This press has worked like a charm for my projects kzread.infoUgkxajoEbapTfqWaadnqb04h6U576yxXp-FE . I didn't even secure it to my table top, mainly due to the fact that I was using a 15 lbs drill vise. It's not flimsy at all as to what others have claimed it to be. Make sure the locking nuts and levers are secured and there won't be any issues with light pressure and patience. I was able to drill through aluminum, plastic, and steel (steel took a while) with no problems at all. Yeah it took a little longer than a regular drill press, but I don't have the space OR the money for one.The instruction manual was worthless, but luckily assembling the press was intuitive. However, the manual would be good for ordering replacement parts if needed. There is a nice breakdown of the parts that are included in the kit. Before ordering, make sure it is compatible with your unit, it is clearly stated what models the press is compatible with.This was an excellent purchase for $40!!

The quick change drill shaft makes this a multipurpose unit, a mobile mag drill, drill press and tube notcher, what a brilliant, simple idea. As a photographer that loves to dabble in the workshop with steel and wood, fitting out my studio with heavy duty functional stands and tables, I really like the simply way you put your videos together especially the almost 360 rotation shot, very eye catching that only a few will notice.

The best versatile mag drill base design on KZread.

Love it. The angle iron underneath is brilliant. Thanks for putting this together.

@TheMetalist

4 жыл бұрын

Thank you for the Feedback 😁

@mikelastname

2 жыл бұрын

I was watching this puzzling over the angle until 6:15 then the penny dropped! very cool. I made a welding table like yours and now it's time to build a mag drill frame like yours.

I really dig how you're making the most of your workshop space. I've always wanted to build a mag drill press stand and this just might be the build that kicks my butt into finally doing it.

@TheMetalist

3 жыл бұрын

Awesome 💪

I'm impressed with how clean and organized your shop is.

@TheMetalist

3 жыл бұрын

Thank you 😁 But it is not always like that 😅

Was eine geniale und zugleich simple Idee mit dem Rohrschraubstock! 👍🏻👍🏻👍🏻

@TheMetalist

4 жыл бұрын

Dankeschön 😁

Perfect timing, just ordered mine yesterday. This will be my 1st project.

Thank you Mr Ahrendt, just what I need, a nice 'elevator' mag-drill stand. A simple and strong solution to magnetic drill hight limitations. With this I'll be able to use different types of chucks and work piece dimensions. Thanks again.

@TheMetalist

3 жыл бұрын

Thank you 😊 👍💪

I've been weighing up getting shot of my pillar drill to make space for a small lathe and was considering a mag drill.. you have convinced me to do that now!

@TheMetalist

3 жыл бұрын

Nice 💪

My brother, you are always on top. There are no words. You're doing great. Super!!!

@TheMetalist

4 жыл бұрын

Thank you 😊

That's a great build, very simple and functional. I'm going to buy a mag drill and attempt to build that same thing.

Beautiful bit of kit. Simple and VERY effective. :-)

awesome build i just got a mag drill was looking for ideas,,, now i have to my metal supply this week thanks for your time recording the build .

Great instructional vid featuring some FEIN tools! Thank you Medalist.

@TheMetalist

4 жыл бұрын

Thank you too 😁 you are welcome

@tunintunin3417

4 жыл бұрын

FEIN Power Tools Inc. - US Great video indeed. Quick question to Fein, how come you have time to comment on videos featuring your tools but no time to answer a support email to one of your customers that bought 20 diff tools incl.. this particular mag drill. Corporations only car about you until you buy their product.

That tube clamp was so simple but works perfectly!

Great idea. Great craftsmanship. Thank you.

@TheMetalist

3 жыл бұрын

Thank you too 😊

I have not word to describe this awesome job thanks for teaching us personally I appreciate it

@TheMetalist

3 жыл бұрын

Thank you 😁 You are welcome

Lovely idea Bro! I will be making one for my drill. That angle iron is ingenious!

