This makes more sense than any other voice eq video I've seen. Well done!

@n64slayer

Ай бұрын

Except the fact it doesn't work

Thank so much! I watched this until the end since I have been having problems with my mic, my voice is really soft when I talk to friends so this video really helped me 😄😄😄

This is the most helpful video tutorial i watched, with a little bit of sound engineer lessons, thanks man keep it up

My voice was so muddy and didn't come through loud and clear. This was so helpful I figured out the best settings for my voice. Thank you!

Bro thank you I mean seriously thank you I was struggling sooo much and my Vedios weren't producing enough sound this really helped me man Keep up the good work your really doing everyone a service

Hi! Thank you so much for this tutorial! I just got this program so I didn't have to worry about buying new equipment and I really didn't know anything about this kind of stuff so you really helped me out!

Wow, just awesome video, man. Congratulations and keep up the great job :)

A very good phrase to use while testing for your EQ peaks is: The quick brown fox jumped over the lazy dog. You can follow it up with: She sells sea shells by the sea shore. The first phrase covers a wide spectrum of sounds, and is good for general EQ. The second in particular will help with your highs.

Thank you so much! This was the best video I've found and now my mic works.

Finally, A good informative video after years... YEARS mate.

@NORCLA

3 жыл бұрын

Thank you for the kind words ❤️

Always try cutting frequencies first instead of boosting. You can start cutting out mids first and this will naturally boost the low and high ends at the same time, while staying zero’d out. Tweak and tune, record your voice with and without gameplay, and don’t rush it 💪

@Loopyllu365

Жыл бұрын

what I was gonna say😂

This helped me out a whole heck of a lot, thank you!

Thanks for sharing, I know you spent hours learning this. But us, we just learned it in 5mins, That's generosity, Thank you again sir.

awsome work bro i watched so many vids on voice meter and it never worked for me but you video was perfect and easy to understand, keep up the good content 👍.

awesome, basically what I am looking for. new gamer/streamer here and this really did help me a lot.

Your video helped me understand audio equalization. I hit the like button. I pray the algorithm notices your video. Thank you, sir.

Very informative! Successfully set-up my BM-800 with Voice Meeter because of your video! Keep it up! New subscriber here!

Alright botha I hardly leave a shoutout unless the youtuber has stellar info - bro you killed it. You the man. Keep rockin - for everybody else make sure to watch this video from start to finish...I repeat START TO FINISH otherwise you will surely miss out on key factors. Good Luck to all

Super interesting. I didn't know I had to do that. Thanks for sharing!

Quality content 🔥 Deserves much more response on this. Loved it ❤️

Thanks! Very comprehensive! Best in Class

This helped a lot. Way to go, buddy!

Thank you for this one, this has helped me alot!

He clearly cares about his viewers with how much he didn't want us to copy paste the eq settings :)

This was awesome. keep it up man

Working on my EQ process because of this. Thanks for the tips and tools!

Great video! I've always had trouble with EQ-ing audio whenever I make videos and this definitely helped me a lot! Anyway, an IMPORTANT NOTE TO EVERYONE. You have keep the Audio-Graphic EQ open because it won't work if it's closed. That means that you have to keep launching it every time during start up (which is annoying) and I hope Voicemeeter does something about it. I've definitely had moments where I thought my mic sounded great but had my EQ off while recording gameplay.

@channelname8623

Жыл бұрын

thanks i looked for the answer to this any couldnt figure out why the changes wouldnt save after closing the eq window. seems like a huge oversight by voicemeeter xD

@omniversalnihilist

6 ай бұрын

For anyone in future you can just right click VB-Audio Graphic EQ 15 and press show app on startup.

Thank you! I am trying to setup a cheap Tonor mic. This made it totally workable until i can justify a better mic. Plus these skills are needed for any mic.

very clear, thank you!

Thank you for this. Complete newbie here!

Thank you Norcla, don’t need it now, very good if I do later on 🙂

Hi NORCLA! Do you have any tips on fixing mic distortion using voicemeeter? I am really having a hard time messing with it even though I have my mic in a distance.

Thanks! This method is so simple and intuitive! thanks for sharing your knowledge.. keep it up

lots of good info, thanks!

