for anyone curious what this mod does, it allows you to tap into the full power of the PS2's Emotion Engine so you too, can feel emotions for the first time in a long time.

@Sebastian_Athea

6 жыл бұрын

I feel emotions every time I grasp the soldering iron

@SianaGearz

6 жыл бұрын

Sebastian, try grabbing it by the handle rather than the hot metal bit at the end, then you won't have to fight pain every time.

@IceDelight

6 жыл бұрын

I'd like to feel emotions again.

@blazedyoda8608

6 жыл бұрын

what are you guys on about haha

@starfox.64

6 жыл бұрын

mark porter we're trying to get emotions again from the emotion engine in the ps2s we own

Random guy on the internet modded my PS2 years ago. Dug it out and checked. looks very similar. nice

@Shadetree_Mechanic

5 жыл бұрын

木ノ下じょな was it modchipman.com

@JosephZZ

5 жыл бұрын

Was it Oh Yeah Yeah gang 2019?

@tomwilkinson3336

3 жыл бұрын

nice

Music made it sound like I was watching the Power Rangers

@white_african_9731

5 жыл бұрын

hahahahaha i thought the same hahaaha

@Madman-vs7gp

5 жыл бұрын

I keep trying to figure out what music it is, is it From Ys

@salmonslapper

5 жыл бұрын

@@Madman-vs7gp It's a cover of the Megadrive's Thunderforce IV - BioBase level, No idea who by but it's deffo that.

@icyjiub2228

5 жыл бұрын

Guys its this kzread.info/dash/bejne/hqKAo6Vuca22pbA.html SSH cover of Thunderforce IV music. Fucking Facemelting.

@somebonehead

5 жыл бұрын

@@icyjiub2228 All of SSH's songs sound exactly the same.

i feel cheated that he couldnt have even showed off what the mod actually does after all that

@pointblank0020

4 жыл бұрын

It's a modbo 4. It plays burned discs which is pretty useless now for PS2 because softmodding exists, but it's good for PS1 burned discs

@Andreas-pe2ez

4 жыл бұрын

Womp womp...

@RanaRandom

3 жыл бұрын

@@pointblank0020 WOOT WOOT WOOT...

@darklink4160

3 жыл бұрын

@@pointblank0020 Agreed. Playing burned discs also wears down the laser faster then normal. Softmodding is the way to go for almost any system.

@sirlimen333

2 жыл бұрын

@@darklink4160 problem is that some games don’t work through soft modding

What... Wait! No hotglue, no Epoxi tar, not even a paperclip, can I realy trust this?

@rodmongodwood

6 жыл бұрын

well he drowned the IC pins in superglue, burned off the isolation of the wires and he clearly uses too much heat when soldering. pretty painful to watch actually

@matty1234a1

6 жыл бұрын

rodmongodwood he does seem to run his iron near the max, but who knows mabey when you need to make a quick joint and not sink heat into the packages thats what you gotta do on this kinda mod, the super glue is a touch sketch

@mrspike1234100

6 жыл бұрын

actually there's a very specific reason he's doing this, with the ps2 came some of the first of what's called "micro solder beads". because of them being so small the system did what's called solder Beading, where it would heat the solder very quickly and cool it very quickly upon startup (ergo the really cool pillars which also tell you how much memory is being used on your games) because of this effect the solder has to be heated very quickly then cooled very quickly as well to keep it from "bubbling" which is really more of small particles of air bubbles inside of it that keep the connections from working correctly. It's actually really cool to watch in slow motion from an atomic microscope.

@Voultar

6 жыл бұрын

rodmongodwood I submerged the pinz in super glue. Also 365c is a perfectly healthy temperature. You would know that if you only knew what you were talking about. Lolez

@sheep1ewe

6 жыл бұрын

Yes, Led free solder (at least those particular types i hawe tried), needs a bit higher temp. on old stuff even if one do it correct, compared to the old scool 60/40. It´s easy to sit back here and say things from the books, but in reality it´s often sort of an edge balance to get the correct temperature with that stuff, so i personally must agree with Voutar, at least based on my own experience i think he get good result... But constructive critisicsm is important i agree with that.