@TheMetalist

3 жыл бұрын

Thank you 🙂

Wow nice! I have 2 mag drills from a job, sitting around in the corner. And my old drill press is junk. Looks like your idea is a perfect fit 🤘🤘

@TheMetalist

4 жыл бұрын

I hated my old drillpress..... and than i just seen this magdrill. Its so handy and i can carry it around to every place. I like everything light and mobil 😅

Def inspired. Love the design!

@TheMetalist

3 жыл бұрын

Thank you 😁

Thanks for a great video!! very nice setup

Now that's cool! Great build

@TheMetalist

3 жыл бұрын

Thank you 😁

Awesome build ! Great Vid !

@TheMetalist

4 жыл бұрын

Thank you 😊

Outstanding video. I just got the Dewalt mag drill. I thought about getting a drill press then thought about a mag drill, and this video put it over the top that the Mag drill is the best choice. Great video and outstanding idea keep up the great work.

@TheMetalist

2 жыл бұрын

Thank you 😁

@RideShareConfessions

2 жыл бұрын

@@TheMetalist You are so welcome. I am making the stand you made, but I will put an Oil reclaimer under it that I can use or remove when needed and a screen to filter out all the big stuff. I have a small space for now. I will be welding up a 10x 20 shied for my little workshop. I will see if I can put up a video after I make a stand and the oil reclaimer and I will put a link to your video also, Thank you again for the great idea.

@TheMetalist

2 жыл бұрын

@@RideShareConfessions awesome 💪😁

I love the camera movement. Very nice!

@TheMetalist

3 жыл бұрын

Thank you 🙂

I like that idea and will build something similar myself. Thanks for uploading a great video!

@TheMetalist

2 жыл бұрын

Thank you 😁💪

Some great ideas there mate - nice work

@TheMetalist

4 жыл бұрын

Thank you

Absolut Genial. Muss ich nachbauen. Wenn ich mir dein Equipment anschaue bin ich echt neidisch. Alles vom "feinsten".

@TheMetalist

4 жыл бұрын

Danke fürs Feedback. Ja hat irgendwie mit einem Akkuschrauber angefangen und dann ist es einfach nach und nach passiert 😅

@dirkmarris8958

4 жыл бұрын

@@TheMetalist Ist aber ja auch meistens so das man sich für ein Akkusystem entscheidet und dann dabei bleibt 😉. Gehe ich aufgrund deines guten Deutsch und den mir wohl bekannten Werkzeugmarken recht in der Annahme das Du aus Deutschland kommst? Da die Titel und Kommentare ja meistens auf Englisch sind war ich mir nicht sicher... Bin heute erst auf deinen Kanal gestoßen und echt schwer begeistert von den genialen Ideen 👍

@TheMetalist

4 жыл бұрын

@@dirkmarris8958 Dankeschön 😁 ja aus Deutschland nähe Freiburg 😊

I will try to build one! Nice work!!

@TheMetalist

4 жыл бұрын

Thank you 😊

VERY cool idea, thanks for sharing

Wow, this stuff is next level...Keep it up!

@TheMetalist

3 жыл бұрын

Thank you 🙂

Hi, I build one like this. Thanks for the idea. Very useful. You working very well.

@TheMetalist

Жыл бұрын

😁

Прекрасное решение. 👍🤝👌

That is awesome!

came across your channel today your builds are inspiring. I recommend putting a link to where tools can be purchased that you use in each of your videos work with sellers to get a little $ for sending people their way. Thanks for sharing.

@TheMetalist

4 жыл бұрын

Thank you 😁

Dieses Video hat mich Geld gekostet, denn ich habe mir kurze Zeit später ebenfalls eine Magnetbohrmaschine gekauft und angeregt durch Dein Video, auch eine Bohrvorrichtung nach diesem Bauprinzip hergestellt. Ich habe das Prinzip etwas abgewandelt. Die gesamte Vorrichtung ruht auf einem Untergestell und für die Grundplatte habe ich ein größeres Maß gewählt. In die Grundplatte sind neben den Bohrungen für die Befestigung eines Maschinenschraubstocks noch 16mm Bohrungen, um Anschläge oder Spannelemente meines Schweißtisches zusätzlich nutzen zu können. Deine Videos und Projekte gefallen mir sehr gut! Grüße aus dem Stahlbiotop

