They've now included this video on the product page, not the direction I'd go to make my product look good but it's a strong move

@octane613

6 ай бұрын

They got the right spirit. Those fellas are strange, but above all they're hobbyists.

@jackx4311

6 ай бұрын

@@octane613 - *ANYONE* who builds a boiler with no safety valve has NOT got the right spirit, and I don't give a damn whether they're 'hobbyists' or professionals. Look for info on the injuries even an empty aerosol can will cause if you throw it on a fire.

@SuperAWaC

6 ай бұрын

the chinese definitely believe that "any publicity is good publicity" since they happily give out discount codes and free items to people who give them negative reviews, because ultimately they know that even a bad review will drive sales they otherwise wouldn't have gotten, since the people who watch this who think it's a bad product never would have bought it anyways, but people who would buy it regardless of the bad review may not have been exposed to it without the bad review. the chinese are the ultimate capitalists

@GodmanchesterGoblin

6 ай бұрын

Just an update... the video has now been removed from their site.

@Miner-dyne

6 ай бұрын

Indeed a bold move

I feel like someone made a semi-decent compressed air engine and they said, "Lets make it steam powered instead". And now we have this ... thing

@lmm

6 ай бұрын

I think you think more thinking went on there than it did 😂

@snowballil3133

6 ай бұрын

😂

@ogi22

6 ай бұрын

@@lmm ROTFL Anyways, I loved your review. It's nothing but honest and i really, really hope that someone who made this engine will work with it and smooth out those little things. It's just so strange to me, that this engine on one hand looks amazing, futuristic, it is well machined (so obviously someone who did it, had to have his way with tools in the workshop), yet there are so many small details, which an engineer would never screw up. Kind of like taking a Gucci tie and making a granny knot to finish it off... One thing hit me when i first saw that burner... My little experiment with trying to get a better flame from an alcohol burner. It was primary school and i kind of lost some eyebrows then🤣. Basic idea was: if alcohol fumes are burning, and when you heat up the pot, alcohol evaporates quicker, let's stack it up!!! And i made a small bottle cap burner on the bottom and another one hanged over it... It was fun.😋

@tipwilkin

6 ай бұрын

Yeah, it seems like it was designed by a competent engineer, just not one who knows much about steam engines

@edherdman9973

6 ай бұрын

@@lmm Indeed. I'm just sitting here idly, thinking "that is open...why did they just cut a hole in it when the piston moves open??"

I don't know why YT suggested this video for me, and I wouldn't have bought a steam engine model if it _did_ work. However this is by far one of the best reviews I've ever seen for any product. It's got everything - broken laws, engineering that is simultaneously brilliant and awful, legitimate danger for the operator, misunderstanding of physics. Even instructions on how to use a simple wrench!

@Cythil

3 ай бұрын

Cleary YT picked up you and me might find this interesting despite lack of interest in buying steam engines. Almost a bit scary. So while I am not in the market for a steam engine (even if I do find machines overall interesting) I do agree that this was a pretty good review.

@danwilson1040

2 ай бұрын

Brilliant

@FriendlyNeighborhoodNitpicker

2 ай бұрын

Hahaha same for me! I am not now, nor have I ever been, in the market for a small steam engine. Yet this was recommended, and I watched it from beginning to end, and enjoyed it so much I subscribed.

crazy! my grandad built model steam engines in his garage using copper and brass. this looked way more technical than what he did but he seemed to have ticked much more boxes than this company. what's crazy is he passed not too long ago and this gets recommended to me! oh ill also add the copper and brass was often donated to him from pubs that were refurbished, they would donate the metals from pumps or plates that wrapped around the bar. true genius was my grandad, rip, miss n love you loads.

@CONSCIOUSMINDED

5 ай бұрын

I don't believe in coincidences. Ur grandad sounds amazing btw RIP ❤

@asdf9890

3 ай бұрын

I love stories of awesome grandpas. I had one too!

@dannythorpe1425

3 ай бұрын

@@CONSCIOUSMINDED thank you, he truely was, taught me sooo much.

@dannythorpe1425

3 ай бұрын

@@asdf9890 thats cool we all need an awesome grandad/godparent/someone.

Those “guards” are designed to produce a nice grid pattern as you leave your skin on them😂

@MathijsWijers

6 ай бұрын

Perhaps they are conceived as some sort of vertical barbecue?😂

@counterfit5

6 ай бұрын

​@@MathijsWijersoh good, I've been looking for one of those to make shawarma at home

@KlodFather

6 ай бұрын

So you look like you rolled around on the BBQ like in JackAss LOL

@FtungusAmungus

6 ай бұрын

it's part of the company's branding. 🐄

@crazyedo9979

6 ай бұрын

Company trademark at steroids.😁

All the more reason I try to steer beginners towards makes like Mamod, Wilesco, and Jensen. They're safety-tested, fitted with proper safety valves and other "don't melt your face off and/or blow yourself up" features, and they're made with materials that you don't have to worry about letting go all of a sudden.

@lmm

6 ай бұрын

Big fan of Mamod and Wilesco, I have no experience of Jensen - what are they like?

@Shipwright1918

6 ай бұрын

Jensen's steam engines aren't too dissimilar to Wilesco's, made in the USA since 1932. Little less polish on the finish perhaps, but engineering wise they're quite well made. Have a #75, the biggest in their "Hobby Line", has a working Stephenson valve gear along with a regulator, whistle, safety valve etc. Only complaint I have is the paint on the boiler house burnt and flaked off, and the steam exhaust isn't routed to the chimney like on a Wilesco, but it's been a good little engine, was a bit cheaper than its Wilesco equivalent.

@ReggieArford

6 ай бұрын

@@lmm kzread.info/dash/bejne/fJp1mNGjkZqnk84.html&pp=gAQBiAQB

@jcgoogle1808

6 ай бұрын

I don't know which was more disappointing,.... the steam engine or the guy in the video whining about it or the comments whining about it. It has a safety valve here 17:40. The whole thing leaks like a sieve.

@TravisTerrell

5 ай бұрын

@@jcgoogle1808 Lol that's what I'm saying! It's got one, and it's permanently open!

Tested on your desktop, no hood, no safety goggles, reaching over the bomb. Good lad! Safety squint!

@nisonatic

3 ай бұрын

Yeah, the lack of the safety valve was a big red flag that the device was poorly designed. Adding a safety valve fixed one obvious flaw, but with a poor design there can be other hazards. He could have easily gotten a face full of scalding water.

@SteamboatWilley

3 ай бұрын

Even the instructions said to wear goggles. And having seen the engine run, we now know why.

@JamesKnoll

3 ай бұрын

I agree 💯 percent with you.

I remember building a watts dual piston steam engine from scrap, no kit all I had was 2 pages of design drawings. Took me nearly a year to finish, spent just about every night in my old mans machine workshop. Won first place when I entered it into the end of the year science project, not bad for a 12y old even the teachers were amazed. Great skills to learn as a kid, machining & metal fabrication became handy for me later in life.😁😁

@lmm

3 ай бұрын

I'm sure you did a much better job too!

