Cosa for the win! 🤘🏼😎🤘🏼

Good on ya, Tommy! She sounded good...seemed to get up and go! Now, I'll go back and watch the whole engine rebuild. Thanks!

Nice work and sounds great!

3:46 Second time out is the charm

Nicely done.👍 Jim🏴󠁧󠁢󠁳󠁣󠁴󠁿🙂

@smallborecorps

4 ай бұрын

Thanks Jim!

That is one clean ass p

8:32 “seal of approval” hahahahha. So glad it’s working. I also what happened to the neutral switch.

@smallborecorps

4 ай бұрын

The mechanism is broken in the selector box. It needs to be replaced if I want it to work. It's not a big deal though. Scooter runs perfectly fine without it.

Nice Smallframe Seat Conversion. Do you check the Idle Screw? seems little bit on the rich side. Greetings from Germany

Great job you always do a good job of explaining your work just one thing I'm new to the vespa scene it seems to me everyone leaves out one thing nobody ever shows how to fill the oil tank you talk about priming the tube but how do you fill the tank does the fuel tank have to be removed to fill the oil tank?

@smallborecorps

4 ай бұрын

Thank you for the support. The oil tank is separate from the gas tank. The fill holes are next to each other when you lift the seat. If you watch closely when I'm filling the tank with gas, there is a grey cap there. You remove it to fill the oil. In the video before this one, I show how to fill both the gas and the oil tanks.

What tire pressures are you rocking?

@smallborecorps

4 ай бұрын

Around 30 psi front and rear...

@chaznasty814

4 ай бұрын

@@smallborecorps thanks bra

@PaulPX

4 ай бұрын

30 psi is way too much. 18 or 20 in the front gives way more feel to the front end. Rear should be mid twenties at most.