@Johannes39.10

4 ай бұрын

Gibt es davon ein Bild oder auch ein Video ? Klingt sehr interessant, aufgrund dieses Videos spiel ich jetzt auch mit dem Gedanken einer Magnetbohrmaschine statt normaler tischbohrmaschine für die Werkstatt

very simple and great , thank you, thanks for sharing, very dificould to make it better. build the same. the best i found

Like others here, loved your welding table video, and I'm now looking at some of your other videos, all good stuff mate, great to see you making the most of what you have available. Hope to be able to do likewise in the near future. Subscribed :)

@TheMetalist

4 жыл бұрын

Nice 😁 Thank you

Du hast sagenhafte gute Videoaufnahmen

@TheMetalist

4 жыл бұрын

Danke

very nice!

I am looking for another your DIY sir. Thank you.

I need one of these in my life

Thanks for the video gives me ideas to copy this

@TheMetalist

3 жыл бұрын

Nice 👍🏻

Outstanding!

@TheMetalist

3 жыл бұрын

Thank you 😊

Amazing!

Great Video!!!

@TheMetalist

3 жыл бұрын

Thank you 😊

Thanks, thats a great solution! An affordable one too. 👍

Nice!

thanks for showing

Genial, einfach genial 👍

@TheMetalist

Жыл бұрын

Vielen Dank 😊

Damn you're a clever dude!

@TheMetalist

3 жыл бұрын

Thank you 😁

Very cool

Bad Ass! Thank You! I have a new project now!

@TheMetalist

4 жыл бұрын

Thank you 😁 you are welcome

awesome!! was wondering what the angle iron was for. Blew my mind when I saw what it was for. Great thinking

@TheMetalist

2 жыл бұрын

😁💪

good job ! you cut the thick metal same as the case !

thats a great idea

@TheMetalist

4 жыл бұрын

Thank you 😁

Nice design. Unless you are only making 90 degree intersections, you would do great to add angle adjustment for more complex joints.

@TheMetalist

3 жыл бұрын

Yes thats right 👍🏻 it was a last minute desicion to put a angle steel underneath. Maybe i will build a real tubnothing magdrill there you can adjust the angle 😊

Maybe start using cutting oil when tapping and drilling holes. Keeps the bits a lot sharper. And maybe use some locktite on the nuts that need to stay put. Btw how do you cut angled pipe on this thing?

very cool

@TheMetalist

4 жыл бұрын

Thank you 😊

Beautiful work!!! What brand of magnetic drill is that, I like the quick change chuck

Do you feel limited by the 50mm drill depth? If drilling through 100mm tube, would you have to flip it or adjust it using the slide? New to mag drills, but shopping. I have only found one with a depth of more than 3". Last question, what is the portable drill stand do you use in other videos? It looks high quality, no amazon junk. Thanks in advance for the feedback!

Since U like the Fein tools, get the 9" slugger. I have it and youll hardly ever use a ziz wheel to cut again. Extremely nice surface finish, and although it says recommended 1/2 Ive cut to 1" thick 48 inches wide, u just have to empty the chip hopper frequently. Ive made a vacuum port for mine though but need to find some high temp hose and the chips carry all the heat away and have melted standard shop vac hoses.

@TheMetalist

3 жыл бұрын

At the moment you dont get it at the moment in Europe. But as soon as possible i will get on

@daveb1870

3 жыл бұрын

@@TheMetalist I could always send you one, just tap off one leg of the three phase, itll run a tad slow at 50hz but im guessin itll handle it.

Hey mate, I came across you weld table video and was that impressed I checked out your page and subscribed. Keep em coming, a lot of tips on there. One question, when doing small work, how do you choose whether to use TIG or MIG? Is it about the thickness of material vs heat distortion or more??