I love how Lawrie has full knowledge of the fact that so many corners where cut it would be a circle. Yet he puts it indoors, in his house, next to him and at least 2 computers... XD

@GodmanchesterGoblin

6 ай бұрын

without heat resistant gloves or goggles...

@Blink_____

6 ай бұрын

really deflates a lot of his (legitimate) criticism. A poor choice. "Do as I say, not as I do".

@lmm

6 ай бұрын

Indoors means a better film. It also means I can see the flame better, as can you. The pcs are off. The water from the valve gear goes up, then back in the general area. You can clearly see the splash zone around the engine. I don't wear gloves or goggles when driving or firing full size locomotives, I'm not going to use them for a mini.

@akulkis

6 ай бұрын

China is all about cutting corners, not making things correctly.

@Ben31337l

6 ай бұрын

@@lmm But still, the instructions did recommend wearing goggles while you operate it... Also, I saw a potential problem, while yes you are going to need a safety valve, you're going to need to tune the valve to vent steam if it goes beyond the maximum pressure otherwise adding a safety valve would be entirely useless. Not once did I see the valve actually vent steam before the steam engine vented steam. It indicates that the safety valve was not tuned correctly and with that being the case, it's better off having the tapped screw in than having the valve at all.

As a little suggestion, the next time you are going to tap threads try holding the piece upside down so you don't get filings into the vessel.

@paulgreen7703

6 ай бұрын

Or fill the tap flutes with grease. Swarf gets trapped in grease and does not fall through hole.

@kelseydulaney3118

5 ай бұрын

Backing out the 3-4 through bolts and taking the top plate off would be ideal. Being safety vented at 15psi (appx 1bar) and loss on every other stroke I wouldn’t have worried about the pop off valve as a paintball gun, cylinder engine and other aluminum bored equipment like nail guns operate at 90-120psi. I’m sure there’s an engineering formula to prove the point of boiler volume at any level of fill couldn’t reach critical with flow volume at minimum, but I’m just going to leave it at sensible working pressure of like equipment being 8-10 times the pressure at much higher flow volumes work. Safety valve doesn’t hurt anything if installed, if not, I wouldn’t have bothered. But I’m American, we do things like that then pay our own medical bills to help us learn so our government doesn’t have to protect us from ourselves

@bustergonad3975

4 ай бұрын

Yes, I found it a bit disconcerting that the Tap used wasn't even cleaned from its previous use. Also looked out of square. But then what would I know. Only in my 50th year of trade experience as a Certified Toolmaker.

@markwright3161

3 ай бұрын

@@bustergonad3975 They were just matching the quality of the product

@JWazza

3 ай бұрын

You're worried about the swarf and here I am unable to get past how off square it is.

I’m amazed you ran this indoors, on a desk practically in your face! But props for the yellow car transporter on your desk, haven’t seen one of those in years. 👍

Aluminum is perfectly fine for a tiny boiler of that size! I’m guessing, it could operate at 400 to 600 psi with no issues at all. (Depending on the thickness of the aluminum and the type of aluminum used.) The safety valve sure, the boiler strength not a problem

@fritzhuber6806

4 ай бұрын

coffeemakers are also made of aluminium. That's not the problem. As stated, it's the missing valve......and a few other things that make this a piece to look at maybe, but never use it! Nevertheless, personally I think "design" should follow function and not just reflect weird ideas.

I love how the sales page has this very video embedded on it, so you go to the page to buy the engine, and there's a KZread video with the thumbnail reading "Dangerous and Illegal!" emblazoned across it 🤣

@gerbdnas

6 ай бұрын

Genius move in my opinion, this video probably sell more than you realize!

@thomgizziz

6 ай бұрын

Im not convinced that it is illegal... people like to use that word for clickbait a lot but some society not thinking something is designed well doesn't make it illegal.

@sarowie

6 ай бұрын

@@thomgizziz This is technically a steam pressure vessel. I assume that technically all steam pressure vessels need to be pressure tested and need to have a pressure release valve. Now, technically that is not a pressure vessel, because it only becomes one, when you connect something to the outlet. That something could be for e.g a straight piece of pipe. Still not a pressure vessel. The straight piece also happens to fit the engine, but this also not a pressure vessel. Only when bending the tube and connecting all three pieces it magically becomes are pressure vessel, missing the pressure release valve. Now as one commenter put it: It is a lovely little compressed air engine. Place a regulator in front of it and let in run slowly.

@treelineresearch3387

6 ай бұрын

@@thomgizziz Given the British nanny state tendency to ban and/or loicense everything, it probably is.

@leechowning2712

6 ай бұрын

@@thomgizziz steam engines have a lot of restrictions, even here in North America due to how dangerous a steam vessel can be. I am forwarding this to a US expert, but he did explain that in the UK it would be illegal without the safety featurese he added before using, and a quick search on code for my state lists a safety valve directly affixed to the boiler/reaction vessel is required by state law. Yes, this is a toy, but just as a toy working firearm is still legallly a firearm, this is a working steam engine subject to simple safety rules.

My grandfather built the house for his family. In the basement he had a boiler and the house had steam heat. I learned a lot about boilers from my grandfather and one of the things was the importance of a slight glass so you would know the level of the water in the boiler.

@SteamboatWilley

3 ай бұрын

Yeah, even Mamods have some means of seeing of the water level is correct. (A gauge glass on newer ones, on mine it's just a simple plug; when water starts coming out you know you have filled it enough).

Since you added the much needed safety valve, you could bypass their safety system. If you would plug the the hole to atmosphere on the control valve block you would use less steam and have possibly have better speed control. This will use less water and help insure you do not run out of water before fuel. Make a project: put the lower device on wood or longer screws so the steam line is level. Make the steam line shorter and solder in a tee. with the one tee leg aimed down solder on a drain valve. A good review and the possibility of saving an injury. I was a senior engineer at a stream plant, people do no realize the danger in a pressurized vessel.

@johnladuke6475

3 ай бұрын

I used to watch MythBusters. Every time, they would give anxious looks at the camera and talk about how much they hate working with pressure vessels. Then came the episode where they built a framework of model floor and roof to building code, and simulated a water heater with its P&T valve blocked. It launched through two floors and a roof, and kept going. Pressure vessels are scary.

@briannemec9214

3 ай бұрын

A rocket is a pressure vessel with a hole in it. A bullet is a pressure vessel with a hole in it. My aunt opened a pressure cooker too soon (made a hole in it), there was tomato sauce everywhere. I worked in a steam power plant , pressure is to be respected. When pressure testing a feedwater heater the heater is filled with water. Then air is used to raise the pressure. The pressure gauge was monitored at a distance with a scope, just in case. Love them MythBusters. @@johnladuke6475

That part about aluminium losing its corrosion resistant properties as you heat it up is also why metal plants love to show that work safety video of what happens if you expose hot aluminium to water... Basically, its "corrosion resistance" comes from it being so reactive that it almost instantly corrodes a protective layer of aluminium oxide for itself when exposed to oxygen. If you continually remove this layer or keep it from growing one however... It reacts really, REALLY quickly, with an earth-shattering "kaboom".

