I bought a VEVOR 30 litre ultrasonic cleaner which failed within two days. The fuse holder melted and two circuit boards showed signs of overheating. They advertise a 30 day no hassle return policy and after a number of emails and requests for photos, they sent two circuit boards which solved the problem. However, one board showed signs of corrosion as it appeared as though it was stored in a very damp environment. They also refunded about 1/3 of the original cost for the bother. So far, the machine is still working. I'm hesitant to buy anything of any cost or complexity from them. Cheers from Eastern Canada! 🇨🇦

@D3Sshooter

2 ай бұрын

Yep, indeed ... tools at half the cost ( as they claim) but also half the quality. I was asked by them ( after this failure of the vevor stud welder) if I wanted to test their products and announce it in my video's... whereby I would get the tools for free and 5% on the sales... I refused ... I am to direct and honest to spoil my channel with tools that are low quality. And will certainly not recommend something to subscribers or viewers that I not stand behind... Thanks for the comments

@bradcrossman5068

2 ай бұрын

@@D3Sshooter Steve, i have heard that offer elsewhere on youtube. VEVOR seems unafraid of criticism of their products. It reminds me of the saying, ''there is no such thing as bad publicity''.

@pierredupond8061

2 ай бұрын

​@@D3Sshooterbetter have a good tool that you can by used, than this low quality product. With this low quality product, you will do bad work, spend your time to repair it, ... That's unfortunate that they are sponsorised review that don't tell the truth on real product quality (or they send "special" good device to tester).

Excellent follow up video..I admire your fairness that you actually gave the manufacturers the benefit of the doubt. The machine seems to perform better but it still looks like a prop from a 1950s Sci fi film..Thanks for uploading.

@D3Sshooter

2 ай бұрын

Thanks and indeed a SCIFI prop - so funny

Great video, really interesting, thank you! And thank you for a honest, genuine youtube review - something very rare these days....

@D3Sshooter

2 ай бұрын

Glad you enjoyed it!

Such a sophisticated and knowledgeable man using Mac OS, we all have our flaws folks

@D3Sshooter

2 ай бұрын

hahaha, it could be worse - Windows- the only windows I allow in the house are those in the walls - lol

@chrismcgowan5180

2 ай бұрын

@@D3Sshooter Couldn't agree more, you struck me as a Debian guy. However you do like your photography etc. so apple makes sense in that regard

@D3Sshooter

2 ай бұрын

@@chrismcgowan5180 its out of laziness Chris... but I do like the Debian Linux Release from back then... when to all of that over the years , even Solaris.... lol

Hi Steve, the little tuning worked great. Well filmed and presented😊👍

@D3Sshooter

2 ай бұрын

Glad you enjoyed it

Steve - Thanks for the follow up video and well done in your usual fashion. I just checked the Vevor site for this stud welder and there is nothing that says what size triac is used for the gun, only that is "800 watts" capacity. I know from watching other videos of Chinese manufactured electronic items, their power measurements are suspect and can be off by as much as 50% from stated to actual. Glad to see it is welding at capacity now, but this is the type of item I may decide to pay the extra money for a US or European manufactured gun, knowing there is far more likelihood the gun will work as stated.

@D3Sshooter

2 ай бұрын

I would say,if you plan yo use a tool like this... don't take any changes and buy a good tool.. This Vevor business is specked with poor material

It would be interesting to see the power of the transformer in the short circuit test, then there would be no more doubts. The 80A triac only guarantees a higher peak in inrush current... but since the trigger is timed, it does not reflect the real power of the transformer, which is probably why they didn't put the heatsink on the component. As for me, this gadget is a cheap clone of a machine manufactured probably in US, Europe or Japan, for a change. good work with the car, it's always a pleasure to watch your videos, greetings from Portugal.

