Love your vlogs they are informative and intelligent. Nash is a fun add too. And I love when your girl helped on the skis. Great channel.

@JESSEJAMES322

3 жыл бұрын

Thanks Eric i appreciate that! More to come!

Keep up the good work Jesse - putting some of the best stuff out there👍

@JESSEJAMES322

2 жыл бұрын

Thank you Brett! Much appreciated!

I just want to say thank you for the clutch video. It help a lot. Keep up the great work. Thanks

@JESSEJAMES322

3 жыл бұрын

Anytime glad it helped! Thanks for watchig!

Holy shit! Thought you looked familiar! Ive watched like 6 of your vids and i couldnt put my finger on it. Awesome man, good content.

@JESSEJAMES322

3 жыл бұрын

Hey man! Where do you know me from?! Appreciate you tuning in and watching!

The odd splines on the clutch are referred to as Boss splines. Also just my findings from over the years, just go straight to heat. About 10-15 seconds a screw with the blue loctite does the trick every time. Just a regular torx wrench/ratchet, after the heat. I am no clutch guru, just sharing what has worked for me. Keep up the videos, fully enjoying them as I wait for snow up on the hill/old forge!

@JESSEJAMES322

3 жыл бұрын

Appreciate the insight! Hoping the Hill gets some snow soon so I can test thing thing out!!

Another great video, thanks for posting!

@JESSEJAMES322

3 жыл бұрын

Thanks Chris! Appreciate it

great video sleds coming right along

@JESSEJAMES322

3 жыл бұрын

Yessir! Excited to get him on the snow. Thanks for the support!

Great Info! Thanks!

@JESSEJAMES322

8 ай бұрын

anytime!! happy to help!

Great and helpful. Do you remember if your primary was off balance when you sent it away. Some say you don't need to balance if your changing the cover on the p85

@JESSEJAMES322

9 ай бұрын

thank you. And yes the primary was way out. see video below showing how off it was. any questions let me know! kzread.info/dash/bejne/pmyovMSOmtKWmZc.html

Bruno will be a (PRIME) after all that transformation lololol great job Jesse

@JESSEJAMES322

3 жыл бұрын

He should be rowdy thats for sure!!

Any chance you’d be able to share the retail (not expecting you to divulge your personal expenses), just an idea of the cost to do what you’re doing to the sled. Love the vids .. I ride the tug, really hoping to run into you up there in a few weeks. Stay safe!!

@JESSEJAMES322

3 жыл бұрын

Hey Chris. Are you wanting to know what just the clutch kit was or what i have total including everything ive done? Either way im happy to share. Hope we get some snow soon and i run into a bunch of subscribers! Appreciate the support!

Great video! Do you have any experience running the Bikeman Stage 2 clutch kits? Just curious how it stacks up against the kit you put in?

@JESSEJAMES322

2 жыл бұрын

i have not run any Bikeman stuff over the years im sorry!

Haha you sound like me when it comes to clutching. All I worry about is my suspension 😂

@JESSEJAMES322

3 жыл бұрын

Im good at understanding the clutches and telling you how they feel but as far as explaining what or how they work.... past my pay grade hahahah. Suspension video coming soon though!

Not gonna give up that info on the settings, thanks for helping out, nice shop and tools but that's about all. Keep your marker sharp.

@JESSEJAMES322

3 жыл бұрын

Hey Mike I feel some hostility in your comment and I am unsure why. If It was my R&D and my set ups I could care less who I tell but they aren't mine so its not right for me to give them out. Again if you want to call them and they give It to you thats on them but I wont give out what their kits come with. I wish you the best of luck in 2021!

@mikecrevier4686

3 жыл бұрын

@@JESSEJAMES322 Didn't mean any offense, I'm running a Yamaha sidewinder with full bolt ons from Tubro Dynamics. Everything was explained to me for my initial set up and I could play from there. R and D is what manufacturers do, just my two cents

Might want to use a bit of plastic pipe over the coarse threads on the rod while compressing the primary …rod threads are sharp and can cut / burr the washer in the cover

@JESSEJAMES322

2 жыл бұрын

not a bad idea!

Good work 👍

@JESSEJAMES322

3 жыл бұрын

Thank you! Much appreciated!

You should always use heat to loosen lock-tite bolts or you may damage the threads!

@JESSEJAMES322

3 ай бұрын

truth!

Great video..do these require clutch puller to get off sled?

@JESSEJAMES322

Жыл бұрын

thank you and for the primary yes.

Awesome content. All of this is doable with a little mechanical ability. I thought it would be super complicated. Do they send torque specs with this stuff or is everything 3 ugga duggas lol

@JESSEJAMES322

Жыл бұрын

I’m a ugga dugga type guy but primary torque is 80 foot pounds and the secondary I believe is 30. Don’t hold me too that

I have a 2022 indy sp with stock gas shocks dual 6 inch carbides 2 studs per window its killing my arms in the stutter bumps would softening front springs help

@JESSEJAMES322

2 жыл бұрын

thats where i would start yes. there is no shock adjustment on them right?