Someone definitely put a lot of thought and time into the design. It's to bad they stopped a couple steps short of a good model.

@ianbelletti6241

6 ай бұрын

It definitely needs fire control. Whoever designed this needs to learn from old oil lamp wick adjusters. With a wick adjuster you can raise or lower the wick and even put out the flame as needed.

@rockets4kids

6 ай бұрын

On the plus side, it is historically accurate!

@kcdsTM

6 ай бұрын

Unfortunately I think this is a case where "a lot" wasn't really close to "enough".

@matthiasmay1977

6 ай бұрын

The engine runs quite smooth even at very low pressure. But whoever designed it has no idea how a boiler should work. If they sell it without a boiler it would be very ok. But that boiler is a no go. Very bad design and outright dangerous.

@JA-qi1fb

6 ай бұрын

I have a beautiful WWII SOE steam generator for charging batteries for agents in France etc, batteries were often needed for spy radio sets. After a few calls inquiries I gave up on the possibility of seeking boiler certification.

China is pretty prolific with what could arguably be called 'cargo cult product development'. They see something, they think "hey, I could make and sell that", and that's all the thought process that goes into it. As long as it looks like the original idea, someone will buy it, because they have never experienced the original, only seen it. And so the cycle continues. Safety, material science, efficiency, and sometimes functionality outright, are lost along the wayside.

@lmm

6 ай бұрын

There's some great ideas in it. Just not from a steam engine perspective!

@tabriff3832

6 ай бұрын

‘Cargo cult product development’. Excellent work sir. Exactly explains the situation. Richard Feynman introduced the concept of ‘Cargo cult science’ in a famous speech, and of course ‘Cargo cults’ themselves developed during WWII. I’m jealous, of course, that you made the cognitive leap before me. You’re a smart cookie. Sadly, the effects are wide spread. 20 years in the electrical wholesale/retail trade, and I’ve watched the Chinese factor, wreak havoc in more ways than people would credit.

@nikolaideianov5092

3 ай бұрын

Steam engine with chinese characteristics I got the idea from comunism with chinese charactaristics

While bare aluminium has corrosion issues at higher temperatures, anodized aluminium, depending on the kind of anodization of course, can have good characteristics. This being said, if they neglected to put in a pressure relief valve, i have my doubts they were thinking that when they were anodizing the thing yellow.

Nice review. I have a Mammod Steam Roller still in the garage I have had for probably 45 years

Wow. That definitely seems "designed" rather than "engineered", and it's a showpiece of what one can do with laser-cut metal and a nice catalog of generic parts. There are some fascinating details like the fact that the screw holes in the block of metal visible on top of the boiler at 5:34 have slots to the perimeter, which I think are there to make it possible to cut them with a waterjet while cutting the outside. It is almost as completely removed from traditional machining as it is from any engineering calculations or judgement. I would be entirely surprised if the throttle blowby that Lawrie talks about is intended as a safety mechanism; that seems far more thought than was put into any of the rest of it. My guess is that, instead, the "made from off-the-shelf generic bits" throttle that they cobbled together is simply leaky. Also, it seems to me that this is less likely to explode than to have the bottom sheet on the boiler flex enough to leak around the perimeter and blow out its entire contents in a shrieking banshee blast of flash-boiled steam. This is not clearly an improvement.

@guerrillaradio9953

5 ай бұрын

True. Instead of something that will outright kill you, it will only make you wish it had.

@kaasmeester5903

4 ай бұрын

In short: "looks good but will try and kill you" 😅

To help reduce the steam turning back to water in the pipes, insulate them with asbestos... I mean, it's no more dangerous the the stean engin itself! 😄

@kabob0077

6 ай бұрын

It's not like the cancer was will get you before the engine does...

@user-rr4rs3nt7y

6 ай бұрын

@@kabob0077 You'd get thrid degree burns followed by Asbetosis... Acualy, when I was a kid my Dad repaired the burner on one on my engins by filling it with asbestos fiber. But that was in the 60s.

@johnpearcey

6 ай бұрын

Of course, you do need to actually breath in the asbestos for it to be dangerous, so makes sure to saw it roughly with a power tool, or break it up a bit.

@KlodFather

6 ай бұрын

@@johnpearcey - The Vitamix blender makes good powder out of it...

@haroldpearson6025

6 ай бұрын

There is non asbestos lagging available from the model engineering shops such as Polly and Reeves.

What an absolutely spiffing review!!! So bloody amusing and quite frankly, terrifying too!!! Thank you so much.

Get some egg shells and soak them in strong vinegar. When the shells disintegrate, strain the liquid through a cloth. Add denatured alcohol to the liquid and scoop out the gel that it makes. You now have dry alcohol fuel that stores forever in a sealed jar. It can be regulated on flame/temp a lot better.

When I first started collecting (and restoring) vintage steam engines I found this out the hard way. The vintage Bing plant I purchased did indeed have a pressure release valve but it was corroded to the point of being locked up, fortunately I ran it on air pressure first but did not monitor the pressure on my compressor and blew the boiler cap off the top of the boiler, It would have been bad if I had been steaming it at the same PSI. Now, even if the pressure release is working, I hydro test the boilers first. Thanks for posting.

@thomgizziz

6 ай бұрын

Why would it have been bad? You would have just blown the boiler cap off the top of the boiler with steam pressure... people are not smart and say and think really dumb things to fit in and to get attention.

@hastyone9048

6 ай бұрын

@@thomgizziz …. You are clearly the protagonist of your little “seeking attention” example. Blowing the boiler cap off a boiler while steaming could potentially cause extremely bad burns. I’m going out on a limb here when I say you should probably stay away from ANYTHING that involves fire.

@regd809

6 ай бұрын

@@thomgizziz The thermal and latent heat in steam means it has a lot more energy than compressed air. You get a much bigger bang and now there is hot shrapnel coming for you.

@peterduxbury927

6 ай бұрын

Not forgetting that (if you blow the Boiler Cap off with steam pressure), the temperature of the steam when it meets atmospheric pressure is several degrees above the Boiling Point. A real danger when compared to running your steam engine on compressed air...... You will always find the 'knockers' who will challenge you on this point, and it is not worth writing back to them. Let them all find out the hard way.

@rrai1999

6 ай бұрын

@@thomgizziz What a silly comment

“Prevent Danger” is brilliant from a legal perspective. If anyone gets hurt, and litigates the company, all the company has to do is prove the person didn’t prevent danger ⚠️ which is impossible 😅🎉😢

@kylemichaels3373

6 ай бұрын

Not in the U.S. anybody can sue anybody for anything anytime regardless of disclaimers. Also it's made in china, you can't sue them.

