Vespa T5 standard to malossi 172

Автокөліктер мен көлік құралдары

Created with Wondershare Filmora

Пікірлер: 14

  • @Dave_D
    @Dave_D7 жыл бұрын

    Most fun I had on a vespa was with one these kits and a mickeck but it was in the days before scooter dealers were using dynos so it didn't last very long lol I also had trouble getting it to pull in fourth but looks like that isn't a problem nowadays!

  • @TRADINGMAN1
    @TRADINGMAN18 жыл бұрын

    Is this with standard 24mm carb ? Would a l/h exit pipe like Pm increase the bhp any ? - love these dyno vids :-)

  • @shinyred

    @shinyred

    8 жыл бұрын

    +TRADINGMAN1 thanks ;) the sip pipe did well in scootering road test, I think the pm pipe would let it rev more so you would see more bhp but I don't think it would change the torque much if any . and torques what you want on a mile muncher

  • @tonyleirens3060
    @tonyleirens30607 жыл бұрын

    Hello "shiny" boys,one of the next weeks i'm gonna mount the same parts.Did you change the jetting,and how ? Did you put some modifications in the motor ? Clutch,christmas tree ........

  • @shinyred

    @shinyred

    7 жыл бұрын

    Hi ,no modifications to the motor everything left standard

  • @tonyleirens3060

    @tonyleirens3060

    7 жыл бұрын

    Normally , i think that the motor turns to lean without changing the jetting....Or am i wrong ?

  • @shinyred

    @shinyred

    7 жыл бұрын

    the jetting has been changed ,that's why its on the dyno ......always get the jetting checked after fitting performance parts ;)

  • @tonyleirens3060

    @tonyleirens3060

    7 жыл бұрын

    thanks for the info. now start with a nice big main jet,and lowering......

  • @luiespina
    @luiespina6 жыл бұрын

    Hola.. te hago una consulta.. por tú experiencia en estos setup .. para mi px 150 que es mejor.. malossi 172, polini 177 o pinasco 177.. agradecería tú respuesta saludos desde Argentina

  • @bebop6174

    @bebop6174

    3 жыл бұрын

    Malossi es solamente para T5!

  • @alexdebua2666

    @alexdebua2666

    2 жыл бұрын

    @@bebop6174 and its aluminum 172cc only...not 177 like for other px models..if you want a 60mm over the 55 original stroke you can reach 180cc..

  • @0743pm
    @0743pm7 жыл бұрын

    hi i get a piaggio zip sp2 with a malossi replica, 19mm carburetor, yellow malossi springs, green counterpressure spring, delta clutch, carbon inlet malossi, polini for race3 exhaust, malossi multivar with 6,1g can u tell me, what ist the best spring for my exhaust or u have a little setup tip thx

  • @shinyred

    @shinyred

    7 жыл бұрын

    I would get the strongest contra spring you can this will help the most ;)

  • @0743pm

    @0743pm

    7 жыл бұрын

    shiny red thx i wanna try it

Келесі