Пікірлер

• 
  @richardalsopКүн бұрын

  Hi Rob , Are you working at NDG still ?? , or from your new garage ?? 😃 ... Regards Richard

• 
  @danielpawowski729Күн бұрын

  Great job👍👍

• 
  @ianmatterson5632Күн бұрын

  when using mine i often get promted to connect the vci with a usb cable, i'll see this prompt when doing various job's, for instance when i try to enter into the CAS module.Have you come across this, and if so were you able to gain that access, i attempted to many time with different usb ports on the otofix but always failed to 'get in', can you shed any light on this issue?

• 
  @StarRosieStar3 күн бұрын

  I used this tutorial for a Ford StreetKA (2004) but used RCA instead of AUX - slightly different way of getting to the CD player and a couple other differences i will list below for anyone interested: unplug the lights and power cable when removing radio unit take off the case on the other side (where the white plastic thingy sticks out, that side) few extra screws to get out the CD player as you’re coming from the other side but easy enough to figure out fed cable out the side next to the lamp plug because i’d already put the CD player back in but that last one was on me 😂 i used a RCA to aux cable instead of aux to aux, it was so fiddly soldering two grounds as i had to use the ground right between the L and R audio, used electrical tape to form a barrier between solders once cool so they didn’t bump about,

• 
  @frederiklansu2703 күн бұрын

  Thanks 👍🏻

• 
  @robbopl4 күн бұрын

  what was the problem with the AC here? How did you diagnose it was the condenser failing?

• 
  @petersoakell69504 күн бұрын

  subbed. thanks for knowledge.)))

• 
  @robinwells88796 күн бұрын

  Thanks for this. Very useful. ❤

• 
  @ashtonwright20386 күн бұрын

  How much should I put in??

• 
  @manoelhoffmann7 күн бұрын

  Yes. This works! Greetings from Germany. Thank you very much

• 
  @ivaylogeorgiev42297 күн бұрын

  Thank you :) One of The limit switch was to unsoldered and bendy ! And the hump can not push it

• 
  @lukenguyen-killeen78038 күн бұрын

  Great video thanks! You talking about putting the logo over Jack’s face reminded me of Monster Inc. where Mike gets the logo over his face on the TV but is still ecstatic he’s on TV.

• 
  @Amazingfeet8 күн бұрын

  Hi just ordered a condenser for ds3 do I need to find specific o rings for the condenser pipes or would o rings from my large selection box work.? Also what is the oil called is it pag.? Thanks

• 
  @davidpardy8 күн бұрын

  Thanks!

• 
  @mrrana636812 күн бұрын

  Hello how are you? Actually I did top up my able water but still show me worming light to top up a blue now show me 1300miles then 1did anther one so now 2 5lt bag I did top up but still show me to top up adblue 1300ml . Please tell me what I can do now thanks

• 
  @OneAuto12 күн бұрын

  Get it to a garage. It has a problem that needs to be diagnosed

• 
  @Denis-fn5pw14 күн бұрын

  Дякую, спробую зробити.

• 
  @JacquesOozy14 күн бұрын

  Could it just happen on very hot days too? I've had a weird issue with my A/C not working when the sun is insanely hot, but it works okay on colder days.

• 
  @OneAuto12 күн бұрын

  Try tapping the relay on a hot day

• 
  @4sk3w15 күн бұрын

  lifesaver! just got back from my garage saying they needed to do additional investigation work on my Civic to fix my A/C issue. They spoke about the clutch not spinning, this corresponded with your video, went out gave the relay a tap. FIXED! 6 years later you've just saved me hours of time and money

• 
  @OneAuto12 күн бұрын

  Excellent 👍

• 
  @xxdeexx834215 күн бұрын

  How do you drain the ad blu tank on c4 picasso grande?

• 
  @yaryar346815 күн бұрын

  could you list the parts required for each job in the description please?

• 
  @NotaBoringLife16 күн бұрын

  Большое спасибо за видео! Очень помогло

• 
  @ianfender814220 күн бұрын

  Thank you very informative

• 
  @TheSarawr8522 күн бұрын

  Mine does this

• 
  @omarbham258023 күн бұрын

  Top man 👍🏾

• 
  @vicenteguerrero719329 күн бұрын

  Mañana me pongo manos a la cenkiu Meri mach

• 
  @miguela.bolanosg.3710Ай бұрын

  Thank you! and great job!