@rickcollins2814

5 ай бұрын

I put that in the same bin as instructions that tell you to do some step, "carefully". I'm never quite sure if that should be a smidgen of "careful", or a bucket of "careful". I also wonder if left-handed "careful" is as good as right-handed "careful".

@crinolynneendymion8755

3 ай бұрын

"Prevent danger" is (obviously) a translation for a phrase which probably makes succinct appropriate sense in the origin language. Hence the use of the word "reactor". Professional translation and proofing, a corner that's often cut.

You don't have to bend the pipe. Set the furnace on a block to raise it to the level of the reactor if the pipe is intended to be straight. Otherwise gravity should allow condensation to form within and dribble out one end under the influence of gravity. Also bending metal pipe can constrict it's volume at the bend... as exemplified by exactly what we saw happen. And I think the squeek upon use relates to the fact that it is annodized so the surface will abrade irregularly with releated contact with another annodized aluminum surface upon heating and subsequent cooling circumstances.

A couple things to fix this: 1. Use correct materials (not aluminum) 2. Cut down wicks so they don’t over burn like this 3. Make the chimney actually attach 4. Tighten the tolerance of the regulator/throttle 5. Add a built in safety valve 6. Fix the plumbing of the tubes.

@lmm

5 ай бұрын

7 change the valve gear to something that doesn't just eject boiler steam.

Ohhh yeah. As soon as I saw the color of the metal I knew what was up. In eBay Seller Engrish, that's "brass tone" -- it's aluminum anodized to sorta-kinda-if-you're-drunk-and-squinty-enough look like brass, but it very much is NOT brass, it's what brass looks like if you've never actually seen it and only heard it described over a telephone with an unusually buzzy connection. The similar, but slightly different "bronze tone" is their fake copper look, and it's just as egregious. Not to mention it's gushing out wet steam and... that is NOT a safety mechanism by any means, that is a time delay on your improvised shrapnel generator if you run that thing dry by accident. The cherry on the whipped cream on the whole poo fudge sundae being that it's bloody incontinent, which means that not only are all the screw threads _cast_ instead of cut, they're cast _badly_ ... a brilliant piece of kit, but only if you're a fool, a madman, or a hitman whose target takes after Rube Goldberg just a little _too_ well. I'm by no means a steam engineer, and my mechanical engineering skills are, in general, dubious at best. But, as my grandmother would say -- even Stevie Wonder could see just how awful this is. Whatever isn't useful as scrap bits for making something far better (not a challenge by any means) is purest bin fill, nothing more or less.

@lmm

6 ай бұрын

Your review is far better than mine. I enjoyed that

@laserhawk64

6 ай бұрын

@@lmm Oh dear Lord in Heaven. Easy on the praise, there, I say, chap! Wouldn't want it to go all to my head -- I might explode, a bit like that boiler's liable to if you don't watch it like a meth'd-up hawk... Seriously, though, thank you :3 I am but a humble tinkerer, and I do not feel worthy, but I shan't argue...

With how poor the safety systems are on this model, I feel like they took an compressed air engine and jerry rigged a "boiler" to make it a steam engine. The only thing that boiler is useful for is demontrating a boiler explosion.

@catfish552

6 ай бұрын

That would also explain the laughably shitty chimney.

@lmm

6 ай бұрын

It would be better to run it on compressed air!

@SilvaDreams

6 ай бұрын

Just from the wording it's some Chinese junk

@gorillaau

6 ай бұрын

​@@lmm One doesn't exclude the other option. Let me run away before someone tries. Do not attempt this at home, or at work.

@MyfriendthinkheOJ

6 ай бұрын

No such thing. Water can’t hurt metal

Oh, forgot to mention. FIX THE PRORBLEMS> Every single deficiency you showed me could be mitigated with some more tapping and insertion of screws and/or drilling and tapping. There's no interest in another train like you showed as an alternative. That little engine is DOPE and as it is designed, it can be improved greatly. Even the Jenky screw just needs a larger screw in it. Dress it up and use a titanium screw or something awesome. Fix it. You already put a regulator on it so keep going. Consider slower burning wicks and possibly water your fuel down a bit/use other slower burning fuel. REINVENT THE WHEEL! You certainly have knowledge.

Any reasonably thinking (read non-twit) would view this engine as something to engineer. I and my friends have had this trait since about the age of six. We would cap the wick openings and go to one TRIMMED wick. We'd never light a dry wick. We'd try different fuels. We'd mount that stack deeper or change it. We'd design a safety valve. We'd improve the throttle. We'd feed the excess water to a feed tank with a valve. The UK has nanny stated the people so much they have lost the ability to dream, dare and innovate.

Whoever designed that needs to be served a cease and desist order. That is just downright dangerous. For God's sake, take that thing outside before it burns down your house.

@lmm

6 ай бұрын

It's very poor.

@lakesiderailwayco2484

6 ай бұрын

@@lmmwhat? Poorly made???

@ronmckickass5714

6 ай бұрын

Not nearly as bad as that guy who flogged the hole with that tap.

@theonlybuzz1969

6 ай бұрын

Good luck with that one, it’s from China, where dangerous stuff happens and is just normal in their country…

@rre9121

6 ай бұрын

Do you actually believe any complaining will cause the Chinese people that made that any trouble at all? They wouldn't care if it explodes and kills someone, they've already got your money.

you also don't want aluminum and steel together due to the galvanic reaction. This looks like a classic case of no one has died so far lets sell it.

@lmm

6 ай бұрын

Oh yeah...didn't mention that. So many issues, so little time

@atomicskull6405

6 ай бұрын

Unrelated to steam engines but a lot of RC helicopters (large dangerous ones not toys) use aluminum parts and steel screws to hold in all together. Now it seems to me using steel bolts to hold the blades in a 1.5m span rotor spinning at 2200rpm in the aluminum blade grips (not to mention the stainless steel bearings seated in the grips) would be a recipe for disaster, yet it seems all of them do this. What would be a better materiel for the bolts and bearings that woulds also be strong enough to hold up to that much force though?

@lmm

6 ай бұрын

@@atomicskull6405 I have no idea. But the big rc helicopters scare me!

Hi, thanks for your demo. I agree it looks good, but it stops there. I have always wondered why all or most steam engines send the steam down to the cylinders? Heat rises, so it would make sense to put the cylinders above the boiler. As this would reduce water building up inside! Yes, this would be the opposite to how steam engines are made. If someone could apply my suggestion, they could be on to a winner. Thanks again. 🇬🇧👍

They did an excellent job making that desktop steam engine terrifying in every possible way. And I'm amazed that you identified all of this and still chose to run it in your office, without protection, and oriented in a way that meant you'd have to reach around a tower of flames to adjust the governor.

@lmm

3 ай бұрын

This doesn't have a govener

I love the fact that this video is now on their website, apparently to promote the product. Jeez... Edit: Now removed from their website... Edit the second: Now put back with added comments about possible illegality in the UK.

"The collector" may want high end steam engines, like the Wilesco D32 (droooolll), but I can see the appeal of the Jank-master 9000 and similar engines. I just wouldn't run it on steam. Perhaps compressed air from a pre-regulated source.

