That Homer Simpson voice clip at the start had me really confused while I was trying to find what was making the noise! Amazing video as always, thank you for the entertainment!

@fevermusicstudio9941

5 жыл бұрын

I hear Homer throughout the video....

@CreeperInDisguise

5 жыл бұрын

@@fevermusicstudio9941 Yea, it's just the one at the beginning was the one that confused me!

@bobsbrain_

5 жыл бұрын

same

@limerickman8512

5 жыл бұрын

I knew recognised the voice, but could not place it until I hear it again several times later in the video. I originally thought he was play acting and talking over with his normal voice, but instead he was play acted with homer voice, poking fun with the bed.

@wolfgtweb

5 жыл бұрын

Same here. I had music playing in the other room while I watched this video. And when the sound clip played the first time, it was while he was talking. I actually stopped the video because I thought someone was talking outside my house.

Bed goes up. Bed goes down

@infillion7177

5 жыл бұрын

Not everyone can afford a voice controlled cnc table

@alessandrosilenzi

5 жыл бұрын

Can't explain it

@dhengen

5 жыл бұрын

this brought me so much joy

@kamiochambless2590

5 жыл бұрын

It would be great if there was some way to make the table trigger a recording of "Bed Goes Up" and "Bed Goes Down" when it's raised and lowered.

@AdityaMehendale

5 жыл бұрын

Cloud goes up, cloud goes down! -HoSi

Your stop motion skills are great!

Speaking for all the "Tubers" we REALLY appreciate the time and effort you put not only into your projects but the editing time you put into your videos. Clearly they are at the very top of KZread. Thanks Frank! !! !!!

@GrahamDIY

5 жыл бұрын

You don’t speak for everyone.

@Sebastopolmark

5 жыл бұрын

@@GrahamDIY NO just 99.99% of the people who appreciate what Frank does. Apparently you are the .01% of the people who do not. To bad for you

I always love those „at this point I thought ...“ moments. Part suspense, part game show it makes me want to find out what will be re-done. thank you again from germany

Like! Fighting the temptation to be jealous. I understand that what Mr. Howarth has is not only a shop full of useful tooling and materials, but the skills to design, use and maintain it all. CNC sounds great, even if you can afford it, but then there's the learning to get it to do what you want. This guy makes it look much easier than it likely is. Once again, sir... thank you for sharing.

I'm sure this space doesn't have everything Frank would want but it's shop heaven to me. The synergy between the tools is fun to watch... making parts needed with other tools. I get lots of ideas watching this kindred spirit at work.

Well that was a very elegant yet simple solution to moving the vertical spoil board up and down. Very nice.

Video goes up, I press like

@ingmagination

5 жыл бұрын

No, it's the bed, no table, that goes up

A few suggestions. 1. Use nylon bolts to hold the spoilboard to the frame. If you do go too deep and hit one you don't ruin a bit. 2. Cut an entrance/exit hole on both ends of the T-slots so you can add more clamps if necessary without moving the workpiece if its covering one end of the slot. 3. Get a cheap horizontal bandsaw from Grizzly, Harbor Freight, or Craigslist for cutting threaded rod and other metal pieces. After a couple of projects you'll wonder why you didn't get one years ago. 4. Check with a lumberyard that supplies cabinet shops and see if you can get 1" MDF for the spoilboards. It will be better quality than big box store MDF, stiffer, and you can resurface it several more times before you spend the time replacing it. 5. Build the storage under the table on the frame itself and put a bunch of heavy stuff in there. It will help stabilize the frame. Some large gussets on the corners wouldn't hurt either.

I've been binge watching your videos for a week now, I'm no woodworker nor will I ever be, but I find it hypnotizing to watch people create nice things. What amazes me every time is not only the stuff you make, but the planning that must have taken place for the shots and the angles of the camera. Thank you. It's been a lovely week. Although I'm already having withdrawal symptoms.

I don’t understand how the public hasn’t caught on to the premium product that is produced on this channel. This channel should have millions of subscribers. I could watch this channel uninterrupted for hours straight. The precision, attention to detail, and creativity is like none other. Keep up the good work, Frank! I’ll follow you the whole way!!

