Thank you very much for sharing. From France.

Hi, do you think you can help me to know in which colors it connects to both the dashboard airbag and the steering wheel airbag? has a way to apply the adapter?

Need to shift SRS on mine. Not sure which pins to use

how did you know what pins to use? mine is a 4 pin connected and i don’t know what one to use

How do u disable curtain airbags with only 2 wires

Hi, I hope you can help me with this.. what resistor ohm i need for seats audi a4 2012 b8 Thank you

Hi, I really could use some help! #goingcrazy I have a 2010 VW Sharan. The new seats in the BACK/REAR do not have airbags but two plugs that need to be fixed :). I bought a lot of different resistors but do not know which one is the right one and which color cables in the plug to connect

Perfect !!! Thank's brother !!!!

@candyman9816

Жыл бұрын

So did it work for you?

Thank you thank you thank you,

Ola buenas keria comentar esa risintencia sirbe para nular cuadelimetro

Great idea... without key.. You have to disconnect the battery and wait at least 30 minutes for any capacity to discharge. Otherwise you may kick off the airbags

@jankindl915

Жыл бұрын

no

Tienes enlace para comprar la resistencia?

@golf Wagen how did you determine what ohm to use?

How many watt 5 ore 10

I’ve removed the airbag seats a couple of times I disconnected the battery then the airbag, then re connected the airbag cables then reconnected the battery, would this method work on the resistor bypass or will I still need to re program

@claustile5122

3 жыл бұрын

Reprogram

I have MK5 R32 2006 Belt tensioner igniter ( driver side) upper limit exceeded code Which resistance should I use to disable code ??

Hi, how did you disable the passenger position sensor?

@user-xj1vs2zk7w

Жыл бұрын

@@candyman9816 no

3,2 OHM 2W 5%

j ai fait sur skoda octavia 2 et ca marche !!!!!

Ahoj prosimtě, chtěl bych se zeptat jaky typ přesně toho resistoru tam máš.

@golfwagen4173

Жыл бұрын

prišiel so do obchodu GM Electronic a povedal som dajte mi 3 ohmovy odpor.

@pajaocz8211

Жыл бұрын

@@golfwagen4173 ok super děkuji 😅

Hi exactly what type of resistor did you use?

@gabo7511

Жыл бұрын

Hhv

i believe if you plug that resister in to a wrong slot,the airbag will pop?if you have a airbag light but not sure if there is an airbag.you just want the light to go off.

@comfortablynumb8832

3 жыл бұрын

How will the air bag pop if it’s not connected you fucking spaz

@sunilbfd5268

3 жыл бұрын

@@comfortablynumb8832 lmao exactly

@richwood4196

2 жыл бұрын

@@comfortablynumb8832 😄😄😄

@Hellohellohello6969

Жыл бұрын

This is to emulate an airbag being there, why would you do this if the airbag is still there?! He is showing you how to fix the light if you install aftermarket seats or steering wheel with no airbag 👍

@Hellohellohello6969

Жыл бұрын

Also that is unlikely to happen seeing as it’s a resistor…

Anyone try this? Would a 4.7 ohm 2 watt resistor work?

@vwjet357

3 жыл бұрын

I tried the 4.7ohm resistor and it worked 👌. I made a plug and play bypass plug with it.

@candyman9816

Жыл бұрын

@@vwjet357 can you explain how you made that plug and play bypass please?

Don't work

@Hellohellohello6969

Жыл бұрын

You mean you couldn’t do it..

@readit945

Жыл бұрын

@@Hellohellohello6969 I just brought new heated seats lol

j ai fait sur skoda octavia 2 et ca marche !!!!!

j ai fait sur skoda octavia 2 et ca marche !!!!!

@santosanto9356

4 ай бұрын

Como fizeste eu tenho o mesmo problema skoda octavia 3 2017 E o banco lado direito tem de ser feito no conector debaixo do banco lado direito ou e tudo feito no banco da esquerda ??