Great stuff as always, thanks for posting this. I just have to say that I get a real "Bob Ross with a soldering iron" vibe from all of your videos when the subject is simply the task at hand and nothing more. Keep up the great work.

Just a tip - old ide ribbon cables for conductors , keeps everything super tidy

@OtherDalfite

5 жыл бұрын

CAT 5 Ethernet cable also works pretty well but IDE is a classic and looks cool

So glad the 17 y/o version of me went the DMS 4 EZI path back then. Solderless DMS4 Pro chip. Super sweet. Still works to this day!

A god amongst men. Even though I'm not interested in this specific mod, your technique videos have taught me a lot and inspired me to challenge myself to more difficult mod work. Keep em coming my lord!

Just did a ps1 mod for the first time (first time soldering too) and it was a cinch. Looked into PS2 modding and I was like, damn, that's quite a step up in difficulty. Nicely done!

@Alexander_l322

5 жыл бұрын

Ps1 = x1 difficulty. PS2 = x2 difficulty. Lol probably not accurate but it may as well be cuz thaat shit in the video looks as hard as a jtag for 360 lol

@Hagledesperado

5 жыл бұрын

I just bought a PS2 for a tenner and modded it. The ROM was OK to do, but the tiny pin pitch on that other chip was too much for me. Now it's stuck in a boot loop. I'm definitely going to find some easier points to solder to, even if it means that some wires are going to be longer. I'm too old for this shit. Still having fun though.

Killing it with the vids lately! Possibly consider vlogs or just random conversations on certain topics relating to retro gaming or anything else. Will watch it all.

@teeffw2776

6 жыл бұрын

No, way too many fantastic and interesting channels reach peak interesting, and then the presenter talks way too much about their personal life, or starts getting chummy with the diehard fans who refuse to say anything negative about them, or they become a horrendous patreon vampire - sucking up tons of money but losing the little flairs and touches that made the channel unique and interesting. Voultar is simple, frank, to the point, and I don't want to learn anything more about him. Never meet your heroes.

I work with electronics and do mods as a hobby, and have for years. I always learn something from watching your videos. I appreciate the content, man. Keep it up!

I did this many years ago, and when I turned it on and IT WORKED i was in shock. Pain in the ass. I screamed out "IT WORKS" like Emmitt L Brown.

@geovani60624

4 жыл бұрын

I had ho re make some of these with my shitty soldering iron... believe me... it wasn't easy...

@amosramirez

3 жыл бұрын

What does de mod do?

Man that was intense. Cleaner than a tech mogul prototype board! I bet you could toss that PS2 down a flight of stairs and your work would still look good as new! Never seen anything like that.

Most Difficult thing here was to listen to that music, damn

@shinex5995

5 жыл бұрын

It's pretty good music but it lasted too long

@Vauxfan2k

5 жыл бұрын

Rehash of thunder force 4 soundtrack on the megadrive. Preferred the original tbh, and a change of track every 4-5 mins would have been nice. Otherwise top work. Have 2 machines with the matrix chip done on them. Still work to this day.

Great stuff, I have been psyching myself up to install a Matrix Infinity on my PS2 for like a month now - this is exactly what I needed!

I remember doing this 17-18 years ago with Messiah's and eventually Duo2 SE's and they certainly were wiring nightmares compared to this. I was in college and my previous experience was soldering larger microelectronics on RC Cars where things are VERY forgiving so the PS2 was a real cliffhanger, especially compared to other consoles of the era like PS1 that were a few wires and even XBOX where the JTAG pins were in a nice cluster.

Now I can absolutely see the idea and the ideas to make and be able to easily fashion anything with the kits offered and developed by you, super ... I like it, that's how i roll .

your soldering skills are amazing. i come here only to see the soldering. congratulations!

