Thank you so much! Replacement worked just as described here. Funny: OEM part from Viking $223(!), your link 23.99! Much appreciated!

@ScottTheFixItGuyChannel

7 ай бұрын

That is excellent 😊😊😊

This guy’s a total boss working a drill with a two toned rolex on lol

@ScottTheFixItGuyChannel

3 жыл бұрын

Thanks Andrew👍

Nice to see a you tube vid on this. We fix a hand full a year, & the quick test is pull the top off as shown, & before disconnecting or metering anything, just bridge across the 2 low volt pins of the Up/Down ribbon connector inside, with a small screwdriver etc. Usually the snorkel will then rise & the fan speeds can be confirmed working, & the up/down switch is confirmed bad. This also has the benefit of leaving the vent up w the fan working until a part arrives, if not on hand. Hope that helps.

@ScottTheFixItGuyChannel

2 жыл бұрын

Great info. Jonathan😊 thanks so much.

Thank you. We were told our whole unit needed to replaced. But the draft would work intermittently with power just needed several presses of the switch. But I figured it was something more simple. We tested the electricity and I ordered the switch on line from Viking parts. The problem was fixed in about 10 minutes!

@ScottTheFixItGuyChannel

3 жыл бұрын

Wow, that’s impressive👍

This video was dead-on. Thanks. Worked perfectly.

@ScottTheFixItGuyChannel

3 жыл бұрын

Thanks Vincent😊👍

This was exactly what I needed. Bought the part on eBay for $10. Fixed the problem!

@ScottTheFixItGuyChannel

Жыл бұрын

That is super impressive. Can you post a link to that eBay part when you get the chance?

Thank you, this worked perfectly and I am not a handy person. I’m so grateful.

@ScottTheFixItGuyChannel

3 жыл бұрын

Awesome, Thanks for the feed back👍

Thanks for helping us fix ours !!

@ScottTheFixItGuyChannel

5 жыл бұрын

So glad it worked😊

vERY NICE OVERVEIW and step by step, my exact model and problem so really helpful. Pace of video good and easy to follow. Thank you

@ScottTheFixItGuyChannel

3 жыл бұрын

Awesome, Thanks Kenneth😊👍

I'm waiting to close on a house that has a similar vent that came up in the inspection as not working. My guess is that it is exactly the same issue. Thank you for posting this!

@christopherjwarner8024

4 жыл бұрын

Me too!

I think I have this same issue. Can you provide a link to the replacement part?

Thanks for the video, can you please let me know where can i get the part ?

@bobbyarnold9797

5 жыл бұрын

800-328-4270 x-805 ask for Gary

I could use some clarification on one point. You say that you pull up the range hood to remove the 2 Philips head screws on each side of the vent, but don't show that step. How much force is needed to lift the vent to the raised position? I ask because mine doesn't move with a fair amount of force and I don't want to pull harder (and risk breaking it) unless I know that it is normal to require a fair amount of force to lift the unit. Thank.

@ScottTheFixItGuyChannel

Жыл бұрын

It is very heavy and not easy to lift .

@barrysperonello5822

Жыл бұрын

@@ScottTheFixItGuyChannel Ok, heavy lift it is. Thnx

Hi Scott...my up and down motor is working but the fan isn't blowing? any ideas what to look for?

@ScottTheFixItGuyChannel

Жыл бұрын

I wonder if it just needs a new fan switch?

So how did you get the vent in the halfway up position.? Mine won't budge.

@tommygun7702

3 жыл бұрын

Smack it might do the trick just kidding lol

Any suggestion on not going back down and not turning off?

@ScottTheFixItGuyChannel

3 жыл бұрын

I bet that switch used to turn off needs to be replaced.

@ronaldoalvarado5121

3 жыл бұрын

@@ScottTheFixItGuyChannel not sure. It’s at a house my company manages for rentals. For right now we just turned it off by switching brakers

So mine says clean filter , red light is blinking, I’ve cleaned them ,still blinking?

What is the part #?

Can you please provide a link to the replacement part used??

@ScottTheFixItGuyChannel

2 жыл бұрын

Here you are Greg: amzn.to/3QfGNZv

@gregz1235

2 жыл бұрын

@@ScottTheFixItGuyChannel thank you so much. It worked!!! The only issue is my "1" power speed doesn't appear to work. I wonder if it's the motherboard?

So how did you get it up

@ScottTheFixItGuyChannel

Жыл бұрын

Hi Greg, Did you ever get yours going? I pried this one up slightly with a flat head screwdriver and then lifted it up with both hands a locked some vice grips near the base while I switched out the switch.

@gregbgregb8487

Жыл бұрын

@@ScottTheFixItGuyChannel I believe so it was a while ago.