LOVED the stop motion! It’s an art form all in itself. Great job Frank.

These videos are never long enough. 😡 I could watch these videos all day.

I laughed when you said that piece “can be a dumb rectangle”. I can relate to that fo sure. If it’s not complicated, it doesn’t show off my EXTREME INTELLECT! Gosh!

Your stop motion always makes me smile!

Cutting bolts: screw a nut onto it before cutting, then remove it.

@naybobdenod

5 жыл бұрын

Martin. They say that simple solutions are the best, and yours is the best. Not many will admit to not knowing this trick. but I will. Cheers. Regards from the UK John.

@cpad007

5 жыл бұрын

Being all-thread, it can be screwed on any time. :) Better than a nut, however, is a die...if you have the right size.

@centurion726

5 жыл бұрын

I use to do the same and grind the cut area a little so it wasn't as sharp anymore and then back the nut off.

@frankmakes

5 жыл бұрын

Good Idea

@paulkolodner2445

5 жыл бұрын

I can't resist describing my technique for doing this: 1. Thread two nuts onto the rod and tighten them together. 2. Thread a third nut onto the rod some distance away. Now you have two flat points that you can clamp in a vise, and the rod won't move or rotate when you cut it. 3. Cut the rod. 4. File the cut end flat to get rid of the ratty burr, and then chamfer with a file. That will keep any stray metal bits from getting in the way of a new nut. 5. Now remove all the nuts. They'll clean up the threads on their way off the end.

I enjoy listening to your thought process. With your videos, it's often less about 'how to do' and more about 'how to think'.

May I give some sugestions ? ☺ 1) Use some metal washerss between the bolts and the waste bed. More clampingforce and less risk to go into the bed with the bolts. 2) Use, for example, a rubber band to force the locking device/bar into the teeth of the arc. In the top position the gravity doesn't help (as much) to let the teeth fall in position. Looking forward to your next video! 👍😃

@AlfredLarsson

5 жыл бұрын

2) Yes, it might vibrate and fall down a step.

@fadetounforgiven

5 жыл бұрын

What I would suggest is making it with triangle-like shapes instead of rounded. That rubber band would also help anyway, if only for peace of mind, but I think it would work better. Also, I would have written on both sides some kind of "angle-scale" system, so when the board is not used flat or 90º it would take no time to know what angle it is. Other than that, great project.

@21Blankenship

5 жыл бұрын

Washers 100%, was surprised he didn’t use them

@frankmakes

5 жыл бұрын

@@fadetounforgiven I thought alot about scoring an angle guide into the arcs. I decided they would not be very accurate until I got it together. Having the guide read 46.7 degrees and the angle being that would be unlikely. I think It might be more useful to mark and take notes on the arcs for particular projects.

@Mrcaffinebean

5 жыл бұрын

Guust if you use a washer, you loose the adjustability that the slot gives you.

Your videos blow my mind every time, Frank. Thank you.

I'll tell ya...If I ever had crazy money to build a house and any gadget I wanted, you and Samurai Carpenter would be under contract! Great work...

Well thanks a bunch Frank. Homer is now everywhere in my shop...blade goes up, router goes down, bandsaw guides go up, drill press goes down, router lift goes up, chop saw goes down....then my wife walks in and asks 'hows things going today?'...'aw, up and down', i reply : )

I really appreciate your commitment to the "bed goes up/down" joke. Thanks, Frank.

On your all thread run a nut on it past were you want to cut it at , cut it , then take your nut off. That usually forms the thread again . And once again another awesome video Frank .

I'm not worthy to comment on frank makes videos but I will anyway. When you cut threaded stock run a nut onto the stock behind your cut, then cut, then run the nut back off. The nut will clean up your threads for you. For extra credit chamfer the cut end first. I learned that from a 4th gen. Oil field guy. High school dropout incidentally. Love the evoulution of the cnc frank, keep it up.

It never ceases to amaze me how your brain works. I am very much in awe of your talent.

Only draw back I can see to the ratcheting system for the table is dialing in an exact angle. Your limited to its stops but i guess you could just clamp the table if you need to be in between stops for whatever angle. Great video as usual Frank.

