Vex IQ Full Volume Robotics | Everything you will ever need for your career! | Ideas and Concepts
Ойын-сауық
Here are lots of new ideas, concepts, test runs and explanations for Vex IQ! I hope you enjoyed it! Please subscribe!
Music: • Alan Walker - The Spectre
Пікірлер: 96
Wow, thanks man! This has been by far the most informative video i have ever seen on KZread!
@glenthegreat2962
9 ай бұрын
Glad it was helpful!
Thank you so much my team has been struggling and this gave us sooooo much inspiration to build a good robot
@glenthegreat2962
7 ай бұрын
Thanks for the comment!!!
Great design
@glenthegreat2962
8 ай бұрын
Glad you like it
hi I saw your video with the intake but I'm curious if it can be taking the green and purple cubes in at the same time or if it can only do one type or another so you have to wait for like the purple to finish going up before you can pick up a green.
Thank you for your videos, they’re great! Could you do a closer look at the phase through? Ours is having some issues where it flips to let the bot over the bar, but doesn’t always stay in place and the bot can get trapped in the supply zone
@glenthegreat2962
8 ай бұрын
bob blud
Thanks for collecting all this clips in one video. It helped us a lot. Can you make a tutorial about intake. We have some problems about it. I think everyine needs a tutorial about intake. Thanks...
@glenthegreat2962
9 ай бұрын
Of course, I will find time to make a tutorial next week.
@user-cv2ly6wq4b
9 ай бұрын
Thankss. I am waiting for it
@glenthegreat2962
9 ай бұрын
ok!!!@@user-cv2ly6wq4b
@glenthegreat2962
8 ай бұрын
@@user-cv2ly6wq4b Hi there! Here is a guide for the intake system: kzread.info/dash/bejne/q5dtwY-jZbS_pc4.html
thanks a lot , it my team aton, now we live we love we lie
@glenthegreat2962
8 ай бұрын
Ok man
Hey Awesome Robot!! Just 2 questions, do you know what the world record score was for that one clip? Also, how many points are you averaging with this robot, either in competition or skills?
@glenthegreat2962
8 ай бұрын
Hello there, The world record was somewhere around 150 points! I have not tested my bot yet because I do not have a field at home ;(
@RaidenHess11
8 ай бұрын
Thx @@glenthegreat2962
@glenthegreat2962
4 ай бұрын
🤪
Wowowow
@glenthegreat2962
8 ай бұрын
I agree
Wow this is amazing! Would you mind if I use this as inspiration?
@glenthegreat2962
9 ай бұрын
Absolutely! Im happy you found it helpful!!!
@Ymf3699
9 ай бұрын
@@glenthegreat2962 thanks :D
@glenthegreat2962
9 ай бұрын
👍
How did you make the rollies within your intake system? The grey stick thing that connects them?
@glenthegreat2962
8 ай бұрын
Oh, yes. the grey things are called mini standoff connectors but you can also use washers for the same purpose.
Awesome machine! Is it possible to get the design or a part list for this design?
@glenthegreat2962
8 ай бұрын
Sorry, no
Can you please make a video on how to make a very smooth intake system for purple and green cubes?
@glenthegreat2962
7 ай бұрын
Just use less rubber bands and make the intake more wobbly.
I seem to be getting a problem with my omni-wheel not being powerful enough to work on uneven (not perfectly flat) game fields, did you also experience this issue? If so, how were you able to fix it?
@glenthegreat2962
9 ай бұрын
Hi there, great question, I have experienced this problem with my bot as well. All you need to do to fix this problem is to place the shaft of the omni wheel on a connector so it is closer to the ground. You could also use washers to solve this problem, however, but using washers is a bit more complicated. If you need more help, I could make a tutorial so you could understand better!
@dominiciuga5544
9 ай бұрын
@@glenthegreat2962 Thank you very much for the help. Do you mind sharing your team name so we can mention you in our design notebook? 😀
@glenthegreat2962
9 ай бұрын
Sure, our team is 610A. We are from Canada and we are a team of 5!@@dominiciuga5544
How do you build a phase through robot for the supply zone? I need help on this and you are the only person I know who can help me, please?
@glenthegreat2962
8 ай бұрын
alright bro, i'll do it. The video will come out later this week or sometime next week
@glenthegreat2962
7 ай бұрын
Hi there, sorry for not responding earlier. Here is the new video for the phase through drivetrain: kzread.info/dash/bejne/i6eVw8quaJPTZ9I.html
@srishanthjakka416
7 ай бұрын
@@glenthegreat2962 thank you so much
@glenthegreat2962
4 ай бұрын
No prob
hey could you make a video on the elevator system? it looks very efficient
@glenthegreat2962
8 ай бұрын
Sure, I'll find time next week! Stay tuned!
