Nice job! One thing - when drilling with annular cutters - use firm downward pressure, in a continuous stroke. You should not 'peck' as that allows chips to bind in the side grooves on the cutter causing undo friction and scoring as well as enlarging the hole somewhat. Meanwhile - you have outstanding editing skills and your videos are very contagious! Could be due to you having such a great first name! Looking forward to the 16mm holes video - I'm guessing that's for the top of a fixture welding bench. Thanks for the humor! mike (yea , we have the same name!).

@MichaelRoachWV

5 ай бұрын

Dear Mike, Thanks for the kind words! I leaned towards peck drilling here because I was being somewhat cautious with my new creation lol. I needed to build my own confidence that the two bolts would be sufficient to hold the vise, and tap magic burns up super quick lol. I'm going to start using a thicker fluid for one-off holes, and then just use the coolant system whenever possible. Thanks for the kudos on editing... Every time I lie to myself and say, ok, I'm just going to do minimal editing this time... and so far that has yet to happen! The 16mm tabletop has yet to be started, but I've still got a bunch of videos to edit before that happens lol. Stay tuned and thanks for watching!

I made something similar last year. I used two pieces of scrap 8” channel iron welded flange to flange with a piece of 1/2” plate welded on for a flat surface to mount the vise. I have since welded a piece of 2” square tubing to the back and have used a piece of receiver hitch welded to a plate that I mounted to a beam in the shop. This unit pops into the receiver hitch when I want to use the drill and stores out of the way when I’m done.

@MichaelRoachWV

6 ай бұрын

I've already planned out a new design for a lighter version... my issue is, I have too many projects / videos in the works right now lol. I just finished filming a floating shelf bracket and have a bunch more in progress. I've seen the receiver hitch used a couple places, I think @GarageFab built a whole mobile rack for them. Whatever it takes!

Nice job thanks for teaching us personally I really appreciate it

@MichaelRoachWV

3 ай бұрын

No problem, I'm glad you found it useful!

For my Drill Doctor I buy replacement dimond grinding wheel replacement s by Drill Doctor... Works like new ...

@MichaelRoachWV

3 ай бұрын

I tried that too lol, mines just too sloppy

Off with the bolt’s head! 😂

@MichaelRoachWV

7 ай бұрын

Gotta handle them treasonous bastards!

Nice drill stand. Wonder if the mag drill could withstand making the vice move back and forth on the X and Y axis. Making a mini mill of sorts...

@MichaelRoachWV

7 ай бұрын

Ssssshhhh, jk, I’ve got an x-y vise, but that vise has too much deflection. I’m going to order a low profile table and try and Frankenstein mount it TOP of that. Fingers crossed ;)

@DrFiero

2 ай бұрын

@@MichaelRoachWV The bearings in the head of the DP are really only designed for compressive, not axial loads. So go gentle or you'll kill an otherwise great tool! Bought mine late last year, and it's awesome.

@MichaelRoachWV

2 ай бұрын

​@@DrFiero I'm somewhat interested in finding out, may consider tearing it down to see how it's put together. The typical issue with a jacobs chuck / taper with sideload would be avoided. But, it does have the capacity for a a 1.6" annular cutter, so that's what got me thinking, maybe it could handle a 3/8" endmill? I've been swamped in other endeavors at the moment though, so all of that is on the backburner for the time being!

@DrFiero

2 ай бұрын

@@MichaelRoachWV - as long as you went REALLY gently doing x/y moves... maybe?! It's more the quill bearings I'm concerned about since they were designed for z axis loading. Seeing as mine is a month or 2 old, I'm not taking it apart to find out. ;)

@MichaelRoachWV

2 ай бұрын

@@DrFiero totally understand, I’ve actually got two because they sent me part of a returned one the first time lol, that was a trip

What type of drill chuck you are using? one from vevor has a lot of runout...

@MichaelRoachWV

Ай бұрын

I bought a semi-cheap one, so I didn't need to mess around with a key all the time Chuck: amzn.to/3w1fb4X Adapter: amzn.to/3TYHtoS

Very good 💯

@MichaelRoachWV

7 ай бұрын

Thanks!

Came for the neat idea for a mag drill, stayed for the shitty healthcare joke.

@MichaelRoachWV

4 ай бұрын

Well, it took being disabled from 2016-2022 to get correctly diagnosed lol. Went to every Doctor, Hospital, University Hospital and Mayo Clinic Rocheste… twice lol. In 2022, I got diagnosed by a local Rheumatologist… 4 miles from my house. I’ve got plenty more shitty healthcare jokes, and jokes about shitty health, shitty care, etc 🤷🏻‍♂️

@mrvector257

4 ай бұрын

@@MichaelRoachWV XD

First comment! ❤