VR1 BOOST AND ASSAULT BOOST CLUTCH KITS! VELOCITY SLED PERFORMANCE HITS IT OUT OF THE PARK!
Anyone with a boost needs to call Will from Velocity Sled Performance because wow what a difference this kit made!
www.322threads.com/
South Side Sales - Power Equipment, Snowmobiles, Mowers, Tractors and More
546 Curran Hwy - North Adams, MA
Phone:413-664-7111
Instagram- JesseJames322
FaceBook- Jesse James Bonaduce
Merch- www.322threads.com/
Пікірлер: 67
Watching your video's has taken my addiction to a whole new level!!! Thanks
@JESSEJAMES322
8 ай бұрын
Thats what we are here for!!!
Well done. Love watching clutch work. Sled looking great bro!!!
@JESSEJAMES322
Жыл бұрын
thank you! appreciate that!
Great video Jesse. Thanks for all the good info in all your videos.
@JESSEJAMES322
Жыл бұрын
appreciate that!! we are trying!
Good info. I’ll see what I’ll do for my ride
@JESSEJAMES322
Жыл бұрын
Thank you! Give him a shout and get one ordered up!
Great video, looking forward to getting that clutch kit installed on my 850 Boost . Are you going to do a video about how to adjust chain tension . I just changed my chain case oil but was nervous about removing the silencer due to the turbo .
@JESSEJAMES322
Жыл бұрын
You ordered one up?! Love that! And yes that is on the list of videos to do. Actually have to do that this week so should be no problem!
That throttle hang is definitely real my 2020 did it when it was new, after a year or 2 it went away,fast forward the beginning of this year I changed the primary spring and boom it came back again I couldn't believe it! But all's good now but it must have to do with i think too much spring pressure in that Rpm range not letting it pull the motor down at that RPM....
@JESSEJAMES322
Жыл бұрын
These boost hang is very different from a NA throttle hang. These hang because of smart boost issues. Idk what the NA hang from
@youareright5431
Жыл бұрын
Really 😬😬 Yeah there were Alot of guys on hardcore sledder that had the same thing with the N/A s....
is that gold washer that goes on the bushing beside the bearing the fix for the throttle hang? if so does he sell just the washer to fix iut if someone wants to keep everything else stock?
@JESSEJAMES322
7 ай бұрын
there is a service bulletin from polaris regarding the hang. new flash for teh boost. His clutch kit got rid of It but its not just one thing its the whole fix and kit.
Another great video. Does VSP have a clutch kit in the works for the XC 850? Finally took delivery on mine today. Tomorrow is accessory day, and Saturday will be a shake down trail ride.
@JESSEJAMES322
Жыл бұрын
They do! You can give will a call +1 (519) 535-1360 or call Caputo’s performance! Tell them I sent you and they’ll get you all set up
Any video planned for how to adjust the chain tension on VR1 boost?
@JESSEJAMES322
Жыл бұрын
yes its in the works!
Good evening Jesse, I’m a Skidoo850 XRS driver and had the chance to put 200+ miles on an850 Assault last week end. I have to say the most fun sled I’ve ever been on! I thought the clutching was buttery smooth all the way through the power. Thinking of spring ordering one, would you suggest doing the clutching upgrade on just the stock 850 no boost?
@JESSEJAMES322
Жыл бұрын
Hey Mike! Happy to hear that! They are a blast. yes i do recommend clutching even the NA 850's. there is a lot left on the table for them. if you get one reach out with any and all questions i am happy to help!
Just messaged Velocity to order the combo with Fixkit and told them you sent me: Is that the best way to reach them for ordering?gotta get it shipped to Maine. The performance and curing my throttle hang feel would be 👌
@JESSEJAMES322
Жыл бұрын
That works and I would give Will a call tomorrow also! Just to make sure he sees It! But I appreciate that!!
Just bought the full kit from Will and I'm switching the gearing from the 23 to a 22 tooth on my 129
@MOP0WR
Жыл бұрын
Is this for more top end speed? Can you reuse the stock chain?
@christopherbita8045
Жыл бұрын
What's the benefit to this?