You Saved My Time , Love you so much man 💥💖

Great video and content. I really learned a lot...

holy, dude your explanation is amazing i understand you more than understanding indian people on youtube...

@NORCLA

3 жыл бұрын

Thank you for such an awesome encouragement!

I check your content whenever am having problem setting up my BM-800 lols

@NORCLA

3 жыл бұрын

Thanks for the kind words!

i freaking love you , new subscriber

good vid. helped me fix issues. I liked

Hi. What software are you using for the quick close-in s during the tutorial? Do you do it manually?

Thanks Broo, it helps a lot

cool guide thanks

nice boss norcla it really helped me alot (tvs member btw AHAHHAHA) THXXX!

@NORCLA

3 жыл бұрын

Welcome!

very helpful

thank you so much! i lub you

@NORCLA

3 жыл бұрын

MrHydraulic!!!!!!

great!

you are the best person ever

Excellent tutorial/video. Well done. U have a question. Why does the audio graphic eq 15 have a separate label for each bus, and an ignore check box...when they don't work? The settings I apply effect each bus, all the selector does is select the active one.

thankyou , godbless you !

looking at the EQ. it effects the whole virtual output? so you would have to use up 1/2 of your Outputs to dedicate one for just mic audio? is that accurate thanks

Do you also have a V8 Soundcard where you plugged in your microphone? or you directly plugged it into your computer?

so once youve fine tuned the EQ how do you apply it to the mic? I can listen to the changes in real time but once i close the eq 15, the settings are gone until i open it again.

Thanks fo this video, very helpful. I have the BM800 mic, and I am setting up my gear to start lives dj mixes on twitch. I don't know how to set up OBS and voicemeeter to be able to play music at heavy level and don't have the sound going through the microphone, but be able to speak on microphone...thanks

Do I need to keep the 15 Bands EQ's window running for it to apply? When I close the eq it just resets to normal.

Hello! The microphone that i'm using is the Fifine T670. I did an audio test using obs studio and voicemeeter but the audio is very choppy. Is there a way to fix it? :)

Hello! What audio processing programs do you recommend for Macs, I'd have loved to download Voicemeeter but unfortunately it's not available for my MacBook

Hello, I’m using a RODE wireless go and it’s pretty much blank for the low and high frequencies. Does that mean I only have to work on the existing ones? I’ve spent an hour on this already and it only sounds like I’m on the other end of a phone call. GREAT video by the way!

hi great video i found it really helpfull, i just wanted to know what input you use with spectralissime is it just your mic or is it a vb audio virtual cable?

@NORCLA

3 жыл бұрын

Microphone!

do I have to keep the EQ 15 tab thing open to keep it in effect?

Thanks. This video is all I need to use voicemeter

Should I put the output on Vb input if I'm using audacity to record a voice over???

the typical pinoy accent xD love it! thank you for dat tuto :D

How did you remove the static noise from BM800?

this is a nice video and good explanation but please can you teach us to do only simple eq like high mediums and low bass ? only like the 3 simple ones ?

It might be a stupid question im not sure it works or not but my mic goes out through b3 in potato, do i need to select the b3 then ? also i notices my mic is too slow to cut off so there is noise at the end how do i change that? (read about changing the gates closing time but i cant figure out where to do that ) or adding an expander (there isnt one in voicemeeter so not sure what to get for that)

Whenever I close this Equalyzer, the sound goes back to what is was before. How do I save these EQ settings?

In VOICEMEETER, when i set hardware out option to "cable input VB audio-virtual cable" theres no sound coming out my speakers

Thanks for sharing very informative video lods

Pog! A7s3 is next!!!

@NORCLA

3 жыл бұрын

Uhhhh. I think I need a separate streaming PC first 😂

Can you use voicemeter and v8 soundcard at the sme time?

Very helpful vid! And one question, how are condenser mics properly placed?

@NORCLA

3 жыл бұрын

Depending on the pickup pattern and orientation :)

what do you set the default playback/recording devices on on Windows? Because I can't hear myself!

Is it okay that I can’t hear my self thru obs when I turn on audio monitoring ?

