VW Crafter 2.5 Front end removal,Timing belt,Gear box removal part 1
Жүктеу.....
Пікірлер: 14
@jachimritch2601 Жыл бұрын
Wow what a video, every step in detail not skipping a thing just how it should be thanks for this video ma drilla
@moodfixes Жыл бұрын
Nice video and alot of info in it. Is hard to find info for crafter 2.5 engines on the youtube. Thank you for your free visual informations. One question: did y fix that long crank ? and can y explain about it please ? thank you.
@alfjobharris3078
Жыл бұрын
Long crank is due to crap battery. I believe its running a 096 and could do with bigger.
@superwout10 ай бұрын
Is it possible to remove the oil carter from underneath just by loosening the bolts only? I have once removed the engine to change clutch and flywheel and so forth, but never considered removing the carter pan to clean it out after an oil flush.
@charristube Жыл бұрын
did you find the oil leak around the cooler/filter housing? I have the same all covered in oil not sure weather to replace the lot or just gaskets
@alfjobharris3078
Жыл бұрын
If you can get it smoke teated your probably find a air leak where seal has gone.
@charristube
11 ай бұрын
@@alfjobharris3078 got all gaskets changed
@beastylad741810 ай бұрын
Good video and details 👍 I’ve also got a Crafter 11 plate 2.5 runs great’ but as always been smoky when accelerating or idling in traffic’ and only black smoke 💨? Loads of people have looked at it’ but no answers. ? Any ideas 💡 👍
@alfjobharris3078
10 ай бұрын
Does it start ok?
@beastylad7418
10 ай бұрын
@@alfjobharris3078 Yes starts every time’ It’s done 175.000 miles’ But I use a quality oil and a oil additive’s ‘ never go over 60 mph.
@alfjobharris3078
10 ай бұрын
First thing i would do would be smoke test, see if you have any boost leaks
@beastylad7418
10 ай бұрын
@@alfjobharris3078 Thanks How would I know if there’s a leak’ sorry to sound stupid. 👍
Пікірлер: 14
Wow what a video, every step in detail not skipping a thing just how it should be thanks for this video ma drilla
Nice video and alot of info in it. Is hard to find info for crafter 2.5 engines on the youtube. Thank you for your free visual informations. One question: did y fix that long crank ? and can y explain about it please ? thank you.
@alfjobharris3078
Жыл бұрын
Long crank is due to crap battery. I believe its running a 096 and could do with bigger.
Is it possible to remove the oil carter from underneath just by loosening the bolts only? I have once removed the engine to change clutch and flywheel and so forth, but never considered removing the carter pan to clean it out after an oil flush.
did you find the oil leak around the cooler/filter housing? I have the same all covered in oil not sure weather to replace the lot or just gaskets
@alfjobharris3078
Жыл бұрын
If you can get it smoke teated your probably find a air leak where seal has gone.
@charristube
11 ай бұрын
@@alfjobharris3078 got all gaskets changed
Good video and details 👍 I’ve also got a Crafter 11 plate 2.5 runs great’ but as always been smoky when accelerating or idling in traffic’ and only black smoke 💨? Loads of people have looked at it’ but no answers. ? Any ideas 💡 👍
@alfjobharris3078
10 ай бұрын
Does it start ok?
@beastylad7418
10 ай бұрын
@@alfjobharris3078 Yes starts every time’ It’s done 175.000 miles’ But I use a quality oil and a oil additive’s ‘ never go over 60 mph.
@alfjobharris3078
10 ай бұрын
First thing i would do would be smoke test, see if you have any boost leaks
@beastylad7418
10 ай бұрын
@@alfjobharris3078 Thanks How would I know if there’s a leak’ sorry to sound stupid. 👍
How did you take the fan off mate
@alfjobharris3078
Жыл бұрын
Impact gun