@D3Sshooter

2 ай бұрын

It does indeed only allow a short duration of switching power, which in this case is higher then with the 40A Triac. However IMO design days ( electronics) we always used heatsinks for any power mosfet... Pro-longed use might cause heat damage to the junctions and substrate. In each case, it works good enough for now. Thanks for the comments as always

In the video of you welding the studs to your fender ----- I thought that weld was very weak ----- With the slide hammer ---- they just popped off ----- I think VEVOR should send out a new replacement with the -- Update -- in it ---- and not have customer make the modifications themselves ----- as for the -- Plastic Body -- should be made so it will with stand an impact --- and not crack or break ----- Would of liked to seen how well after new board installed ---that the studs stay attached to the metal with your sliding hammer ---- hopefully long enough for several pulls before pulling away from the metal ------ Glad VEVOR worked with you and got the problem solved and yes --- that was a quick turn-a-round ------ Thank you for sharing this with us and what to look for ------ Hope you have a Good week ------ Rodney

@D3Sshooter

2 ай бұрын

Thanks Rodney.... (Kortrijk ?)

Nice to see the follow up video. Real question is will it pull dents out. Careful, you’ll be a product tester.

@D3Sshooter

2 ай бұрын

Thanks for the tip!

Electronic engineer in the past, that would make a great video going back over your past career.

@D3Sshooter

2 ай бұрын

I still aim one, but now more on networking and cloud access... but , yes I have some stuff from the past

There’s an old saying; “You can’t make a silk purse from a sow’s ear.” Seems appropriate here.

@D3Sshooter

2 ай бұрын

indeed

Steve, Thanks for doing a follow up video. TBH I think they should have sent a new gun and returned the old one. I agree it should be someone who is qualified not a layman. This is obviously a common issue with some of there older stock but they should have been recalled if they're faulty in my book. Thanks for the warning. Cheers Dave

@D3Sshooter

2 ай бұрын

Its my pleasure Dave, and yes they should have.... but that seems the way they handle things

I just tack the washers and studs on with a blob of mig weld - much better than that chinese takeaway. Just knock the mig off with a slitting disc and a light file or grind to smooth off afterwards - job done.

@D3Sshooter

2 ай бұрын

good point , indeed

the updated unit would serve my needs just fine. I have to weld some 18g to 18g sheet steel as a patch. How would one know wether it would be an updated unit? Or have they ?

While I understand basic electrics, I know very little about semi-conductors etc. However, if an 80A triac is going to have any sort of useful duty cycle, surely the cables from the triac to the electrodes need to be much larger than what appears to be around 2.5 mm sq cables in this woeful machine. (possibly why they try to get away with a 40A triac) Also, I would be tempted to put an insulating sleeve on the central electrode to avoid shorting to the external electrode when pressed down. In fact a good thick sleeve might help to stabilise it a bit better.

@nabsp

2 ай бұрын

calm down friend! the machine will not consume 80A, the triac will only allow a greater peak of current when you press the trigger, we are talking about microseconds (inrush current), it will not burn your 2.5mm cables! You get these peaks when you turn on your fridge or your water pump... however your cables are also thin!

@D3Sshooter

2 ай бұрын

Indeed, good answer - thanks

@D3Sshooter

2 ай бұрын

See answer below, all it means i can switch more current ... not that it 80 amps ... my fuses at 220V are only 16 Amps...

Wrap thicker wire around the toroid to thr business end he welder. Maybe add another wrap or two around the toroidal transformer , can also improve the performance. Allowing more current, more voltage , this will cause more current to flow, putting more energy in to the the weld, If it had 10 gauge wire wrapped around the transformer replace it with 8gauge, or if it has 6x 18gauge wires add 4 more 18 gauge wires. Identical length to the original. And possibly wrap another turn or two around the transformer. To gain a little voltage on the output. To help fight the be resistance. Push mire amperage (more power,) into the part! I would possibly go as far as doubling the wire size, and leave the wire between transformer and work contact as short as possible, to prevent as much losses as possible. What is the power ratings on this thing anyway? About 800-1000 watts? Have a awesome day🎉!...

The stud welder you brought was on the lower end of there range I wonder what the results would be with there higher power 6000VA stud welder 🤔

@D3Sshooter

2 ай бұрын

who knows, but no more dealings with vevor for me

👍

👍👍👍👍👍

They should have shipped you your money back too!

@D3Sshooter

2 ай бұрын

yep, but they don't .. As one stated , all they care is sales..