Thanks alot but was just wondering how do i cancel down my background noise like my fans typing clicking you know

Hey all, how do I apply EQ ONLY to my MIC, intead of applying it to the whole A1 track??????? I don't want like spotify , Chrome and Zoom to be eq.

The same process applies to Laptops as well, right?

set it up exactly how you did but then a few days later without messing with any of the inputs, in control panel i can only get cable input in the playback section and the output in the recording section so i cant select vb cable input in discord or obs and output is the only option for microphones

My mic didn't show any diference using VB Audio Graphich EQ 15. I notice that it change my Audio EQ not my Microphone EQ. How can i solve that? I already marked BUS B1 where my mic is located.

I have a question, in the EQ you can choose the "BUS" are the changes only applied to the selected "BUS" or can i applie changes on all "BUS"?

How do you open the equalizer on the bottom left?

I've set up voicemeter many times. I use it to spam music in voice chat in games. Whenver I try to sing along with my soundtrack, my vocals are always delayed. How do I set it up so I can sync with my sountracks?

Audio comes out robotic and lags when I listen to it on discord or OBS. I had to switch the input to MME since WDM made it sound much worse. Any way to fix this?

hello, if i only use 3.5mm jack cable , didn't i need to install VB-cable ?

How do you get the 15 band to Automatically start and active with voice meter ? I set voicemeter to start automatic when I turn on my computer but I caNoT get the 15 band to start and activate within voicemeter also?

how to add reverb this softwre while using reverb ..and what are the frequencies for while we sing in club house

Is it always on when start up in pc or I need to open it everytime I open my pc?

just wondering i made a perfect config for myself but every time i want EQ on i have to open the EQ15 by myself , is there any ways to make this app open on startup ?

I tried with the vb cable but it's constatnly choppy =(( any fix on that? but i switched to my headphones/speakers but it was fine, may onting echo lang

Sounds great until I set it on the v cable input, then it just reverbs and cuts out constantly using evo4 interface. Plus having pc set on on v cable, audio won't play back unless I cycle it everytime for apps. Audio doesn't work at all with games.

I love you ❤

@NORCLA

3 жыл бұрын

ily2 :D

Hi, guys! I was trying to trust the process but I am having a hard time, with the first steps. I am getting the sound but it is likea a heartbit cuts muy voice and sounds terrible. I'm using a Razer Siren X. Any comments or tips will be valuable!

Is your background your desktop or chroma-keyed in post? Awesome video, great info thank you!

This is great as I've been wanting to learn how to EQ my mic, and many guides are male speakers. But this example along with Spectralissime will really help me with my own female voice. I do have a question, though. I also use the Intellipan to change the colour of my voice. Should I use this together with the EQ? Or should I focus on the EQ only? Thanks.

@NORCLA

3 жыл бұрын

Hi Lizzie, use one or the other!

@nikosleft811

2 жыл бұрын

@@NORCLA For me my voice sounds crispier when using both, is it necessarily a bad thing using both?

Hi! what camera are u using? thankss

Does this work if you use your smartphone as mic with WO MIC

will this solve the noticable sibilance you get from the Rode Procaster?

What can I do to use an EQ to change what I'm hearing through A1?

i have my rode hooked up into my onyx preamp as well as my dt 770 pro. i pick the mircophone in 1 hardware input and the vb cable in the hardware out. when i do this i cannot hear anything anymore.

I use the beats studio 3 would that be ideal for finding my voice in an accurate manner? Cause to my ear it sounds pretty level on the highs and lows the mids sounds pretty good as well. But it's as close as I can get. Plus I'm using this program for music production purposes and Livestreaming as well video recording. I just want to get the most out of this program. I need a noise gate, compressor, gain control, limiter, and a equalizer for the best quality audio. But I need it to sound clear and not basey in the low end but more equal to the ear in lows highs and mids. I'm very picky when it comes to recording. But also would like that high end feel. I use the Shure SM7B, and Shure SM57 for vocal recording and streaming. I don't use a cloud lifter for the simple reasoning Shure themselves told me it wasn't a need just a good end mixer and I bought what they recommended me. So all I need now is a virtual mixer that can do all of those things I previously mentioned.