Very simple way to make auger
Ғылым және технология
With the help of my device , you can very easily make the auger of washers , you need steel pipe diameter as the washer and cut it as I showed in the video , the spiral is perfect ,bending by hand it is impossible to make that spiral, with the help of hammer you should only hit the top of the device and remove the perfect spiral for auger , then weld together , this system is possible to make larger auger only you need bigger pipes , thank you for watching .
Пікірлер: 275
Dude... you literally just saved me days if not weeks of wasted time on a project I've now put off for 4 years because I needed to make a set of small augers
@andrewdelgado4374
7 ай бұрын
You too huh? Hahaha what are you making?
Brilliant - my husband was so pleased when I showed him this - he has been struggling to make a neat auger and this solved his problem.
@5starking696
2 жыл бұрын
😇
Hohooo!! Way better than bending by hand. Good job, sir!
Love your stuff, Mladen. It always makes me feel as though I should get off my arse and head out to my workshop.
Bravo! Thank you for sharing. Keep up the good work!
Wow! Great and practical tool...Thanks for giving idea for my project.
Hi Mladen.... I made an auger a ýear ago as a post starter. I followed your design and the pipe stamp exact. The washers I could only obtain here are thin 1.2mm. Ridiculous. On using for first time it worked great. Then I must of hit a stone that bent the front lead tooth of the washer. That made it useless. So I left it. One year + later I dug it out and welded a 3mm mild steel lead to the bent front of the washer. I tried it and I'm so happy that it has worked as a pre hole guide to wooden pegs I've driven into the hard clay soil. Saving me tons of time and effort. I just had to come back to your channel to thank you. *THANK YOU* 👍👍👍👍👍
Sir Your very clever. Thank you for sharing and teaching so many people. Most kind of you. Thank you from northern Canada. God bless.
Great design, great video, fabrication, explanation and English. Thank you Malden.
Thanks I made my device at work. Very nice process. I'm getting my warshers later. Saved me about seventy dollars to make myself.
Many thanks. I pray you make a lot of money! You gave me a starting point to make 15” -38.1cm flights for earth auger. With 9.53 mm steel.
My diy former didn't have the flats at the ends so the washers wouldn't align properly, this helped, thanks for the post !
this is very important.......... good job
Thanks for your best advice. You solves my combine machine auger problem
GENIAL. CONGRATULACIONES ,gracias por compartir sus valiosos inventos.
Thank you for all the helpful videos and ideas.
God Bless you. You are very simple and honest way to demonstrate which help me a lots for my new project.
Very perfect DIY ! Thank you!
Timeless thinking. Admirable. Thanks for the inspiration.
wow...you're a genius...
@Mladen365
7 жыл бұрын
Thank you
very nice. You showed me the simplest idea to make it for prototype of a product. thank u
thank you for the great video. don't know how I didn't think of this or something similar
Great idea and implementation! Thank you!
if anyone is interested in a variable compression auger, try doing it on a lathe. if you want a 10mm diameter auger, with 5 lifts on a taper shaft, just chuck up a piece of 10mm round stock, with a slot milled down to the center of the rod. Drill the first hole to the smallest diameter of the auger shaft. part off the first "washer" and continue to the next size hole. You'll have a neat compressive auger for your next project. The shape of the lifts could be shaped as indicated by the device in this video. Clever way of shaping these discs! Thanks for sharing this.
Such simple solution to a complex problem. You are a genius. Thank you :)
Inventive! Excellent Hand work!
Now am able to grasp the concept, Since am in process of making one out of cardboard. Wanted to make a cat feeder by using the 3 inch T PVC fitting. Since it's relatively economical to build one out of scratch with minimal cost. Thanks
thanks bro I m worry abt to make dia for screw flight but u solve it in seconds thank you so much this is very usefull for us
Brilliant idea, pal! Thank u for sharing ur design.
Outstanding video. Thank you!
This really is an Archimedes screw, just what I need to move small coal into a boiler firebox. Thanks for the design!
Another great idea .............Thanks Mladen
@Mladen365
8 жыл бұрын
Thank you,this is very easy way to do it
thanks good video and nice idea, i am planning to make an auger to drill small holes in earth for seed planting, i like yours and maybe will make the form someday but think all i need is a couple at the bottom and dirt will life , i do not need to go deep but great vid and cleaver work! thanks
It's perfect idea. I love it. Thanks from middle East
Nice Job i'm Well impressed - Thank - you very much
Great explanation and very helpful. Thanks
brilliant thanks, perfect for my project.
GREAT video, thanks for sharing! This method is so easy, I wish I had thought of it.
@Mladen365
3 жыл бұрын
Greetings from Croatia
Thank you for sharing this wonderful article
Thankyou. Nice . You have solved my problem.god bless you
Outstanding! Thank you for sharing!