Quite a lot of those connections to the flat packs broke out into really nice pads and lands. I think I'd have reduced risk and used those more.

9:02 finger glued forever.

Nice job ! How much did you charge to do these back then ? I'm kind of surprised that no one has made a shaped PCB with the traces included so all you have to do is clip it down. I think I saw something like that for a TG16 mod once.

Finally found you Voultar, nice work as always! If you don't mind I downloaded the video for future reference, very nice work! Cheers ans subscribed!

10/10 video. I see I missed a lot of your newer stuff, better ring that bell button!

Great video. Couldn't have pulled it off without the Video. All praise Lord Voultar!

Wow that is a lot of wiring what's this mod for? Don't think ide do something this intricate unless it was for some major improvement but great work you still got it looks like something years of experience brings

I've modded a hundred PS2's. There is no reason to, now, you can soft mod the memory card, and do 10 times more than even the best chip could do. The only thing that a chip can do that the memory card mod can't, is CR-R burned discs. Burn them onto a DVD-R, mo problems. I still have mine, and it has a brand new laser that has never been used, since I keep my games on the hard drive. I am partial to the version 5 console, the SCPH-30001-R, the first incarnation of the second generation "high speed" consoles, before any software "updates". At my peak, I'd buy a brand new console, take it straight out of the box, and mod it. While I was at it, I'd leave a burned demo disc in the drive, and put it back in the box, so that whoever I sold it to could have the honors of the "enter language" screen that they only do the first time you use one, and when that was done, the demo would run. That way they know they got a brand new console, with zero miles on it. You have to be very confident in your work to do that.

@masheen_

5 жыл бұрын

Still have my own modded one as well. Oh the miles I've put on it! Xlink Kai is the way to go nowadays.

@CARLITOTESTIGO

5 жыл бұрын

pull out the 3v button battery and that screen shows again

@nitrax8629

5 жыл бұрын

I'm also partial to the F-chassis units - they seem to be built really well.

@yourfacemyjizz

5 жыл бұрын

This is how i feel about original Xbox modchips still being sold. Soft mod is a piece of piss.

@slayer7003

5 жыл бұрын

Video was made for posterity....So millenials could understand the tideous and complexity oldschool gamers went through....

oh thank god. I was watching some dude mod an xbox 360 but nobody makes good quality videos like you, i just had to watch one to restore balance to my mind.

You are an artist!!! All of my work is fine and works but typically my wires just sort of hang there (I make them as short as I can but not nearly as short as yours) That super glue thing does give me ideas, probably bad ideas but hey if I break it, it's mine anyway (I don't do mods for other people anymore.)

So much respect bro! I done all these mods back in the day but being 36 now I don’t think my hands would let me

@ichrismoku

3 жыл бұрын

Yes your ageing decrepit arthritic 36 year old hands lol come on dude

This is beautiful. Mine is what I would describe as "aesthetically displeasing, but operational". :D

This is still a thing of beauty.

Love it. The only modding I've ever done revolved around the early Dreamcast controllers, the triggers use to break their hinges really easy and being pissed about the £60 cost for a new Japanese pad every couple of weeks I thought I'd give it a go. My solution was to strip the plastic from a connector block and cut into quarters then glue into the broken trigger, line up and heat up a sewing pin and ram it through hinge into the upper casing making a new hinge. Probably made a couple of hundred quid doing this in the day charging £5 per trigger for a local but now long gone import store.

Wow, you did great there, those B,G,H,I and A points are quite a challenge to get right. Only criticism I have is your method of melting the conductor of off the wire to solder it down, but it's still a functional method so it's all good.

Awesome video!!! One question: which kind of cable do you use in this video? 30AWG wrapping?

Just in time Voultar, I am about to order a few of this modbos for a special project on PS2 slim and I was looking around for inspiration for chip placing, I must admit I stole a few techniques from you in the past few months and the no clean is now a must have around, something good came out of the doujin dance work after all.

you're right - this is art. it's glorious.