@TheMetalist

4 жыл бұрын

Thank you 😁 One thing is the look, Tig looks way better (my one) les grinding! "Stainless or Aluminium" If it had to hold to 100% i choise Tig, better control! Tig gets more heat into the material! Sometimes to much! I think is up from welder to welder, one is faster and another is slower.

КРУТО!!!!!

Great video content.. thanks for sharing. If I may.. how do you film the pan around shot ?.. and what you shooting with camera wise 👍👍 keep up the good work

@TheMetalist

4 жыл бұрын

Thank you 😊 its a arm hanging on the ceiling and its powered from a little Motor. At the moment i plan a Video to build something like that

@drpipe

4 жыл бұрын

The Metalist Superb mate like ur thinking 👍🙏🙏

Very nice build but floored.. You need to have it set up so the 4 threaded rods will allow the vice to pass through them.. if not trying to drill anything muck wider and you won’t be able to position the work under the drill bit.. I know because i made one and then had to modify it..

Hello Dirk, really nice channel, very inspiring indeed! What is the your mag drill model? Also any advice on QuickIn or Weldon?

You ara The Best, Man!!!

@TheMetalist

3 жыл бұрын

😅Thank you

Solid work! What kind of taps are you using? Would like to get me a set of power taps too.

@TheMetalist

4 жыл бұрын

Thank you 😊 that actuly tap for a Maschine (cnc) bluering or redring

Great content dude. What camera equipment are you using? How’d you achieve those motorised arc pans around your table?

@TheMetalist

2 жыл бұрын

Self made out of a 12v motor

Hey! Love your videos! What's the name of the tool you use to mark holes? It looks almost like a combination square, but it's got a block that's perpendicular to the marking surface, I've seen you use it on a bunch of projects and I definitely need to get one,

How did you do the camera pan at 3:00? Absolutely love your videos! Subscribed!

@TheMetalist

4 жыл бұрын

Thank you 😊 its a arm on the ceiling powered by a little motor

Awesome Idea, you just got another subscriber! :D Can you please tell me more about that drill you are using?

@TheMetalist

3 жыл бұрын

Thank you 😊 Its a Fein KBU 35-2

@djordjejanuzovic4165

3 жыл бұрын

@@TheMetalist Thank you!

Nice work man... but that pan shot @2.59 ... that's matrix movie kind of stuff :-)

What thickness steel did you use on the plate you cut up into components? Great video and skills, thanks for sharing.

@TheMetalist

3 жыл бұрын

Thank you 😊 8mm

@petermcquinney3360

3 жыл бұрын

@@TheMetalist Thanks, I am making some plans using Fusion 360 for my mag drill.

Great idea and video. As I noticed in the beginning, you say "First Version". Have you made any significant mods to this? I was thinking of building a similar one. Thanks!

@TheMetalist

2 жыл бұрын

The angle iron underneath

Top top

Hey buddy love your video question what brand of drill press this is and would you recommend a certain brand to purchase?

@TheMetalist

4 жыл бұрын

Thank you 😁 its a Fein KBU 35-2 in my opinion is this the best Brand for magnetdrills

@Sympul1

4 жыл бұрын

@@TheMetalist THIS was the info I was looking for. Thanks, and thanks for the amazing videos. Very well done.

@TheMetalist

4 жыл бұрын

@@Sympul1 thank you 😁

Great idea! When I used your Etsy link to the plans, the plans for the mag drill stand/tube notcher are not one of the plans available?

Excellent work. Could you share the model of the drill you used?

@TheMetalist

2 жыл бұрын

Thank you 😁 its a Fein KBU 35-2

❤❤❤❤

Found it!

