You do not need to test all your fire hoses at working pressure every year only 20% and make a record so all of them are tested in a 5 year rotation .

This is a great help! Really! I’m freshly promoted third officer so I had random thoughts on what or how things should be done first since I’m about to board a newly takeover vessel and I overthink to much. Thank you and more power to you and to all of us! ❤️😊

Just a little advice, please open hydrants cover from little bit near of hydrant not opposite of it with "fire hydrant spanner" for protection any injures. Couse it can maybe thrown by pressure inside if any. (at 3:28 minutes) Have a nice watch :)

Dear Showandtel, Congratulations! You inspire. I would be proud with a daughter like you. God bless you!

Your doing a great job, and you have the guts to make a video of your work on onboard. Great stuff. Watching all the way from Papua New Guinea. 🇵🇬

The fact that you teach in English, you earn a new subscriber. Waiting for more informative contents like this

Galing magEnglish ng partner na Maam! Thumbs up to that guy! NakaEnglish accent pa! Nice!

@ShowandtellShawntel

3 жыл бұрын

Hahahahahha, makakarating sa kanya ang comment na to sir 🤣🤣🤣

Best videos very helpful

WOW! sobrang laking tulong sa amin lalo na sa mga aspiring third officers. Thank you so much maam! #qualitycontent

@ShowandtellShawntel

3 жыл бұрын

Thank you sir. Buti naman at may nakakaappreciate din. 😅😅

Searching for gmdss tests procedures and i found myself clicking each of your informative videos. Congrats 2nd!hoping to be 2nd someday.Cheers!

As a finishing touch, its also good to apply air in the hoses to remove/drain water from those hoses faster :)

My suggestion is to do it evry 3 mons per department..accom,deck,engine and cargo holds..pra hindi mabigat pgkuha sa lahat ng hoses sa buong barko..pero ang galing nyu

It will help a lot. Million thanks goes both of you ❤

Hi ma'am! Your content was really helpful to aspiring officers. It was demonstrated very well, ma'am. Content suggestion: Binding a new fire hose to a coupling. It might be simple to some, but it would be of great help for starters and refreshers. 🙂

@ShowandtellShawntel

3 жыл бұрын

I've been thinking of doing this sir. Hopefully on my next vlog 😊 Thanks for the sub.

Pogi mo sir Reluya hahahaha

@antonreluya4147

2 жыл бұрын

Pag sure lagi! Hahaha mas pogi mo 😁

Mission Accomplished 🔥💥

@ShowandtellShawntel

3 жыл бұрын

Thank you so much 👩‍✈️

nc third. thanks for ur vids. newly promoted po ako na 4th off need ko tlga neto mga diskarte salmaat sa video nyo mam

@ShowandtellShawntel

3 жыл бұрын

Salamat sa pag.appreciate sir. 😊

💕💕💕💕

Hi. Thank you for the helpful video. I have one question about the drying procedures of the fire horses. Usually, I dry them in unfolded condition and hang them through railings. Is it enough to dry fire hoses under the sun in a folded condition?

First subcribe mam,,von voyage god bless us..

Good job🇮🇩👍

Hi maam,sobrang laking tulong po ito and very useful ma'am,salamat po and god bless you always and always healthy.❤️👍🙂

Very informative. Thank you Ma'am. 🥳

good job !

@ShowandtellShawntel

3 жыл бұрын

Thanks!

Wow how nice im a 3rd officer too that pressure test is one of the heaviest physical job, but seems u knw ur rhythm to smooth that color orange fire hose u knw it madam. 😁

Great lesson 3rd. See u in Okada for cheers!! Kkkk

@ShowandtellShawntel

2 жыл бұрын

Hahahhahahaha, thank you sir 😊

Thank you ...

👌🏻👌🏻👌🏻👌🏻👌🏻 great

@ShowandtellShawntel

3 жыл бұрын

Thank you for the support 👍👩‍✈️

Informative tutorial 🤗 Keep it up Sir regarding 3rd mate related more videos 🙏 💞 from 🇧🇩

Hi, pls show how to do fire isolation valve testing on the fire main line and how to repair should any leaks be detected . thanks.!!! take care.

Thank you showandtell shawntel

@ShowandtellShawntel

2 жыл бұрын

Thanks

Grabe ka power 😍😍😍 Supporting you 💯 percent! Very informative. Can you make a video of the different fire extinguishing agents you have onboard? Fixed or Portable 😊

@ShowandtellShawntel

3 жыл бұрын

Sure thing mamsh. I'll do that on my next monthly. ☺ Thank you so much for the support 👩‍✈️

Nicely done 👍🏾👏🏾

@ShowandtellShawntel

3 жыл бұрын

Thank you! Cheers!

best videos and very helpful. i hope u will come back early and i can study more from u

God Bless you always nhak❤️

@ShowandtellShawntel

3 жыл бұрын

Thank you nay 😘

@irenetalorete8995

3 жыл бұрын

@@ShowandtellShawntel you're always welcome nhak😘

Nice one I like ur video, tnks a lot. Please I need u to do a video on how to do annual inspection and maintenance of FM 200 system.