Man, I hate when an overcomplicated design gets beat out by a simpler, better one, too, but your stop-motion and multiple exposure editing makes this one a gem, Frank!

Homer was a huge help on this build.

When cutting a thread make sure to put a nut on the thread. You can then take the burr of the cut off by driving the nut over the freshly cut end of the thread. This will make it easier to clean up the cut.

@GrahamDIY

5 жыл бұрын

No offence but everyone watching this video knows that. Everyone.

@dien2no423

4 жыл бұрын

another solution to "clean threads" when cutting with a hacksaw, for example, is to light touch up the end on a grinder, and magically the threads are deburred and easy to thread nuts.

It's always a great day when I see Frank in my sub box. I think I smile at the end of every video. Thanks Frank

This is worth watching for the stop-motion alone, in addition to the great content!

Frank; du hast eine traumhafte Werkstatt! Ich gratuliere dir!

you're an absolute genius frank, constantly inspire me to be creative to solve solutions or problems. not only in my woodworking but my life

You could integrate your 4th axis with your bowl holding lathe jaws to index the workpiece rotation. I like the simplicity of the angle stops. This makes angle repeatable without a lot of fiddly measurement. A treat to watch your work as always, thank you Frank.

I love your animations. Your design concepts, the execution, the skill: those things are wonderful. But those animations add an element that really sets your work apart. Thanks again

Love the Stop motion video. You obviously love what you do. Thanks for sharing.

interesting video, to help save the threads when cutting them to length, thread nuts onto the rod either side of the intended cut. When the cut is complete, run the nuts over the cut end and it will help restore the threads on the rod.

It's always nice to have a friend drop by to help clean up the shop....

The cnc lathe looks awesome!

first of all: I really do love your videos! your style, the editing and the fact that you show your “mistakes” just makes it all way more enjoyable for me to watch. when cutting one of those threaded rods it is a helpful trick to have one nut on the side of the rod that you want to use. after you made the cut you just use a wrench to move the nut over the cut-area (sorry I am “nut” a native speaker). this will help to re-do the threads on the threaded rod. I wish you a lot of fun with your new vertical CNC table! Hopefully, we will see it in many new videos ;) Greetings from Germany!

I am very impressed at your editing and post-production work and the fact that you do it all yourself as well as make stuff.

tip, something i saw on a metal working channel ... when cutting threaded rod, but a bold on the rod before cutting, undoing that bolt over the cut will clean up the threads

Dude. Bed goes up, bed goes down. I didn’t think I could love your channel more 😂 Kudos!

I love your craftsmanship - both what you build and your videos. Man, you must spend a lot of time editing. Also, Homer Simpson!!! Loved it!

Wow! Genius, as always. I really enjoy watching you sort out these challenges. Was also so confused by the Homer voice... great touch! 🤣

Everything you do is awesome! from your video editing to your woodworking skills. You are my hero!

Glad you mentioned the fourth axis in the video... I was about to go searching for the video I missed :-)

Finally! I get to see what their rotary table looks like! I can't wait to see it in action!!

I love your videos! I was almost all 2018 in a hospital and without internet, I went in and out several times to the hospital and only for a few days I stayed at home (once it was just a day at home) and the few things I wanted to do when I was home. If you had a new video and savor it to the fullest. Thank you very much indeed, you were very helpful. I'm almost 3 months old at home and already healthy, just trying to return to my "normal" life (which is not easy) A big Thank you for all your videos, for me, they are very helpful👍👋 Greetings from Mexico I use the google translator for translation haha, I put it in Spanish in case you have a better translator me encantan tus vídeos!!! estuve casi todo el 2018 en un hopital y sin internet, entre y sali varias veces al hospital y solo por algunos dias permanecia en casa (una vez solo fue un dia en casa) y las pocas cosas que queria hacer cuando estava en casa hera ver si tenias un nuevo video y saborearlo a tope. muchas gracias en verdad fuiste de mucha ayuda. ya casi cumplo 3 meses en casa y ya Sano, solo tratando de regresar a mi vida "normal" (cosa que no es facil) Un gran Gracias por todos tus videos, para mi, son de mucha ayuda👍👋 Saludos desde Mexico

Wow, you must really like making videos, the dedication in making stop motions and animation is amazing. Keep up the good work.