Very best. Im looking forward to making this myself in a few 20 years.

Been watching your channel for a while even though I have no idea what is REALLY the purpose for the mods, could you explain what this particular modding does to the ps2?

@SuperPoopatron

4 жыл бұрын

Probably makes it region free and/or makes it compatible with burnt discs

Makes me want to bust out my old Hakko 935. Back in the day it was several hundred Matrix Infinity mods for PS2 in my 8 years doing it. Also short wire but crosswire as well. I know there's worry about signal interference but never had any issues. Nice job!

Is that retrorgb on the guitar? :D

dam man old school chills, tip tho when you get shaky take a 5 min break drink some water and proceed it gives you more precision

@johnchalinder6682

6 жыл бұрын

5 min break and a bit of dank and a beer do it for me

OMG amazing solder job! Well done :)

Jinn was the shit and one of the coolest moders to learn from I miss talking to him on the isozone. :(

@richardw4229

6 жыл бұрын

64ddking from what I remember he had a lot of stuff going on in his personal life and he was talking a break from it which I wished the best of luck for him.

You inspired me to give this a try, not the super short method though. After 4 hours, im happy to report it was a success.

Man I love this channel!!!

Now that's real passion. Just awesome

Should have shown a real challenge, mod a V1 - V3 console! :D I used to do V5+ fats all the time, once you get used to it it was easy stuff. Did a lot of repair work on consoles from competition that used ACID FLUX... ate through traces and all sorts. Ugh. But I will say I did use a few dabs of hot glue to hold the wires in place, but never anywhere near the chips, just on the board away from components to fix wires where I wanted them to stay routed rather than getting under screws for re-assembly. I originally used wire wrap wire, but found that wasn't fine enough for the V1 - V3 consoles. Moved onto 36 AWG varnished magnet wire. Was a pleasure to work with, no need to use strippers, just burned the varnish off where I needed to make the connection.

@Voultar

6 жыл бұрын

I'm the guy who came up with the diagrams for doing a V1-V3 installation for all Modbo/Matrix Infinity versions :-) - i62.tinypic.com/oj0y87.jpg

@shepd3

6 жыл бұрын

Awesome stuff dude! I remember having to double up on my eye loupes to be able to see where I was soldering on those... hated doing that, ended up burning my nose more with the iron than once!

What do you use to strip kynar? looks like you strip it with heat. Great video and you've skills man!

Love your videos, amazing skills 👌

wow...this dude did a pro job with the wires. made it look super neat like it was supposed to be there from the factory lol. mine would look like a 5th graders science experiment with a mess of wires all over the place... but hey, if it works it works... just put the cover on and no1 knows the difference lol

I always prefered the wrap wire, for doing mods. The slightly stiff wire helped it get through vias and under pins and such. I think if I were going to start today, I would use silicone wire since it is so easy to strip. Just grab with two fingernails and pull. Pop. Comes right off. Might not stick to the superglue though...

Is there a difference between the orange and blue ps2

Great video buddy! I was always curious what you used to keep the wires all bunched together in those circular patterns.

@noodohs

6 жыл бұрын

I'm a little sad to find out it is super glue after all the time he spends chastising people for using epoxy. I would not put super glue anywhere near electronics, but maybe that's just me.

@Voultar

6 жыл бұрын

I'm not super gluing joints, I'm not super-gluing to the main-board, I'm super-gluing a wire grouping to keep them close to the board and intact. Non-conductive, BTW. :-)

@noodohs

6 жыл бұрын

True, but I'd still be wary of having it seep onto the circuit board. Real pain to get off and very likely to wreck something. I'd want to glue the cables before installing them or at least put some protection between them and the circuit. Still, neat idea for a sort of DIY cable. Out of curiosity, why did you wrap them around like that in the first place instead of going straight from point to point? Looks cool for sure, but I'd think you could get even shorter wires going direct.