@glenthegreat2962
8 ай бұрын
Here is the video for the elevator system: kzread.info/dash/bejne/k2GWsNGqkqauiag.html
@darkshadow_323
8 ай бұрын
Thank you so much!!!
@glenthegreat2962
4 ай бұрын
🙃🙂
With this desgin for the outtake how many cubes can it hold and still go up. I imagine even with a 1-10 gear ratio the motor would still somwhat struggle on it own
@glenthegreat2962
8 ай бұрын
Yea, with one motor, it can only hold 12 green and 6 purple
I was wondering where you put your elevator lift moter also what is max points this robot can score
@glenthegreat2962
8 ай бұрын
Hi there, here is a video for the elevator system: kzread.info/dash/bejne/k2GWsNGqkqauiag.html
I need help on how to build the intake, my intake doesn’t work and the flywheels keep stopping mid way
@srishanthjakka416
8 ай бұрын
And exactly how do you connect the flywheels together to make them all spin well?
@glenthegreat2962
8 ай бұрын
Hi there, I will be making an intake explanation/tutorial video sometime this week or next week so stay tuned for that. I think it will help you.
@glenthegreat2962
8 ай бұрын
@@srishanthjakka416 Here is a guide for the intake: kzread.info/dash/bejne/q5dtwY-jZbS_pc4.html
@srishanthjakka416
8 ай бұрын
Thank you so much!
@glenthegreat2962
8 ай бұрын
@@srishanthjakka416 :)
Hello, the first robot you shared is very nice. I want to make it with my students. Could you please send me your pictures?
@glenthegreat2962
8 ай бұрын
Thank you for your kindness, but unfortunately, I do not want to leak too many of my ideas. I can make more explanation videos if you want me to?
Hi, for your elevator system how do you stop the gear from slipping?
@glenthegreat2962
8 ай бұрын
I did not use gears for the elevator system. But a way to stop that is to sandwich the gears with beams.
@ultranoobthing
8 ай бұрын
can you make a video regarding how the elevator works? I'm sure it will benefit a lot of people.
@glenthegreat2962
8 ай бұрын
@@ultranoobthing Ok, I will try to find time to make the video next week.
@ultranoobthing
8 ай бұрын
thanks a lot!
@glenthegreat2962
8 ай бұрын
@@ultranoobthing Here is the video! kzread.info/dash/bejne/k2GWsNGqkqauiag.html
How do you move the suction cup forward and backward?
@glenthegreat2962
6 ай бұрын
what is a suction?
Bro, the clip at 1:45 i want to know is it autonomous or driving, just curious.
@glenthegreat2962
8 ай бұрын
Nahh, this is a driving program. I hope you liked it!
I am having trouble getting the purple blocks up, have any tips
@glenthegreat2962
5 ай бұрын
TIP: Visit the zoo to see my relatives
@user-mr1kg7ci1u
5 ай бұрын
@@glenthegreat2962 🤯🤯
@glenthegreat2962
4 ай бұрын
🐌
damn 5 months ago 😭
@glenthegreat2962
4 ай бұрын
Yeaaa
Are these your robots? And if so why are the wheels on your drivetrain not in a straight line?
@glenthegreat2962
9 ай бұрын
Hi there! Yes, 50% of these clips are my robots, the drivetrain was not in a strait line because i was using chains.
@NevinTheGreatOne
9 ай бұрын
Thanks for the info!
@glenthegreat2962
9 ай бұрын
no brobs@@NevinTheGreatOne
@NevinTheGreatOne
9 ай бұрын
I have one more question. How many motors are on your elevator lift?
@glenthegreat2962
8 ай бұрын
@@NevinTheGreatOne I have 1 motor for the elevator system
where do you put your robot brain tho?
@glenthegreat2962
8 ай бұрын
You don't blud
Please help me instructions
How to build do you have instructions
@glenthegreat2962
8 ай бұрын
Im sorry, I do not have instructions. It would take too long to make.
@ultyman24
8 ай бұрын
@@glenthegreat2962 all good what is kinda weird is that you can buy the instructions to build this Robot for ¥300 which is 2$ usd
@glenthegreat2962
4 ай бұрын
That means I can buy 50000 build instructions
watch it get reposted to bilibili again lol
@glenthegreat2962
9 ай бұрын
I'm looking forward to it!
Thanks for collecting all the information!
@glenthegreat2962
9 ай бұрын
Any time buddy!
Awesome machine! Is it possible to get the design or a part list for this design?
@glenthegreat2962
8 ай бұрын
Sorry, no. I do now want to leak too many of my designs or people will copy my ideas.