@rickhesli9249

2 жыл бұрын

@@JESSEJAMES322 right thanks for comment i enjoy your pods

Good video 👍👍👍

@JESSEJAMES322

3 жыл бұрын

Thank you!

Do you know where I can find some cool bar pads for my sled?

@JESSEJAMES322

3 жыл бұрын

RSI Racing has some sweet new designs. Fly Racing i believe still has them.

Ive been having serious trouble getting my primary clutch off my 2020 assault 800. Even bent my puller. Any tips?

@JESSEJAMES322

Жыл бұрын

I would try to heat the hell out of it with a new puller. SOme may say the water trick. Flip the sled on its side. take the bolt out. wrap the treads in tefflon tape. fill the bolt hole with water and put the bolt back in. ive never tried it but some say it works wonders

@ntsledders

Жыл бұрын

You don’t really have to take the primary off to do the clutch kit on the primary

@nesledder6094

Жыл бұрын

@@ntsledders I was looking to also replace the motor mount behind it. Ive got 4100 miles on the sled and dealing with a long end bog.

Does anyone know how to read the codes form the 7S on a '21 VR1 850? thrown a code and have a list but i dont know what the current code is. any help would be so awesome. thanks

@JESSEJAMES322

2 жыл бұрын

I would recommend calling the dealer you bought the sled from

Happen to have recommendations for a stock 600?

@JESSEJAMES322

3 жыл бұрын

I do not but Caputo may or Bruce from South Side Polaris!

Do any riding yet? We had tons of snow in pa. tons of trails in Potter and Lycoming County

@JESSEJAMES322

3 жыл бұрын

Not yet! My plan is to be on snow this upcoming Saturday!

@bigmurph1447

3 жыл бұрын

@@JESSEJAMES322 you going to go to tug hill? we put on 200 miles this weekend. We had 18 inches snow. We went to Potter County on Saturday they had between 24 to 30 inches of snow.

@JESSEJAMES322

3 жыл бұрын

no my plan is Lake George but looks like Friday weather could really ruin all my plans... hoping It changes

@bigmurph1447

3 жыл бұрын

@@JESSEJAMES322 yeah doesn't look good. You should of came to pa last weekend. You just hop on i80 and come west to mile run there's a big parking lot right off 80 probably about 2hr drive for you.

How did you expect this to change the performance of the sled? More top end.... more corner to corner speed... ???

@JESSEJAMES322

3 жыл бұрын

all around. This clutch kit was designed to improve all, not just one task. I was very pleased with it this year. Ran great top end and i never had a corner to corner issue.

@gspirit63

3 жыл бұрын

@@JESSEJAMES322 Perfect... I have a '22 VR1 850 on order and have contacted Will at VSP... looking forward to it.

How do I get my hands on a clutch kit from them?

@JESSEJAMES322

3 жыл бұрын

If you are in the states call Caputo's performance and talk to Johnny. They do not have a website just a facebook but all contact information is on the page. Hope that helps!

How do you know your gains from stock with everything you are throwing at this? Just sayin' Nice vids tho.

@JESSEJAMES322

3 жыл бұрын

Past experience. Trust in your Performance shop. I have faith all will work and i will line up next to a stock sled at some point and then we'll really see. Appreciate the support!

What’s up man

Why put a kit in if you havnt rode it yet ?

@JESSEJAMES322

3 жыл бұрын

Ridden enough factory sleds to know that there is performance left on the table. Also working with quality performance tuners know what they can get out of the sleds! All in fun though just like making it my own! Thanks for the support!

What clutch kit is that?

@JESSEJAMES322

3 жыл бұрын

Velocity Sled Performance Kit that was purchase through Caputos Performnace!

@brandonrichard1214

3 жыл бұрын

I reached out to them. They are still testing? I guess weights are 68grams. Waiting for test results. I am ready for one

@JESSEJAMES322

3 жыл бұрын

Who did you speak too? Johnny deals with all US customers and Will deals with all Canadian customers

@brandonrichard1214

3 жыл бұрын

@@JESSEJAMES322 not sure. I messaged him thru some social media platform. Maybe faceplant. He has a red and black 650 maybe. He said he has weights dialed in.

@brandonrichard1214

3 жыл бұрын

Is that guy John. Called turbo Jonny? He loves ski doo

isnt the 'x' the mark

@JESSEJAMES322

Жыл бұрын

but have to mark the other components

This guy used to race but he says he is not an expert or professional . Guess he is best at flipping burgers .Best talk to a true pro when it comes to working on clutches !!!!!!!!!!!!!!!!

@JESSEJAMES322

3 жыл бұрын

my favorite part about having a youtube channel is reading the stupid comments people leave. go troll somewhere else

@russellvandenbrink8996

Жыл бұрын

Yet he did everything the way that an expert or a professional would 😂