@lmm

6 ай бұрын

Air would be much safer

The importance of a safety valve was made to me during a science experiment where I tried to recreate the Aeolipile using a flask with two right angle exit pipes on the sides. It spun around as I heated the flask with steam coming out the exit pipes but the pressure was still building in the device until it exploded! Luckily no injuries but It wasn't worth the paperwork afterwards!

Many thanks for this review - What is your recommended model steam engine instead?

So, with flames running up the side of the boiler, I guess the entire boiler barrel is now technically the crownsheet? 😬 I believe the Mamod safety valve opens at around 20psi, but a safety valve won't do you any good if the boiler itself isn't good for 20psi. I think you've got yourself a decent compressed air engine, and a bit of aluminum scrap.

@lmm

6 ай бұрын

The engine isn't even decent as its letting half the air / steam go to atmosphere workout doing any work! I don't want to try and work out where a crown might be on this. Mamods are 10 or 15 I think. This is 20 The instructions say the engine runs at 15 so I figured a fair guess.

@KlodFather

6 ай бұрын

If you want to test the pressure vessel, then pressurize it with air using a regulator and check where it goes boom at room temp and getting it really hot with a heat gun. That would work effectively but is one time destructive testing. If I have bolts in my neck and frankenstein stitches in my head, then you know why LOL

@scottwillis5434

6 ай бұрын

A better way to pressure test a boiler is hydrotesting: fill it with water (or other non-compressible, non-toxic, non-flammable fluid) and apply pressure to that. If it lets go, as soon as it does the pressure goes away and the pieces of boiler stop accelerating -- vs. the continued push and explosion you get with steam or compressed gases.

The flames licking up the side of the boiler alone make this a ridiculous and dangerous piece of kit in my opinion! Never mind all the other safety deficits!😮

@peterthebricky

6 ай бұрын

I thought just reduce the amount of wick sticking out of the burner

@Aaron-zu3xn

6 ай бұрын

did he not say it uses ethanol(90%)? that means clear flames so you think it's safe so it's even more dangerous

@2760ade

6 ай бұрын

@@Aaron-zu3xn Hadn't thought of that! You are right, Ethanol flame is virtually invisible in daylight!😮

@lmm

6 ай бұрын

It's pretty poor. As mentioned making the wicks shorter caused it to spill meth onto the burner which then dripped down the side on fire. Meth burns with a faint blue flame. One of the reasons for being inside as the flame is raiser to see!

They sent these to the schools here in kitsap county a couple years ago. I know nothing about steem engines however just now seeing this video and knowing Schools in the US have been uning them almost unmodified as far as i know (here in kitsap they dont use the burner it comes with they use a lab bunson burner) i think it is interesting to note the "not presure valve screw on top that needed replacing to the best of my knowledge has not been replaced.

This thing is simultaneously over-engineered and under-engineered.

A boiler without a safety valve on it is not a boiler; it's a steam-powered bomb, this thing is just straight up a bomb as it comes from the manufacturer.

@lmm

6 ай бұрын

This is correct

@JChristiansenLuckythebrony2222

6 ай бұрын

Honestly to anyone at home thinking of getting this: just buy a Mamod.

Many pressure cookers are aluminium. However aluminium in contact with a brass safety valve will corrode horribly. You should fit a stainless piece between the valve and the boiler. Or just polish it and put it on the shelf where it belongs.

@mikebrown3772

6 ай бұрын

Moka pots are cast aluminium with brass safety valves (opening at, I think, about 30 or 40 psi) and probably get far more use than any model engine.

@donaldasayers

6 ай бұрын

@@mikebrown3772 Moka pots are hardly known for not corroding though.

@orppranator5230

6 ай бұрын

A pressure cooker only gets one atmosphere more than ambient pressure, its not very high. Plus, I wouldn't be surprised if they have an aluminum shell, like the body of a car, while the inside container that actually holds the pressure is steel + the lid, like the chassis of said car. That's how the old pressure cooker that my mom had was built, if I'm right.

@donaldasayers

6 ай бұрын

Our pressure cooker is aluminium throughout. I am not qualified to answer the question as to what constitutes a boiler that does/does not require a boiler certificate, as the regulations have changed since I last looked. Suffice to say a pressure cooker and a moka pot both require a safety valve, which this does not have. It's illegal.

@lmm

6 ай бұрын

I don't know, I just know that aluminium is not a material that is accepted for boiler building.

A friend and I built a very simple steam engine from scratch. Literally the first part we ordered was the safety valve. Everything else we machined, silver soldered, etc ourselves but that one part was commercial and reliable. We further tested it with an air compressor repeatedly.

@BlacksmithTWD

6 ай бұрын

I'd recommend to test the boiler with water pressure instead next time.

@TheStefanskoglund1

6 ай бұрын

pressure test it using hot water (fill it completely so that there is no air left inside) and try raising pressure with a pump - not more heat. If the boiler fails in this situation the pressure will drop really fast.

@BlacksmithTWD

6 ай бұрын

@@TheStefanskoglund1 I'd still recommend cold water rather than hot water.

@jcgoogle1808

6 ай бұрын

They pressure test pipe with water. Using air is almost as dangerous and steam. I don't know which was more disappointing,.... the steam engine or the guy in the video whining about it or the comments whining about it. It has a safety valve here 17:40. The whole thing leaks like a sieve.

@Dreddy72

5 ай бұрын

@@jcgoogle1808 as the video does kinda reference, that's a fail of a safety valve. it only protects the engine, not the boiler. it works when everything is functioning properly, but what if something pinches off the pipe supplying the steam to the engine? now the boiler is just going to keep building pressure until it creates a new blowoff.

Certainly not something I would normally watch. In any case, interesting...Thanks for your time. cheers from OZ

"I can see why you need goggles", says goggle-less Lawrie! You know no fear my friend 😂

@lmm

6 ай бұрын

I don't normally bother with them for minis.

@LeePorte

6 ай бұрын

Safety squints engaged

@lmm

6 ай бұрын

@@LeePorte that's the one!

loving the way they proudly put this video on their website featured right in the description!!!

@lmm

6 ай бұрын

Video was reviewed by them first too!

@SquishyZoran

6 ай бұрын

I was just going to mention that.

Bending a small ID metal tube is fairly easy to do without kinking if you fill it with fine sand first. The typical method employs a long soft spring however these are usually unavailable. Sand works fine.

Excellent video. Well presented and very informative. Thanks

@lmm

5 ай бұрын

You're most welcome

"I'm dubious about this machine" Proceeds to test it 2 foot from himself in the house.

@lmm

6 ай бұрын

I put a safety valve in it, so we're talking 20psi top wack. It was brand new at that point, and an explosion was unlikely. I was expecting more leaks though!

@epiles2

6 ай бұрын

@@lmm but the fuel leaking off the slab onto the table/ground? seems not ideal

4:28 - My new screen saver 😂 But, my good gods above me - that engine is ALL of the dangerous!!😮😮 I trust you had an escape route and a fire extinguisher to hand old chap? I mean, that 'reactor'... Sheesh...!!