• 
  @russelldownesdownes5618Ай бұрын

  Hi does the filter come with the black plastic top or is it just the filter which places to the plastic top. 👍

• 
  @benevans5012Ай бұрын

  Brilliant video! What's the reason for undoing the starter bolts? Cheers

• 
  @andresilvasophismaАй бұрын

  When you give it the little tap will the ac work?

• 
  @DjSunshine07Ай бұрын

  Hi, I've replaced the blower and resistor and still won't work on setting 4. I don't know what else to do. Works on 1, 2, 3 just fine. Any tips, please?

• 
  @bryanjones1857Ай бұрын

  Absolutely cracking vidio. Verifying my own thoughts .On my own problems .greatly tutored throughout .The mark of a great Mechanical technician. Thank you kindly .

• 
  @stephensharpe6309Ай бұрын

  Will this be the same with a Vauxhall mokka 2013

• 
  @thebanditsixАй бұрын

  Daughters vauxhall Adam , basically same as corsa,blower fan/ air con won't turn off even with ignition off,have to remove fuse to stop it, could it be the heater resistor?

• 
  @nas0075Ай бұрын

  What an useless design. What is the point of this pulley?

• 
  @pjonpspam6640Ай бұрын

  Thank you.

• 
  @MaxHardcoreSLOVAKIAАй бұрын

  if you change the fuel filter on a Seat Altea 1.9TDI, you must first check in your car before ordering the filter what kind of fuel system you actually have installed in your car, because VW used 3 types. 1. If you have a UFI fuel filter system (filter body 3C0 127 400 C), you will use a MANN PU 825 x fuel filter. 2. If you have a MANN + HUMMEL fuel filter system (filter body 1K0 127 400 K), you will use a MANN PU 936/3 x fuel filter. 3. If you have a MANN + HUMMEL fuel filter system (filter body 1K0127400C/E/J), you will use a MANN PU 936/4 x fuel filter.

• 
  @diversaint2011Ай бұрын

  My fan works intermittently. Could it be the resistor?

• 
  @OneAutoАй бұрын

  Possibly but more than likely the motor is sticking. Give it a thump 😜

• 
  @diversaint2011Ай бұрын

  @@OneAuto Wow, thanks so much for amazingly quick answer. Is there any way to stop it? WD40 or something.

• 
  @autobahnwaybab7608Ай бұрын

  Hi i have a bmw 3 series 2008 car. My issue is that i have DTC and the handbrake light (in yellow) showing permanently…..😢 Please help

• 
  @matttaylor7893Ай бұрын

  Thank you for showing this issue, I had exact same fault on a galaxy I just bought and turned out to be the same fuse blown. Much appreciated

• 
  @stuartchester6899Ай бұрын

  Great vid..you obviously know what you re doing.. I don t so I will let the insurance deal with it seeing as they also smashed the rear tailgate glass which is a bigger job. Excess of £400 plus higher premium s ..least I can dream about pulling the finger nails out of the tw,**s who did mindless vandalism

• 
  @gusmo43Ай бұрын

  I have the same problem and I found it thanks to you but 5 wires are cut and I don't know which one goes with.

• 
  @tomicoopzАй бұрын

  @oneauto what did you charge the customer/what should we expect to pay for this? I'm in need of this but its parked up till i can save enough cash

• 
  @AdamColderleyАй бұрын

  Thanks for your video i have done my sump on my punto grande 1.4 petrol your video was so helpful cheers 🍻

• 
  @anwardebdoubi5003Ай бұрын

  👍👍👍👍

• 
  @Wi66proАй бұрын

  Every step covered, great video, thanks👍

• 
  @RetrobeemerАй бұрын

  *Thanks for the video* I have an identical 2010 Caddy Maxi (even same colour!) and I noticed the o/s bearing started grumbling last night. Unfortunately poor health and not having all the tools will mean I need to use a local indie VW garage here in Cornwall, but I wanted to know how hard the job is and get an idea of what I;m likely to be charged. Should an hours labour cover the replacement? I think they're great van and the 1.9 in mine gets an oil change every 10k miles. It's done just over 314k now and is still going well. Anyway, thanks again.

• 
  @jongould3890Ай бұрын

  You just saved me several hundred pounds. Thanks!

• 
  @micah1121Ай бұрын

  Bruh the claustrophobia would kill lol. Great video!

• 
  @pauljackson6593Ай бұрын

  Didn’t like the rain!

• 
  @thomasryan5068Ай бұрын

  Did you not need to release the electric handbrake before changing the wheel bearing ?Great viedo well explained ....

• 
  @OneAutoАй бұрын

  No need to. Cheers 🍻