In my final shipping company SMS we had lifeboat drills and fire drills once a week, I was alone, had no helpers on all safety-related tests, checks, and works, all firehouses test every 3 months, and all fire extinguishers maintenance had the same timeline, other safety equipment much less time, every 3 months a complete record of that to master to sign, any mistake found, expect a verbal scolding by C/O, NEVER AGAIN BACK TO SEA, bridge paperwork, continues chore. lookout useless.

Fantastic sharing, you got yourself a subscriber. Please continue creating such content! How about an inspection for lifeboat?

@ShowandtellShawntel

3 жыл бұрын

Great suggestion! Will keep that in mind on my next vid.

Hello! I have a few questions for you. 1. I found out in some different youtube channels instructing how to pressurize test the fire hose, they do "shut off" the stream through nozzle and check the water pressure through a gauge indicator. In your video, such action as shutting streaming off through the nozzle have not been carried out. What is the difference? Do fire hoses have to maintain full fire main pressure when nozzle shut off or not? 2. In my internship term, we had carried out pressure test of fire hoses by just linking the fire hoses to the fire hydrants and inspected if the hoses leaking. But we had not a pressure gauge somehere or a digital pressure indicator just as you have in this video. I think our test sucked. But do you think our test we made during my internship term could pass the pressurize test criteria or not? 3. As I mentioned before, they shut off nozzle and read the pressure through a gauge. And that sound kind of weird to me because where all of those pressurized water go when they shut off the nozzle? It must be very dangerous for the fire main system.

@ironmatic1

Жыл бұрын

No, they don't. Hoses loose pressure when flowing water due to friction.

nice video ma'am. pwd request kog unsaon pag stencil sa survival crafts nga dali ra. pati sa lifebouys. hehehe salamat daan ma'am. :D

Please send my regards to my junior

@antonreluya4147

2 жыл бұрын

Hi sir!!! Ngayon ko lang nakita! Hahaha Kamusta po sir? 3rd na rin po ako ngayon awa ng Dios

Have a great day

🔥🔥

@ShowandtellShawntel

3 жыл бұрын

🥰🥰

Hello ma'am, Great Video content. Can you please make a video on how to change the gasket of the fire Hose. Thanks 🙌

Testing at full main pressure should probably be done with the nozzle shut off. Otherwise it is less than full pressure. Do you really take ALL of the hoses at once? What if there is a fire during the test? I'd probably do 1/2 on one day, half the next.. and not take all of the hoses in a given area.

Pl make video of isc

Kakamiss 😭😤

Hello, is it written in the rules that we have to connect each fire hoses for the pressure test? or is it only to make it effective to be done one time, if its in the rule or circular could you share to me? Thankyou, appreciate the video

Pa shout out next video lods! Godbless!!

@ShowandtellShawntel

3 жыл бұрын

haha, cge kuya sunod. 😅

what about fresh water rinsing from inside??

Beauty with Brain

Subscribed already Maam!🙂👌

@ShowandtellShawntel

3 жыл бұрын

All the best

who will be the one po to change the gasket?

Thank you maam hope maam sa lifeboat na pod maam

@ShowandtellShawntel

3 жыл бұрын

Noted sir, I'll do that on my next vid.

hi i have one dought like after testing all fire hose do we have to rinse with fresh water and how to test fire line

@kevinantony7173

Жыл бұрын

Drain SW then rinse with fw then drain fw and finally dry it faster with air and secure

Grt job... I would like to sail with you..

Ma'am, hindi po ba standard iniistencil or mark sa hose yung rated pressure at date ng hydrostatic test?

Gud day po di po ba sya kelangan na picturan nyo while hydro test for evidence na nag test kau, just asking lng po ty.

@ShowandtellShawntel

3 жыл бұрын

Yes yes, dapat picturean para sa gagawin mong annual report, kelangan may documentation.

Mam why emergency fire pump is not located in engine room?

G2 Ocean? Charterer namin yan.

Have you did the pressure test of the hoses???

@ShowandtellShawntel

3 жыл бұрын

Yes sir. 😊

Hi maam, how about hydrostatic test of firehose po?

♥️♥️♥️♥️♥️♥️♥️♥️

@ShowandtellShawntel

3 жыл бұрын

Thank you for the support 👍👩‍✈️

Very good explanation thanks 3 rd off ! More woman at sea

maam ❤⚓

@ShowandtellShawntel

3 жыл бұрын

Thank you for the support 👍👩‍✈️

Every 6 months ba yung fire hose test maam?

@ShowandtellShawntel

3 жыл бұрын

Annual po yun acc to solas, pero baka may specific yung company ninyo po to do it more frequent. Check nyo nalang po sa QMS 😊

@pinuelajumar1805

3 жыл бұрын

@@ShowandtellShawntel Thanks po Maam😁

maam ano po agency nyo