Is that the Metabo BT18LTX Q tapping drill your using for the smaller holes? What do you make of it if do. Also is the second tool a Fein impact drill for the larger ones. What adapter are you using for the tap onto the extension? Thanks

@TheMetalist

4 жыл бұрын

For the smaller holes i used the Fein ascm 18qm. Yes the second one is a Fein 18v impact drill. I builded the adapter by myself I just used a old socket wrench nut. I find it out by mistake, it fits perfect 😅

@lewigas290

4 жыл бұрын

The Metalist Thanks for that. I’ll try and make one myself. Think I might invest in Fein cordless grinder next. Like that they have variable speed control and seem pretty compact. How have you found yours? Thanks for your help

@TheMetalist

4 жыл бұрын

@@lewigas290 the fein grinder got a lot of Power even in lower speed that also good if you want to polish something. Just the battery gets empty fast. With the battery drill or impact drill i'm able to work the hole day with just one battery. I guess a lot of power needs a lot of energy 😊

@lewigas290

4 жыл бұрын

The Metalist Thanks for the feedback that’s very helpful. Gonna make myself a stand and invest in a grinder too. Thank you for sharing your knowledge and ideas. Keep safe

@TheMetalist

4 жыл бұрын

@@lewigas290 you are welcome😊 i should start KZread earlier makes so much fun 😁

quick question at 0;04 what is the tool in the drill it looks like a more aggressive better hole saw? love the welding table build vid by the way!!

@TheMetalist

3 жыл бұрын

Its a special drill bit mostly used for magnetdrills.

@tommytton-mills9616

3 жыл бұрын

The Metalist sorry I meant as in make/manufacturer I’m after one. Thanks

@samkey5327

3 жыл бұрын

@@tommytton-mills9616 They usually use an annular cutter or carbide tooth hole saws

Maybe a stupid question, but as you boxed in the magnet with the tabs, wouldn't be adding a xy table make this a small powerful and mobile milling machine?

@TheMetalist

3 жыл бұрын

This Magnet drill is not good for xy movements to much moving. I wouldn't do it 😅

nice work pls let me know about your camera moving round

@TheMetalist

3 жыл бұрын

Thank you 😊 there will come a Video about it 😁

Liked the vid man! Tapped threads only to tig in place? You like extra work don't ya ?

Hello, I have the same drill and I am looking for the same chuck as you have automatic tightening, what is the reference of this one?

nice video how thick is the plate because it must be strong

@TheMetalist

4 жыл бұрын

Thank you 😊 its just 10mm

Hello, I bought the same band saw optimum like you and it's a really good investment. I'm comparing mag drill particulary fein mag drill and OPTIMUM DM 98 V. Do you have any advice about mag drill and did you try optimum mag drill ? Are satisfied about your fein mag drill ? Thank by advanced for your help.

What brand of drill mounted taps do you use and how durable are they?

@TheMetalist

2 жыл бұрын

I just use Standart bluering taps the Brand actully dosen't matter

Hello,your work is great,can you give me the height size ? Thanks

Top , 1A 👍🇩🇪

@TheMetalist

3 жыл бұрын

Dankeschön 😊

The Notch Master from JD2 works pretty good???? just saying.

do you an amazon page or a place with all of the products you use online?

@TheMetalist

3 жыл бұрын

Not now

What mag drill is this? And is it a good one? I use the Hougen at work but they're $$$$$

@TheMetalist

2 жыл бұрын

Its the Fein KBU 35-2 i love it 😁

Hi. Where did you get your drill press vice from?

Did you build the adjustable guide that you use your scribe tool with?

@TheMetalist

3 жыл бұрын

No i bought it

@stephensmith1388

3 жыл бұрын

Could you send me the link so I can buy one?

@stephensmith1388

3 жыл бұрын

@@TheMetalist I am so amazed at your work! I just started welding and once I finish my welding cart I’m going to buy your plans for your welding table

@TheMetalist

3 жыл бұрын

@@stephensmith1388 awesome 😁 Thank you 🙂

Hallo nochmal, ich baue gerade diesen Bohständer nach und will jetzt die M16 Gewinde schneiden. Ist das eine normale Akku Bohrmaschine bei 0:43 oder etwas anderes...? Ich hab hier ne ziemlich starke Maschine, aber die tut sich dermaßen schwer, dass ich den Vorgang erstmal abgebrochen habe. Much obliged!