See this loco pulling Swift Sixteen wagons, which I also review: kzread.info/dash/bejne/nIh81MieoNuwpLw.html

Excellent complete tutorial. I didn't know Mamod got so reliable w many controls. Subscribed.

@Terrys-Steam-and-Cobi

8 ай бұрын

Thanks! 😊

After watching your video and learning lots, i have just steamed it up and it ran superbly, didn't know about some stuff until the video, but now happy days 😊

@Terrys-Steam-and-Cobi

4 ай бұрын

Awesome!! So glad to hear! I had to figure it out by trial and error. You should have seen the cylinder lock my first try and the sheer volume of steam oil shooting out the blast pipe everywhere.

Absolutely brilliant video i have learnt a good deal from it thanks for doing it

@Terrys-Steam-and-Cobi

4 ай бұрын

Oh thanks! 😊 I really appreciate you taking the time to say so. ☺️

Thanks for such an informative video. That steam oil cylinder tip was super helpful.

@Terrys-Steam-and-Cobi

Жыл бұрын

I’m glad. Mine made such a mess before I began experimenting.

A comprehensive tutorial that covered all the points that I've learned, mostly by trial and error, running my similar MSS. Great fun once you've got the knack of how to get the best out of these fun little locos. :)

@Terrys-Steam-and-Cobi

2 жыл бұрын

Yup. Great fun once they are run in and we have the hang of them.

That's a cool little loco! Man that thing really scoots too lol.

@Terrys-Steam-and-Cobi

Жыл бұрын

It does scoot. However, I had to run it fast so it could go up the 2% grade at the ends of the deck. In this video I had shimmed the elevated line so that the grade is now something like .5% and so the engine now does not need to be run so fast. kzread.info/dash/bejne/qKl5lKuhdMLFm7A.html

top tip for longer run: preheat the boiler water in a microwave or kettle .............

@Terrys-Steam-and-Cobi

8 ай бұрын

Now that’s something I definitely should have mentioned! I sometimes do that but often don’t because when I run an engine I run it quite a while and top up somewhat frequently so don’t bother preheating water. I definitely should have mentioned it though.

Another fine video Terry

@Terrys-Steam-and-Cobi

2 жыл бұрын

Thanks Don. I gave you my email. Did KZread block it? Where are you? In Canada?

Live the videos keep them up!

@Terrys-Steam-and-Cobi

2 жыл бұрын

Thanks!

Hello thanks for doing my request really appreciated I have bought my sl1 and I have decided not to buy a mk3 but still might get one in the future my sl1 runs ok but thanks for all the tips because my sl1 has the same burner and keeps getting clogged and I have a lubricator so all of this was really helpful thank you it’s a real help

@Terrys-Steam-and-Cobi

2 жыл бұрын

Not a problem. Very happy to be helpful.

@malvernroadrailway6955

2 жыл бұрын

I have decided to get a mk3 now I am trying to sell two items to get it but it’s not going so well Ill keep trying

@Terrys-Steam-and-Cobi

2 жыл бұрын

@@malvernroadrailway6955 patience pays off.

Thanks mate, that was really useful, i have had it running twice. I have done a video of it running too if yiu look through my videos a bit. My biggest issue withit is lighting it up but it was new from factory and came with some major issues. I fixed it last night and went to test fire but couldnt find a gas adapter also looks different to most other mark 3’s. Ill do another video so you can get a better look

@Terrys-Steam-and-Cobi

2 жыл бұрын

Hopping to your channel now…

Does these work on lgb track? Also hows the whistle on these? Thanks

@Terrys-Steam-and-Cobi

Жыл бұрын

This one does not have a whistle. I ordered this locomotive with wheels set to 32 mm gauge. You can order it set to 45 mm gauge. So yes, it can run on LGB track. But it is a bit fast and I would not run it on tight curves.

As a kid who works on the full size I highly don't recommend putting the feul in first Theres a story of a railway where they lit up without water in the boiler. If anyone in my crew first put a layer of coal before water there's sufficient water in the boiler, i will scold them. Hasn't happened before, so it will never happen.

@Terrys-Steam-and-Cobi

8 ай бұрын

Generally I agree. But this little loco runs on butane and butane needs time to settle in the tank before lighting. Otherwise it can be harder to light and can cause flashes of flame as it sputters, not to mention time for the gasses that escaped the tank when filling to dissipate.

@laaity

8 ай бұрын

@@Terrys-Steam-and-Cobi i suppose that's true But for me An engineman I go eek lol

@Terrys-Steam-and-Cobi

8 ай бұрын

@@laaity and I can completely understand why! Lol. I have loved and appreciated all the stories and things you have told me about running a real loco. You are a wealth of information Wihann.

@laaity

8 ай бұрын

@@Terrys-Steam-and-Cobi haha thanks Idk i feel like i can get carried away

@Terrys-Steam-and-Cobi

8 ай бұрын

@@laaity that’s ok!

Sure is a shame that some of these steamies have whistles and some don't. Like this engine in the video for example.

@Terrys-Steam-and-Cobi

Жыл бұрын

I guess it’s a trade off. In the plug where a whistle would go I have a one way water fill valve. I do like the whistles though.

@bethmotgomery2662

Жыл бұрын

Also they do make tenders for these engines. If I have one of these engines, I would love to install a whistle. Also to keep the fuel from going on empty, I am thinking of installing a fuel tank on the tender for gas burners, and for engines that use the tablets, I will use the tender to carry extra tablets on board. What do you think of these ideas?

@Terrys-Steam-and-Cobi

Жыл бұрын

@@bethmotgomery2662 I like these ideas. I have a tender for my Mk3 now and will be adding RC to drive the steam regulator.

@bethmotgomery2662

Жыл бұрын

Ok. So how does the rc function work?? Do they have tanks that can fit in the tender?? If so then I would use some piping and a valve to connect the tender tank to where the fuel goes on the engine so you can refuel easily. Also for water refills, I would build a completely functional little water tower that CAN be refillable.

@Terrys-Steam-and-Cobi

Жыл бұрын

@@bethmotgomery2662 a receiver and batteries for the RC system in the tender. Then find a way to mount or bracket a small servo in the loco cab with a rod to the steam regulator. I will do a video on this, but it won’t be for a while because we are in the middle of a move.