this mechanic is truly one of the best I've seen, very careful, double or triple checks his work, doesnt stress, i would 100% let him repair my vehicles if needed..

@OneAuto

7 жыл бұрын

Simon Gard thank you. I appreciate that 👍

@raduflorian7037

6 жыл бұрын

True. If only he weren't so far. Plus i would've lot to learn... cheers mate

Lack of rust over here is what got me back into fixing cars. When everything is seized or fighting you the whole way it gets pretty depressing. Another quality fix

@OneAuto

7 жыл бұрын

Thanks man. Corrosion can bring a whole workshop to a halt with the extra time needed to fight through it! Other times it looks worse than it is.

Thanks for this video! Im a swedish carpenter and i did just replace the weal bearing on my caddy just like this one with help of your video. Thanks alot

@OneAuto

7 жыл бұрын

Hey Andreas, glad it helped you out 👍

great video Rob. Really into your style of editing, camera work with the music. very professional.

@OneAuto

7 жыл бұрын

DIY Carguy Thank you

Nice job! thanks for getting in contact with me. I see even Steve Rob is here!

@OneAuto

7 жыл бұрын

Hey Mike, thank you 👍

Good video ,I had a caddy like that and there was a place on the inside the caliper that would catch pebbles off the road which would proceed to machine the inside of the disc making a horrendous noise.

That vid has amazed me.....how easy the job is, I remember spending ages beating Vauxhall cavalier bearings out....that looks a breeze to do......Great vid thanks...

@OneAuto

2 жыл бұрын

Thanks 😊

Nice video, Rob. After watching most of your video's it's surprising how many of your cars there are very similar to ours mechanically in Canada now. Mostly the model names are different. Years ago our cars were much different than the UK versions.

@OneAuto

7 жыл бұрын

wysetech2000 I think cars worldwide are very similar now. Although Canada and US appear to have larger gas guzzling engines than European vehicles.

Great vid thanks my caddy todo list next

Nice detailed procedure, Rob! Corrosion doesn't look too bad until you get into it haha. That electric impact is impressive! Maybe I should ask for one for Christmas ;)

@OneAuto

7 жыл бұрын

Hi Ivan, thanks very much. Yeh I wrote to Santa and explained that I had been a good boy and could I have one of the new Milwaukee impacts as an early Christmas present... He said yes!!! 😀

Thanks for posting this video. I've got two bearings on my Caddy that needs done and nice to see its a quick job.

@cyruskhalid1693

2 жыл бұрын

you all prolly dont care at all but does anybody know of a tool to get back into an Instagram account? I somehow forgot my password. I would love any tricks you can give me

@maxtonkyrie4648

2 жыл бұрын

@Cyrus Khalid Instablaster ;)

@cyruskhalid1693

2 жыл бұрын

@Maxton Kyrie thanks for your reply. I got to the site on google and im waiting for the hacking stuff now. Seems to take quite some time so I will get back to you later when my account password hopefully is recovered.

@cyruskhalid1693

2 жыл бұрын

@Maxton Kyrie It did the trick and I finally got access to my account again. Im so happy:D Thank you so much, you saved my ass !

@maxtonkyrie4648

2 жыл бұрын

@Cyrus Khalid you are welcome =)

Great Video as always. Thanks

@OneAuto

7 жыл бұрын

Thank you sir.

Well done Rob . Nice editing BTW.

@OneAuto

7 жыл бұрын

Hey Steve, thanks very much.

@TheDisgruntledMechanic

7 жыл бұрын

+SteveRob Man u ARE all over!

I've just started to repair my front left bearing and I began looking at your video... I'll let you know if I went all the way or if it crashed and burned....😎😎

Another great video thank you

@OneAuto

7 жыл бұрын

You're welcome

*Thanks for the video* I have an identical 2010 Caddy Maxi (even same colour!) and I noticed the o/s bearing started grumbling last night. Unfortunately poor health and not having all the tools will mean I need to use a local indie VW garage here in Cornwall, but I wanted to know how hard the job is and get an idea of what I;m likely to be charged. Should an hours labour cover the replacement? I think they're great van and the 1.9 in mine gets an oil change every 10k miles. It's done just over 314k now and is still going well. Anyway, thanks again.