Thank u sir. From Nigeria. I really need this.
brilliant, great idea , thanks for sharing us.
brilliant idea! mostly for smaller screw flights which is harder to form by hammering alone. Good for handymen.
@Mladen365
7 жыл бұрын
Thank you,greetings from Croatia
Thanks for sharing your ideas!!
Fantastic!! Great Job on something hard to make!!!
Genius. Best auger making video l have seen.
Best video on this subject i have found so far 🤘nice work
Nice job Sir, Very ingenious Thank you very much for sharing Hi to you in Crotia, Michel Canada
Very good job my friend
Great work thank you for showing your good tool👍
great idea! thanks for sharing!
Very good idea. Thank You for your time.
Very cool easy way of doing it, thanks 😉
This is a great jig, you could use a bottle jack for the compression and you only really need a few inches of pipe
Thank you my Broooo... You save my Job today 😎😎😎😎
Excellent idea, excellent work! Exactly what I looked for! Hvala!
@Mladen365
7 жыл бұрын
Thank you,greetings from Croatia
my congratulation for the nice idea. Parabéns, uma boa ideia, simples e eficaz.
I loved it, very genius taught, Thank you for your video and uploading and sharing your knowledge.
@Mladen365
7 жыл бұрын
I will always share and help others,greetings from Croatia
I like your video.thanks.
Brilliant video! I've seen large (1m and bigger) industrial auger blades formed, and other than $600,000 in equipment, this is, more-or-less, how they are hydraulically formed and assembled. I was thinking about making pellet-stove feed augers, and this will work perfectly.
@Mladen365
7 жыл бұрын
In my previous video how i made auger,i cut washers and bend them manually,it is good but auger did not look nice,this device help me lot,it is easy to use,very cheap and now auger look how it should be,greeting and thnx for watching
Excellent job. Simple and extremely effective. Nicely done.
@Mladen365
7 жыл бұрын
Thank you,big greeting from Croatia
allot of people would just go buy one, but I think this is cool. making your own. You could have a whole set. There's something about making your own that's special t that many just won't understand. Very cool.
@Mladen365
7 жыл бұрын
Thank you,greeting from Croatia
@curriegc3611
7 жыл бұрын
Mladen 365 Thank you and greetings from Los Angeles. One of my dad's best friends is from Croatia and he is a pastor/missionary there in his home town or area, I'm not sure where.
@Mladen365
7 жыл бұрын
It is nice to hear that
The simplicity is the inspiration of God that is transformed into genial ideas. Congratulations my friend.
@Mladen365
6 жыл бұрын
Thank you,greetings from Croatia
....excelente dispositivo para hacer helicoidales a partir de arandelas planas....sencillo y muy demostrativo y funcional.....felicitaciones al ciudadano ruso....Mladen 365.
Very nice work my friend! Thanks for showing us how to do this!
@Mladen365
7 жыл бұрын
Greeting from Croatia
Great job has always thank you. All my best. Bobby
Cool idea thanks for sharing
Love you man you are a beautiful mind.
I like that small vice you use to hold the washer as you're cutting it. Nice video!
@Mladen365
5 жыл бұрын
Thank you,greeting
Beautiful, inspiring, thank you!!!
@Mladen365
7 жыл бұрын
Thank you,greetings from Croatia
Thank you, very good and simple, I am subscribing because you videos is very helpful.
Thanks for your idea, it will helpe me a lot...
Thank u....u gave me a brilliant idea 👍
Ingenious!
Thank you !
fabulous device you have made you solved my problem thanks..
@Mladen365
7 жыл бұрын
i am happy if i can help,greeting
Excellent. Thanks.
Well done sir ! You put science in the hands of everyone !
@Mladen365
7 жыл бұрын
that is why i make my projects,i want to help other people in the world,greetings from Croatia
@astasna
7 жыл бұрын
I respect that so much ! I want to do the same.
Nice work and very creative!!
Muy Bueno Felicitaciones amigo
Perfect, thank you
nice job, great job thinking that through
Brilliant! Thank you!
@Mladen365
4 жыл бұрын
Thank you,this tool help a lot of people,greetings from Croatia
Good idea and practical to use
Very nice thanks for sharing your experience
Very clever and simple device, great idea.
@Mladen365
7 жыл бұрын
Thank you
Like it man! I would use a press but with a hammer it works also. Good job. Always enjoy your video's
@Mladen365
8 жыл бұрын
Thnx
Very good idea .
thank you so much for sharing
Nice idea ,well done.
I like; very good job congratulations.
Very good !!!! Nice Video!!!
Nice work. Very good results too.
Thank you very much Sir to share knowledge.
Fantastic!
Молодец, спасибо!
very helpfull.... thank u dear sir
Really excellent idea. Ur really a genius.
Good job Thanks man🧠🧠🧠👏👏👏🎉🎉🎉