@billslabich6543
Жыл бұрын
Combination of better corner to corner launch, better for my 240lb weight. Lose a touch on the top end but quicker to 1000ft. Still around 117mph with shift out
Do you know of a good kit for the 650? I'm looking for more throttle response and bottom end bite. 60% of my riding is ditch banging. Hardly ever see speeds above 60
@JESSEJAMES322
Жыл бұрын
i would call Bruce at SouthSide Sales a call. he will be able to get you something together
@JESSEJAMES322
Жыл бұрын
Have you get entered in the channel giveaway? you could win a set of C&A skis, Woodys carbides, Woodys studs, Rox Speed FX hand guards and a $200 gift card to Southside!! anything purchased off 322threads.com gets you entered!
would you happen to know what size the hex head is for the primary bolt. my sled is up north and i want to make sure i bring the correct tools thanks
@JESSEJAMES322
Жыл бұрын
12mm. i believe i said that in the video. if not my bad
@kipprammler5549
Жыл бұрын
@@JESSEJAMES322 i did not see that in the video but thank you..
@JESSEJAMES322
Жыл бұрын
i went back because i swore i put it in there and i did. right at 3:48
Any idea if VSP has a tune set up for the boost yet ?
@JESSEJAMES322
Жыл бұрын
He is ready! I have the whole set up and just need in put It in!
@JESSEJAMES322
Жыл бұрын
Have you get entered in the channel giveaway? you could win a set of C&A skis, Woodys carbides, Woodys studs, Rox Speed FX hand guards and a $200 gift card to Southside!! anything purchased off 322threads.com gets you entered!
It’s amazing with all the money & Technology that Polaris has they can’t make the clutches work like this kit does??
@JESSEJAMES322
Жыл бұрын
For the normal person they work great. For the performance people that want It the best we have to tweak It. Story of our lives
Don't forget Will suggests balancing after installing the new cover plate
@JESSEJAMES322
Жыл бұрын
He does but not needed so I’ll let Will have that convo
Why is there an adjuster bolt in the secondary?
@JESSEJAMES322
Жыл бұрын
Balance It back out.
Why not remove the whole primary vs leaving the inner sheave on the sled??
@JESSEJAMES322
Жыл бұрын
To get to the point of being able to put the puller in 90% if the stuff has to come off anyway so it’s pointless to take the rest off
Well past registered trail speed. GIVER 😝😝 Great vid need info on cornering. Some of my customers are old like Bruce ha ha. They are having hard time on machine.
@JESSEJAMES322
Жыл бұрын
This was in Mexico! No speed limits there! What info do you need on cornering
@leodurivage4411
Жыл бұрын
@@JESSEJAMES322 How to setup the suspension, VR1 BOOST.
@JESSEJAMES322
Жыл бұрын
we've done a ton of videos on that. go to my youtibe page and look at past videos. there are a ton
@leodurivage4411
Жыл бұрын
@@JESSEJAMES322 Yes I forgot, long days doing recalls. Watched them help out alot. Thanks
Doesn't Velocity Sled have a website? I can't find it.
@JESSEJAMES322
10 ай бұрын
they do not. they only have a facebook and their is a phone number on there that you can call
do they make any turbo or boost kits for a 2021 650 indy xc
@JESSEJAMES322
Жыл бұрын
not to my knowledge
@hungrypigsfarm2959
Жыл бұрын
@@JESSEJAMES322 Thanks buddy love the chanel and info, would be sick if they made a nice little turbo on a 650 would be fun !
@JESSEJAMES322
Жыл бұрын
Have you get entered in the channel giveaway? you could win a set of C&A skis, Woodys carbides, Woodys studs, Rox Speed FX hand guards and a $200 gift card to Southside!! anything purchased off 322threads.com gets you entered!
Does the kit come with instructions?
@JESSEJAMES322
Жыл бұрын
It does not. This is the instruction video to go off of and you can always call Will if you have questions
When are you going to be up riding on the Tug?
@JESSEJAMES322
Жыл бұрын
Here now
I was interested in the velocity big wheel kits but I'm not on Facebook or any other social media sights,is there any way for us to call for parts thanks 👍 Hope Ryder is doing good she going to be like my female Frenchie she's a lunatic!! My boy is more like Nash just sitting looking around 😂😂😂
@JESSEJAMES322
Жыл бұрын
+1 (519) 535-1360. Tell him I sent you. Ryder is doing great!!!
@youareright5431
Жыл бұрын
Thanks 👍👍
How can I order one from you ?
@JESSEJAMES322
Жыл бұрын
Gotta give Will a call. (519) 535-1360
if this is the bees knees fix all why didnt u say how much it was???
@JESSEJAMES322
Жыл бұрын
not my department! Give Will a call and he will gladly go over pricing and options!