That Milwaukee Impact gun is a beast!

@OneAuto

7 жыл бұрын

It is Ash. It has some serious power!

@ashleyburton8605

7 жыл бұрын

I've got the smaller M18 Impact in 3/8 & have a M12 3/8 on the way! Awesome bits of kit. Powerful, Controllable & great on Batteries! Can't imagine life with out Milwaukee power tools.

Thanks 👍🏻

look from Germany , good video thank you ( danke schön ;-)

Dziękuję ! Thank You !

looks like you may be able to.get away with not takeing the abs sensor out they do tend to snap so less hassle.

Great video - I doubt very much that the torque wrench would've slid in there with the axle still in there as per "the recommended way"!

@OneAuto

7 жыл бұрын

No you're right... I do wonder sometimes who writes this stuff. That was direct from the VW manual via Alldata. Thanks for watching.

@jamesswinyard530

7 жыл бұрын

No problem. I'm a mere DIY'er on my own/family vehicles. But, one of my customers runs a busy garage and has Alldata and some of their information needs some "creative thinking". It's as if the people writing it haven't turned a ratchet before :-)

hello, can you tell me what the reference of the bearing you have mounted ?

Great job :-) You could use a die grinder and an abrasive wheel to quickly remove rust. It's more efficient than using sand paper. Time is money :-) Greetings from Norway.

@OneAuto

7 жыл бұрын

No need... didn't you see how fast I did it!! 😜 Greetings to Norway 🇳🇴

@Krillekris

7 жыл бұрын

I guess you have a point :-P

How did you get the alignment on the ball joint? I usually remove the pinch bolt, then lift off the ball joint / wishbone, so alignment is maintained. I've done this on Mk2 Golfs and Mk 4 Polos. Yet to do a Caddy 2K.

@OneAuto

7 жыл бұрын

No need for alignment on these. Three ball joint studs fit into three holes in lower arm. No adjustment necessary

No toolslist?

I'm surprised that VW isn't bringing these Caddy's into North America... heck, there are a lot of VW / Audi Euro models that would do well here (in my opinion). Ford is selling something here that looks similar. I love how VW / Audi keeps things similar between platforms / generations. A lot of manufacturers tend to "reinvent the wheel" with every new generation of model / platform.

@OneAuto

7 жыл бұрын

Thomas EXOVCDS I totally agree with you, I like how they keep things similar. I thing you have the Ford Connect van don't you? We have it here and it's the same sort of van.

@EXOVCDS

7 жыл бұрын

One Auto, Not sure what it is called here... yeah, looks very similar. Our Postal System uses them.

Doing this job in a few days. Just wondering if I remove the bottom arm would that mean tracking would need to be redone ? Or is that only when steering arm is undone ?

@OneAuto

6 жыл бұрын

Yes tracking would need to be done. The official name for the bottom arm is the 'track control arm'

@kas5857

6 жыл бұрын

Oh ok thank for the reply. I can get away without removing the track control arm the one with the three Bolts as you were trying to do intially ?

Lots of diesels in England. Do u like them better than gas. Or should I say petrol?

@OneAuto

7 жыл бұрын

Personally I prefer petrol. On average any engine component repair costs are lower.

Jak. Vyměnit prahy

Is there any difference between this and the 2011 caddy?

@OneAuto

6 жыл бұрын

Not really, same procedure, either a 3 or 4 bolt fixing

@lanehogger1532

5 жыл бұрын

sneds777 yeah, the 2011 is newer 🤣

Whats the name of the tune at the beginning

@OneAuto

6 жыл бұрын

‘Great Days’ by Joakim Karud