I bought one of these, it came with a pressure release valve, which doubles as a water filler port. I’m 55yo, it isn’t that difficult to use something younger people seem to be lacking . . . . Commonsense. The steam is regulated by a needle valve. With a little knowledge, one knows the flywheel position is important BEFORE starting. As for the different heights, a piece of timber to raise it. I’ll give you the aluminium as an issue. It should be a steel or brass boiler. Maybe it ‘keeps running’ to use the steam and prevent an explosion. Add in the aforementioned pressure valve (a which again mine came with one) it is fine. As for ‘stopping’ the engine, maybe remove the fire? No fire, no heat, no steam, solved! Safety is important, but everything has danger. Mitigating the risks, is the key.

@lmm

5 ай бұрын

I wonder if they've updated the design since the video.

That was a lot of fun to watch. I agree it is dangerous and I will be satisfied to have watched you play with it instead of me having to do it. :-)

1) It could be set up/mounted on a step, so that the engine steam intake is level with the boiler output, reducing the risk of priming. 2) The Burner could have the outer wick-holes blanked off, thus relying on the single centre wick. Slower to heat up but much safer. Also, a more densely woven wick would help. 3) A good model engineer could install a sight-glass on the side of the boiler for water level. 4) The slide valve could probably be adjusted or remade to fully cover the port. 5) A cheese-head screw, suitably fettled, could replace the Regulator bolt, thus taking out that backlash. 6) The steam-port piston could probably be re-engineered a la Mamod style. Thread the chimney hole for a more permanent, stable solution. Overall, despite the dodgy, it has the capability of being a good model. But NOT at that price.

I wonder if it would be worth trying to upgrade it, replacing the wick burner with a coal/wood burner, adding a sight glass, better funnel, just trying to make it better

@lmm

6 ай бұрын

You would still have to boiler built from the wrong material, and a very inefficient engine that wastes boiler pressure.

@timogross8191

6 ай бұрын

Why would anyone try to upgrade this? For a model too sloppy made (too far from the real thing) For a toy too dangerous. Something you buy to make a video review, wind yourself up about the missing safety and then put it to the metal recycler (or land fill?) Average people will fail to appreciate the difference between this monstrosity and a "home built" model. kzread.info/dash/bejne/loqAtbqYh6azeZM.html

The Federation of Model Engineers Societies (FMES) has got to be the most British thing EVER! It sounds like The Worshipful and Ancient Order of Bowler hats and cricket bats. You don't want to be trying to smuggle in unregulated miniature pressure vessels and steam boilers into the UK or you'll have the FMES on you case before you can say "Oh Crikey!"

I'm going to hazard a guess and say that there is some legal work around that involves the person purchasing having some involvement in the construction. You bending and connecting the tube, satisfies some legal definition.

Besides this really concerning “toy” I am almost concerned with Lawrie’s taste of wallpaper. 😂

@lmm

6 ай бұрын

Not my choice, I assure you of that

@simonmasters3295

5 ай бұрын

He has a point

"A company sent me this product. It's illegal, potentially massively harmful, and performs terribly even after significant modification... So the link is in the description, go check them out!" ngl Lawrie I'm not convinced 😂 (I'm paraphrasing for humour, I know he didn't really say this)

@lmm

6 ай бұрын

Best part, they approved the video for release!

@brettbuck7362

3 ай бұрын

I get it's a bad design, but how it is possibly "illegal"?

To improve this motor start with the mounting board. Put blocks under the motor so the boiler and engine are in line. Use a short straight version of the steam pipe. Next, tap the exhaust port, get a piece of steel tubing, and put threads on the end of the pipe so you can thread it into the block. As to the boiler maybe it is plated with nickel or some other metal to make it more corrosion resistant. It is also possible that it was anodized. With the added pressure valve it might be an ok little motor.

I still have my Wilesco engine from my childhood. 50 years old. THIS engine is just frightening!!

Thank you for sharing this It's something that a complete novice like me wouldn't consider, nor be aware of legal requirements. It looks amazing but is an accident waiting to happen. Glad we also have the video's you've put out on safe steam models

@lmm

6 ай бұрын

You're welcome. It could pose quite a risk. There's much better things out there!

@Jauertussen1

3 ай бұрын

@@lmm Are there not a product certificate required for this type of toys? and to legally sell it?

Uhm......Thats the issue with ordering from overseas, when you purchase effectively factory direct local regulations dont really apply. Yes, licensed businesses in a country/county/city are obligated to abide by the local regulations and laws. An entity across the internet can sell literally anything that wont cause an international incident. And there is ABSOLUTELY NO POSSIBLE AVENUE for local laws to be enforced in a foreign country....that is kind of the entire point of sovereignty. They (the brokers attached to the chinese factory districts) are under no obligation to be truthful, not to mention act in your best interest in any way, they are obligated to make sales. You, us, anyone, as the buyer have to be knowledgeable enough in the products we purchase to spot BS listing ratings and blatant garbage construction. Never, EVER, trust an unknown seller, assume its a polished turd until proven otherwise. Never, EVER, assume its a bargain from a minimalist manufacturer being your pal in not charging you for the big name label. Most of these products are runs to keep the factory going and run out left over plastic, casings, components. The big names pay for the best QA, the cheap sites like alibaba and wish (and amazon) are mostly factory district brokers using scripts to manage listings on multiple seller accounts with only enough QA to confirm it wont let the smoke out....probably. If you buy a product, assume its built to be safe, and blow your hand off.....thats on you. At worst theyll just close that account and move the listings over to another one. Think like a broker that doesnt give a shit about anything except making a sale. Thats what 90% of these seller accounts are. And no, they dont care. There is literally no punishment they have to worry about. Hell, Amazon has no simple method at all for users to flag false listings and dangerous products. Why? because they know these brokers will just have their bots go and flag competitors, like how they give all their other seller accounts positive feedback to boost their listings. No oversight means this capitalist practice of screw the customer runs rampant. Funny how a communist country is capitalizing harder than the capitalists...almost like that subtle narrative that creeps around The Mans™ big bad broadcasting companies transmissions isnt being entirely truthful...possibly even priming people to remain divided so they cant come together as a cohesive group against their interests (ie, investments).....Nah! Thats crazy talk......right?

I'm not sure if anyone else has mentioned this, but I feel it's important to point out. Burning ethanol with steel mesh for heating, in not exactly the right way, produces a lot of carbon monoxide, the outer fins on that boiler aren't exactly mesh, but flames licking up the side of sharp steel cuts like that is also likely to cause carbon monoxide. I would make sure you have a CO detector in the room if you're running that again just to see if I'm right about that.

Thanks for stressing the safety valve, that thing is an unintended pipe bomb. Not to mention a huge fire hazard. Looks cool, but I don’t like being scalded, burned, or perforated by shrapnel! This was recommended after I researched locomotives last night, glad I found you!

