vehiclemaintenanceandrepai3790
9 ай бұрын
It does make the job easier, as is seen in the video.