@Voultar

6 жыл бұрын

noodohs Super Glue is much easier to remove than epoxy or hot glue and is non-conductive so it isn't going to wreck anything. Coating the conductors is completely harmless. The BIOS signals are sensitive, I "whirl" them around in a uniform grouping to keep them from ever crossing each other. Notice with my method the BIOS wires never cross and line up perfectly with the chip. If you want to see a better example Google "Voultar PS2"

@noodohs

6 жыл бұрын

Voultar Epoxy sure, hot glue is usually pretty easy to peel off in my experience. Looks like you usually need acetone to remove super glues, which I know will at least melt plastics. So that is why I'm wary of it. I've worked with super glue plenty when it comes to woodworking, but not electronics.

I've got nervous just by watching this. Nice job.

When soldering the white wires at the beginning, what is the reasoning behind not using the extra pads literally right by the chip where it would be not only easier, but cleaner (i.e. leaves the chip untouched on that side)? Is there that much of a possibility of interference with conductors that are a few centimeters longer? Either way they are routed above the chip itself, so I cannot see interference being an issue any more so than how it was done in the video.

Thanks so much for this. Your the man!

It's good to know that I'm not a complete idiot for stripping wires with my iron like that. I was worried that might've been a really bad idea but it kept working so I kept doing it.

@Voultar

6 жыл бұрын

Absolutely. If that were real Kynar it would have been much, much easier.

@NSHG

6 жыл бұрын

I must be the only one who felt scared of that big soldering iron tip you had in the video. Truth is, I am doing my installs with a cheap (although brand new, and not heavily used) 30W chinese soldering iron, and I'm used to having the tip pretty sharp (it's a sharper than the one in the video) so that might actually explain why. Great install though, looking forward doing two of these as well, one's a silver 50003 and the other is a 90004. It's surely going to be fun :)

@alexatkin

6 жыл бұрын

The only reasons its a bad idea is its usually easier to strip and tin the wire, you won't need to apply as much heat so less likely to kill the chip or lift the pad off the board. That and you will ruin the iron tip melting stuff with it. I suck at soldering so really can't complain, but melting would be expensive (replacing tips all the time) and is generally just considered unprofessional.

@rodmongodwood

6 жыл бұрын

just because u saw it on the internet doesn't mean its a good idea ;)

@BobofWOGGLE

6 жыл бұрын

Coming back here after doing a couple more PS2s, maybe I'm just a savant or something but these things aren't that hard. Like most soldering, it's all about good habits and good tools. Keep your iron clean and your work well fluxed and there won't be much for difficulty. Alex Atkin I'm gonna be honest, if a little insulation ruins your tip, that tip was bad anyway.

Instructions not clear, I'm now part human part PS2

Jeeze, I forgot how many screws went into that thing's assembly. That said, when doing modding, are there any good uses for hot glue? I figure at best to secure/route wires (not to cover the solder joints, as long as the wires don't have a way to wiggle, the joints will hold fine). There's also that fun felt tape they use in OEM wire securing such as the PSP, etc, which allows for a more professional looking job, but that can wear out over time.

Its like bilbo imparting his stories and wisdom onto frodo

I miss the days of working at places like SCI, Sanmina, SNC and staying after work to do stuff like this using an inspection scope and a hot air station I couldn't afford myself. I had an Engineer come in one night and I was like "Ohh shit, I'm busted" He came over and asked what i was doing. I kind of said I was fixing something of my own. Amd he said, is that one of those "Fixes" that lets you play backup? And I was like "Yeah 😬" And he's just says "Cool, would you do my son's, he's been bugging me about it and I don't have the patience for it" I mush have looked very relieved. He just kind of smiled and said "Man I'm not going to say anything to anybody, Your boss wouldn't care anyway, he knows y'all work on personal stuff sometimes. It's one of the perks of the job. As long as you aren't abusing it you're good.