The most worrying thing about this engine is that some comments on the website are like "Ideal Gift for kids". I hope that it is just some bot, or the Chinese manufacturer trying to increase his sales. But that the thing these days, and it isn't limited to China, happens also in Europe and USA: many people don't even recognize that they are making crappy designs!

@bentullett6068

6 ай бұрын

They seem to think that if the computer models work that it will work in real life. Sadly a lot of these new model engines are designed and built in China where they don't adhere to the same quality standards to as you said obtain cheap sales. As I have mentioned in my comment is same quality standards also being seen in other items like computer tech, power tools and even models being built by highly regarded model manufacturers.

@lmm

6 ай бұрын

This would be terrible for kids. It's... Actually just pretty terrible

@epiles2

6 ай бұрын

The first thing in the product description is this video lol, they arent doing themselves any favors.

@martinconnelly1473

6 ай бұрын

The Pressure Equipment Directive (PED) is restricted to pressure vessels with a capacity over something like 1 litre. If it is smaller the PED does not apply and so it is possible to claim it does not apply to something small like this boiler. I don't know if the boiler regulations would apply to something as small as this but there are standards for miniature steam locomotive boilers so they may be applicable. I think the starting pressure of 15 bar (about 220psi) is confusing atmospheric pressure which is about 1 bar with 15psi which is also about atmospheric pressure.

There isn't such a thing as a boiler without a safety valve, that's just a bomb.

@lmm

6 ай бұрын

Not far from it

I reckon cap off most of the burner ports. Add 2 double ended wicks with a thick end and a thin end, put the thick ends into the fuel tank opposite each other. More fuel in the tank. Less water in the boiler. Add a reservoir tank to the side with a catch point where you can fill water without having steam come out, and an exit valve to allow more water into the boiler to top up when needed.

The instructions refer to it as a Watt engine. Watts engines were condensing engines in which the power stroke came from atmospheric pressure so I assumed this was the reason for no safety valve. It would also have been fascinating to see the mechanism that would have enabled the condensing cycle. However it is nothing of the sort just a very primitive high pressure engine. So as well as being a miniature bomb you could have them under trades description.

A victory of styling and a novel concept over Form and Function. It is also a bit suspicious that they seem to go to some effort to not describe the pressure vessel as a "boiler," presumably on the rather dodgy grounds that in correct operation it shouldn't be able to sustain pressure. I wonder if the lack of gaskets is also intended to be a safety feature along the same lines.

@sarowie

6 ай бұрын

I am pretty certain that the pipe is straight so that it is not an pressure vessel. The boiler without restriction would just boil water to steam at atmospheric pressure. Only by intervention of the buyer it builds pressure.

Scary. Where is the water level gauge? Why no pressure gauge on the boiler? Too much of a risk but if I was going to put it together I would stand the engine on a block so that the steam pipe was straight.

@lmm

6 ай бұрын

No water gauge, but that doesn't fuss me, my older Mamods were just filler plug level

I thought it was going to explode for a second there. Cool video and very informative. It's my first one so far. Thanks for the info.

@lmm

4 ай бұрын

I didn't think anything bad would happen the first time it steamed 😂

It has excellent reviews And says Please note that this Engine Model needs to be used outdoors! This product may not comply with the relevant UK regulations, please order with caution for UK customers! Thanks for the video

They should s-can the explosion generator and sell it with a fish-tank bubble pump since it will run on such low pressure...clearly marked *"NOT FOR USE WITH STEAM"*

Cheap Chinese toot isn't even cheap anymore. Interesting looking at their marine and mill steam engines that bear uncanny resemblances to Stuart Turner engines, even down to the fine details in the castings.

@lmm

6 ай бұрын

Oh really??

@JSmith19858

6 ай бұрын

@@lmm Yep. The Mill Engine is a Stuart S50, it has the same detail on the steam chest cover, and the Marine engines are based on the Twin Launch. There is another that looks a lot like a scaled down No1, and others with details that ape the 4A.

The Mamod safety valve you used as an example is leaking from the thread seal and is not blowing off

At 7:40, in addition to the lowered corrosion resistance, as well as Aluminum being much softer and prone to pressure BOOMing than steel, which ALSO gets worse as temperature increases, we have... A nice STEEL plate bolted to the bottom of the Boiler, to FURTHER INCREASE CORROSION due to Galvanic Reactions.

Well I certainly would NOT have tested that indoors! It looks more dangerous than my 1970s primus stove, and I had one of those go bang some years ago, outside fortunately, damn lucky I wasn't hit by shrapnel.

@BillDavies-ej6ye

6 ай бұрын

Yes, I felt a little anxious as the pressure built up. Plus a meths burner licking excessively large flames everywhere. It looks like three bars secured by friction fit, outboard of the boiler, are all that resists pressure. Guessing 2 inch bore, that's nearly 50 lb force at 15 psi. Not even tiny screw threads holding it together? Can you turn the burner off, or snuff it out?

@KlodFather

6 ай бұрын

@@BillDavies-ej6ye - A water spray bottle is effective, but I would not have run this inside. The only way to be more dangerous is to run alcohol as the fuel and as the liquid in the boiler so the steam engine blows flames when running 😱😱💣💣💩💩 😎👍

I have absolutely no experience with steam engines of any sort or boilers. But I do have experience with many different forms of HPA or nitrogen. This honestly sketches me out quite a bit. I've seen pressure vessel failures. I really really don't want to be in the same vicinity as them when they fail. I was quite close to a failed regulator. If I was a few feet in the other direction I probably would have died. It required tools to get it out of the tree. The pressure vessel rupture I witnessed I was quite far away from and I honestly was worried about shrapnel. There is absolutely no way you can convince me to go near any sort of pressure vessel without any safety mechanisms. This is honestly quite alarming but not surprising at all. Considering all of the rather dangerous stuff I've ordered off the internet. This just is on the very high end of the danger scale. Also I would recommend a CO2 fire extinguisher if you don't have one. Even a very small one would be fine. CO2 is far less likely to have any of the itching compounds and doesn't really make a mess. So people are far more willing to use it before a situation gets two out of control. I would also probably have a dry powder extinguisher in case the fuel fire gets a bit out of hand. If you're going to be screwing around with things like that it's better to have all your safety bases covered. Just a friendly safety suggestion for anyone messing around with this sort of thing especially inside of a structure.

It is a great video, in my opinion! One of the problems depicted here, I think, is the length of the wicks, they are waaay too long! They must be pushed back or trimmed in such a manner that the flames barely touch the pate with the tips. If will reduce the consumption of fuel, make the temperatures and the RPMs more manageable, and make the machine safer to operate overall. The other problem, as well mentioned by the TS, is the overall machining quality of the parts involved. There are too many leaks to call this a good quality product.

What you need is the ability to set the valve timing. Put in a slide in valve along with a Stephenson link. You need a sight glass on the boiler.