No heat sink provided on the new version that is odd, if you can source that triac online you could upgrade your original one as a spare.

@Sydney268

2 ай бұрын

Not as easy as that, since the firmware will have been updated to provide extra power(longer duration), the triac has been upgraded to handle said extra power.

@D3Sshooter

2 ай бұрын

Yes indeed, and only 15 dollars/ euro for the TRIAC

I'm surprised that you're having an issue with this company. I've been seeing a lot of their products recently on a few different you tube channels. Q

@D3Sshooter

2 ай бұрын

Well, they have cheap stuff and it does not work at all in some cases ... Like the proof I have . At least they shipped a new and more powerful motherboard.. But that should not happen. In each case do not buy the tool if it does not have the improved power TRIAC in it..

@lasskinn474

2 ай бұрын

if you see a tool on 4+ youtube channels in a short timeframe it's product placements. just getting the tool for free counts and a lot of channels will do nice with them especially if they are trying to get into the game of getting more free stuff, the way the game works is that if you crap on stuff the pr companies handling the placements will mark you as someone who doesn't play the game nice. this is also why some channels have the best ebike of the year every month, never talk about the ebikes legalities going over the power limits etc (and on channels which normally do no ebike reviews at all). more established channels tend to be more careful when accepting the deals. and to reiterate most of the time no money changes hands at that level and they'll say something like that they weren't paid for the review, it's their honest opinion etc standard text, but just getting the device makes it a product placement legally in eu and usa - even if it's just for a loan - but the real psychological trap for the channel owner is that if they 'blow it' when doing the review they will not get more '''free''' stuff. edit: the stuff might even be good of course. you couldn't know it from such reviews tho

Check out what Vevor exactly is: a Chinese company that sells Chinese stuff for the DIY guys among us. Do not expect high quality or good after-sales policy.

@D3Sshooter

2 ай бұрын

indeed,

Nice job, but as you say, unless you complained, the original unit was no good. They obviously know of the fault

@D3Sshooter

2 ай бұрын

Thanks and indeed, one would expect that a normal business would recall the sold devices and replace them with a corrected uprated version. But they don't....

I think with Vevor products it helps when you have a YT channel and make videos about their products in order to get proper help from them. They (Vevor) give you a hard time in dealing with them.

@D3Sshooter

2 ай бұрын

That seemed to be the case... they were very fast in responding and even offered free products for me to test .... I said " No Thanks"..... see below as an extract from a mail from them yesterday: Hi, Steve As I've said before, we don't make any claims about video content and we respect the way you test the products. And you can test the product before you make the video. If the product's quality performance is not good, we can give up the review. If it still doesn't work for you, hope we will have the chance to work together in the future! Best, Carol ------------------------------------------------------------------ 发件人：stephan Fouquaert 发送时间：2024年5月14日(星期二) 20:52 收件人：Carol Liu 主　题：Re: Vevor Collabs Invitation Hi Carol, After some careful consideration, I decided not to do it. Main reason is time and most of all, I don’t want to spoil my channel as an in-parcel none commercial channel. Thanks for the conversations, and sorry for the time you might have waisted on me. Kind regards , Steve

Anything made in China is subpar quality....they don't care about whether it arrives broken or not working....the sale is all they care about....sadly buyer loyalty is not their strength because of this.... they usually are barely a working device from factory.... depending on what it is i already decide if it is going to last long enough to pay for the cheap price.... did returning it ? or exchanging it ? be any options?? If i have to repair a new product it really has to be worth doing when New... otherwise i learned my lesson decades ago on that issue... cheap and built like a toy isn't something that will last long...lol You need to use it fully now...slidehammer the studs to see how much you can pound it...your thick sheetmetal will not move before they break.... 🇨🇦🤓🤟

@D3Sshooter

2 ай бұрын

Yes indeed, lucky the dent pulling is completed

What is the point all these videos on this crappy product ? In the first video, you said you will return it !

@D3Sshooter

2 ай бұрын

I did opened up the case with Vevor, and instead of a return, I got this new board. So, the second video is all about how they handle us... something people have to know...