Way did you not use the test pads when adding the wires?

Voultar, I know this is a year old, but I watch all of your videos, because it's truly intriguing. I don't own anything, but an Xbox One X (I've owned an Xbox, 360, 360 Halo 3, Xbox One, Xbox One Halo & current Xbox One X. I trade them in, I don't keep any of them), never had a PlayStation, did have an NES, SNES & N64. Anyways my question is I never have a clue what the mods you're doing actually accomplish. Take this video for example, what was the purpose of all this hard work? Thank you for your time &the awesome videos!

Hey im looking to try my hand at modding of this nature, are there any good resources for what kind of mods are there out there for the ps2?

Nice looking workmanship.

At 7:10, why did you choose to solder directly to the chip, versus the pads below that lead to the same pins? Is there a difference? (Serious question. Curious for my own knowledge when I attempt this same install)

@jetsonian

6 жыл бұрын

I had the same question when watching the video.

@ToddsNerdCave

6 жыл бұрын

My guess is soldering direct to chip keeps the wires shorter and neater.

@Voultar

6 жыл бұрын

There are no pads to solder to. With the exception of the signal to the far left. The only other location to grab those signals is on the back of the board. And plus, I haven't done this in a few years, the point was to exercise some old skills. :-P

@Kippykip

6 жыл бұрын

Yeah wondering about this too, some of them don't have pads to solder but all the ones needed for the mod have pads, on that one side anyway. I'm also thinking about doing this mod.

@alexatkin

6 жыл бұрын

He literally said at the end he prefers the short-wire method.

This is literally an art you're not wrong.

7:03 what are those white cables called? When ever I buy wires like that its just a bunch of thin copper wires in insulation. That seems to have one single silver piece of cable inside which looks pretty good.

What's the song? It's some solid shit.

@djbadboon

6 жыл бұрын

As soon as I recognized it I went nuts. Great game and great soundtrack

Metal Squad from Thunder Force IV. I love it!

I kind of want to show off the soldering job I did on a slim in about 2004 but I'm afraid to take apart my slim as the wiring job was... amateur! I pulled it off but I bet it's a rat's nest in there. I probably made it as short as I could. I also used a tiny dot of hot snot here and there to hold the wire groupings down. Took SO LONG but it was worth it for the feeling of success of pulling off such a touchy mod. Amateur job or not its so fun to mod consoles. Almost more fun than playing them.

Do the latter days saints really prefer super glue on the bios chip over a little blob of hot glue on the wires? But thanks for showing this video. I am struggling myself a bit with clear wiring.

@theencube5379

5 жыл бұрын

they do because they dissaggree with hot caffinated beverages and glue (when inhaled) contains a lot of caffine and the bios chips gets and slightly melting the glue so the player can get a bit of a caffine buzz. However they do not strictly forbid hot glue on the bios chip (you will still be eligible for preist hood) but they wish you avoid using hot glue.

I replace the power board on mine and the power bottom 12pin flex cable, and still no power is coming on? The model is 50001/N. Any idea what else it could be wrong??

Beautiful. Congrats

Well havimg modded these before..... All I will say is respect.

Could not you use magnet wire? When I modded ps1 I used magnet wire I don't had mod wire. Ps1 mod is much simpler i know. But it looked nice.

@habiks

5 жыл бұрын

You should use magnet wire.. the wire he used is ultra shitty.

@OtherDalfite

5 жыл бұрын

Since it's low voltage low current CPU communication traces magnet wire would work fine but may not be as aesthetically pleasing as the white wire

What are the different mod chips you can get and what do they do?

these mod and soldering is good for us that are electronic engineers. work of art. If it was for my console, I would go either overboard designing and using custom pcb with the mod chips for super looks (no-one could see , but I would know :D ) or just a the fastest thing :P but fuctional

Mother of god. My ocd has been cured.Godlike job with the wiring.