At least for pipe bending - get a brake pipe bending tool. But that's probably the smallest issue. I'd prefer to use a brake hose instead of a rigid pipe. I'd prefer to have the pressure gauge on the boiler. And in addition to the safety valve also have a blasting tin that goes into a hose that should go into a water filled bucket to take care of dangerous steam release. So the main issue is the boiler as I see it. So just run the engine on compressed air and it would be a lot nicer and less dangerous unless you overrev it or do some other stupid things.

@lmm

6 ай бұрын

Compressed air would be the safer way to run it. Though it's still not a good engine

@ehsnils

6 ай бұрын

@@lmm I agree that it's not a good engine, but it's reminding quite a bit of the earliest steam engines made and those weren't good either. They did work about as well as this engine, and If I'm right they actually had the power stroke from the condensation of the steam, not the injection of the steam.

@ajayray4408

6 ай бұрын

I can see someone kinking the tube, either in initial assembly or when setting it up later, and then be wondering why nothing seems to be happening when it explodes. James Watt, like Thomas Newcomen before him, did indeed build atmospheric-pressure engines which depended on condensing the steam to produce a pressure differential for the power stroke (and he started down the road to his separate-condenser design when he was tasked with repairing a model of a Newcomen engine.) Watt was opposed to high-pressure engines on account of the danger, but you can't make an efficient and high-specific-power steam engine without going that route.

@jcgoogle1808

6 ай бұрын

I don't know which was more disappointing,.... the steam engine or the guy in the video whining about it or the comments whining about it. It has a safety valve here 17:40. The whole thing leaks like a sieve. They use water to pressure test pipe pipe because it isn't compressible. Using air to test pipe is almost as dangerous as using steam.

Thanks for a great video, even though you had me on the edge of my seat, waiting for that burner to create a pool of flaming meths across your desk. Thank heavens you survived unscathed.

A spring that is the right side inside the tubeing to bend it keep the walls from collapsing or sand packed hard to support the walls lovely and very cleverly made

You should turn this over to your friends and ask them to redesign it, the valve, the boiler and even the speed control. I'm sure they could easily figure it out. Thanks for sharing. Best Wishes & Blessings. Keith Noneya

The flames were too large because you didn't trim the wicks on the burner

@lmm

6 ай бұрын

That's not on the instructions. When I ran it a second time with reduced wicks, it just sucked up the meth and over spilled onto the burner top, and then ran down the side of the burner, on fire.

@scotthaddad563

5 ай бұрын

@@lmmmaybe just use less wicks and drop a bolt into the unused wick holes, hmm??

The way those flames went up the outside of the boiler, is exactly what happened to Greenville Tower. Should be banned immediately, Lawrie if it had gone up then your Insurance Company would not have paid out as it's basically a bomb.

@caramelldansen2204

6 ай бұрын

Grenfell Tower? Also, I don't think the reasons for the tower burning and the steam boiler having flames around it are even slightly close enough to merit comparison

@lmm

6 ай бұрын

I don't think it would have failed catastrophically on first or second steaming. That's not a good comparison

I took the liberty of fixing your video title: Breaking the Law (on UK) - Completely Illegal Steam Engine (on UK) from EngineDIY Shop!

I would wonder about the accuracy of that gauge given the heat and humidity changes and I’d also put two safety valves on it. Is it just me, but when the word illegal comes up, my rebellious youth pipes up and says “I want one!” It’s a beautiful engine and I would get one if the price was keener as it is ripe for modification with the burner and overall efficiency. Great video 👍🏻

This thing can't pass any safety regulations, not those for steam boilers only. The chance to get burned by flames or boiling water at some point is very real.

@jeffhiner

6 ай бұрын

A steam burn is far FAR worse than getting doused with boiling water, and a steam boiler explosion adds grenade-speed shrapnel to that.

@TheStefanskoglund1

6 ай бұрын

@@jeffhiner i don't agree completely about that - have a lot of respect for water which > 100 degrees celsius and in this case .... 120 celsius ? Water directly from a pressurized boiler is hot.

@jeffhiner

6 ай бұрын

Right, and water with enough energy will flash boil into steam as soon as the pressure is released. I don't think we're really in disagreement tho.

@user-hd9zg6gh4o

5 ай бұрын

If it wasn't dangerous , it wouldn't be fun.

@slome815

3 ай бұрын

That's the case for absolutely every model steam engine and boiler, including old Wilesco and Jensen ones.

When I was a boy in the 50's I built a steam engine from a Popular Mechanics design called Naclio using a tin oilcan as a boiler and there were no warnings as to the possibility you could get scalded or burnt fingers......apparently, we were more intelligent as teenagers in those days compared to kids of today and some grown ups too. After the first model we used baked bean tins and soft solder for the boilers......the steam pressure rarely exceeded 20 PSI.

@lmm

6 ай бұрын

Did that have a safety valve?

@gangleweed

6 ай бұрын

Yes, a simple spring loaded device as fitted to all of my model steam engines in the past.@@lmm

I high school we did the awesome experiment where we heated aluminum until it sparked and the stuck it into steam, where it spontaneously combusted. This looks like a more complex version of that experiment, just not intentionally

You hit the nail on the head, it's pretty and could be nice mounted on a board as a diorama and only operated occasionally. (I'm thinking mount a scale sawmill blade on it with a belt to drive it.)

Very interesting video and I agree this should have a safety valve being a pressure vessel and the gauge should be on the vessel. However, it seemed a bit of a risk running what appears to be a hazardous piece of kit indoors with a naked meths fuelled flame 😮

@lmm

6 ай бұрын

Tbf, most my other engines have a firebox so the meth can't set fire to the table... If I run it again I'll use a tray under it.

@scottwillis5434

6 ай бұрын

Perhaps a bit less fuel for a trial run? And an extinguisher handy.

The pressure gauge is in the engine, so if the pipe between the engine and the boiler blocks, with no safety valve (as shipped), you will build hand grenade pressure in the boiler without even knowing it. No amount of sloppy tolerances in the engine and venting of steam there will protect you from that particular flaw. Having said all that, it is a very entertaining little "toy" all be it one that is somewhat dangerous. Fit a small stand on top of the boiler and all that waste heat could be put to good use keeping your coffee warm. ;~) OK it would make it even more of a tip hazard, but what the heck, we are already getting spattered with scalding water, and risking fragmentation injuries, so a mug of hot java is the least of your worries.

@lmm

6 ай бұрын

Yep. It's a serious design flaw.

The steam engine does not have to be so wasteful. The Doble steam car, for instance, uses a flash boiler and runs steam through a closed-circuit steam cycling system: The steam cools after exiting the engine and condenses to water before pumping it back into the boiler. There are also many steam enthusiasts building compact and efficient steam engines.

Just a thought experiment/modification: Place a metal tray under the entire system to collect the excess water. attach a small Genny/DC motor to the flywheel shaft. Use the electricity to power a Hoffman apparatus. Use the H+O2 as fuel instead of the current fuel. It would be interesting to see if you could run it on salt water. Maybe do this outside.