I never could do that. Great job.

man, i remember installing the modchip in my v5. pain in the backside and took forever compared to every other modchip i've installed.

Anyone know what brand conductors he uses? I can tell these are 30 or 32 solid core with pvc jacket. All the brands I test never separate from each other properly. Great wiring man.

Hell yes for heavy metal and console mods...

back then in my country, I enjoyed doing that kind of artistic modification, however, when some chips decide to damage the ps2 (modbos, magic 3 and 5 and M7 chips), I no longer install them like that anymore, because the superglue tends to tear traces. Very impressive work!

@SianaGearz

6 жыл бұрын

Why? If removal/reversal is needed, just give it a couple drops of pure acetone to dissolve CA glue. It shouldn't do any damage in storage, that would be weird - don't see how CA glue could shrink or anything.

I guess when you get to the newer consoles the architecture gets properly convoluted and more and more difficult to mod. Is the slim PS2 any more difficult or easier to mod?

@richardw4229

6 жыл бұрын

Mellow Gaming from my time playing with them they can be a pain in the but your first time around so I would say try phat.

This was more an art then a skill. 👍🏻

What kind of wire are you using and where did you buy it? I like the solid AWG 30 or 34 that you’re using. Thanks!!

@Voultar

4 жыл бұрын

Yo Harry! It's just cheap 'ole 30AWG wire wrapping conductors. Have a look here for ALL of the stuff that I use! www.amazon.com/shop/voultar

can someone recommend me a decent flux to do this type of thing in future?

Looks really neat, but that reset wire looks to be under way too much tension.

What type of wires are you using?

I'm having veitnam flashbacks of when i tried soldering a modbo to my ps2 fun times, giant wires. Ended up breaking it. No video when i first booted, desoldered. Flashed green, pop noise, right back to red. Now it doesn't turn on at all, 5+ ripped pads.

very beautiful and neatly done, but doing it with your eyes only is probably impossible can you tell me what does this chip do? (it only allows you to play burned games from backups or something else?) If I could solder like you do without destroying everything on my path that would be great but my shitty eyes betray me everytime

I’d just like to learn or understand how to solder the ps2 fan connector back to the board that I accidentally ripped off

Good Old days of modchipping the Glorious PS2

Hi... Awesome Video... But I have a question... The wires are the same at the modbo 5.0?? I cant find anything about them. Thx f. help

Hey Voultar, I always wonder: How fo you choose the gauge of wire to use?

@Penfold8

6 жыл бұрын

Generally speaking he used wrapping wire for signal connections (30 awg) and a little beefier for power and ground like 26 -28 awg.

@mrlithium69

6 жыл бұрын

stick to 28. Then go up or down as needed.

its that simple. I used to do og xbox's they were pretty simple but never would do a ps2 except the hdd osd softmod. Ps2s are a pain in the ass. Didnt they a half decent no soldier solution for ps2 at one point? Nice music choice.

@JonathanDeane

6 жыл бұрын

I tried doing one of those early 2 or 4 wire mod chips, broke my launch PS2 trying it, after that I got a flip top with swap magic, eventually I switched to loading off the hard drive and network adapter. Now I have free MC Boot bypassing the optical drive all together (my V7 PS2's are all having odd disk read errors now) Wii chips where easier to install with that Wii Key (I successfully installed at least 5 of them) but then soft mod. I have some home tricks for these tight solders that helped me on the Wii but anymore it seems like soft mods are less risky.

@narshe223

6 жыл бұрын

What is the music from? I recognize it but can't place it.

@h1ghju1ce

6 жыл бұрын

Yup the dms4 e.z.i. , bought one, never managed to get it to work :-(

So I've red most of the comments and didn't find my answer. 1) what kind of wire is that? 2) what type of flux are you using?

With how tiny those wires are I am sure IDE ribbon cable pared to width and trimmed to length would do equally as well. The only caveat is the necessity to fold the cable rather than curve it.