Thought that went into this, along with everything else you've done, never ceases to amaze me.

Building advanced rolling to realize design. Bravo! And inspiring.

Nice work. The little ratchity bit is called a pawl as in rack and pawl.

@paulkolodner2445

5 жыл бұрын

"Who are you calling a little rachity bit ?" - Paul

Frank, you are the MASTER at cutting sheet goods! Also, love the Homer voice in the background.

Man your engineering skills are phenomenal

I'm excited to see you use this new setup

It es allready two years since you installed the new CNC ... wow ... crazy how time flies ... cheers from germany, Arne from #kreith32

@jonkreuzi2082

5 жыл бұрын

Ach der der Arne isch auch hier. Servus

It's always nice to see your identical twin show up to help.

Never ceases to amaze me when people use tools to produce parts and pieces to use with those tools. Stuff like the table bed here and 3D printing accessories for printers, love it! Ps. Ever gonna dabble with 3d printing?

Frank you really are an amazing man. You workshop is stunning.

you're an absolute genius frank, constantly inspire me to be creative to solve solutions or problems. not only in my woodworking but my life :')

Great solution, great execution, great video! :-)

@i.bcraftsman5977

3 жыл бұрын

Jeremy we are waiting for ur CNC to come up

Perfect position to cut slot for a yarn bowl, great stuff as always Frank.

i am excited to see what you do with the addition.

My shop is smaller than your CNC 😂👍

@charlesmeyer7021

5 жыл бұрын

Hobbyschreiner Kreuzi same

@eviethekiwi7178

5 жыл бұрын

20 foot shipping container alright!

@stewiex

5 жыл бұрын

My shop is more non-existent than your shop!

@john-il6uk

5 жыл бұрын

lol right

@TakamiWoodshop

5 жыл бұрын

same

Cool as always, but lock your shop before “bed goes up” gets in there again! Frank, I’d add one complication to the ratchet: a spring or latch to keep it positively engaged during operations. Those round teeth don’t self-lock. It’d be a shame to lose a workpiece to vibration if the pawl jumps out and the table falls.

Nice work Frank, The only thing I have in mind is that the bowl should be rotatable without moving horizontal or vertical. For example if you want to write letters on it.

How does ANYONE give this a thumbs down! Brilliant as always Frank!

Love the mechanism you created to hold the bowl. Can't wait for the first time you get to use it!

I don't know which I admire most, the projects you produce of the tools you use to produce them. I would love to have a CNC machine. Only two things hold me back, space and money.

@1pcfred

5 жыл бұрын

Small CNC machines take up less space and cost less money. As a rule of thumb figure CNC costs about $100 a foot. You don't really get a volume break for a while either. Once I saw a vinyl cutter bigger than a basketball court. I should have asked them what it cost. The gantry on it was like 6 feet tall. Like it was that thick.

frank fantastic video especially the stop motion. Everyone has there own way of doing things. Mine would be to replace the vertical board making it a rigid part and make a sliding top so it slides towards your vertical board so when your not using the vertical just slides over giving you your extended horizontal workspace. " Subscribed "

That's it. Competition is over. Video of the year right here. Right in the first 20 seconds the faint homer simpson reference was amazing.

Frank you could put out a video making a PB&J and I would still be fasciated.

@doubledarefan

5 жыл бұрын

That would be another job for the CNC machine: Spreading PB and J on slices of bread laid out all over the table.

The lifting sounds like a roller coaster starting it's accent! Awesome setup!

Linear Actuators would be the best way to raise and lower the end of your table. You could also control these via a stand-alone computer or possible with your CNC software.

So nice of your twin helping you out there

Great content as always! I love the stop motion, it really is what separates your videos from the rest. The Homer Simpson is killing me. You the man Frank, keep it up!

Grinding a chamfer oh the rod after cutting really helps getting nuts started in the future.

In this episode Frank discovers the K. I. S. S. Principle You go Frank! Good Job!

Should have used washers with the bolts on the table never the less your still a genius! Will be needing your advice very soon.

Wow, can't imagine how long it took to get the stop action of all the waste pieces from the vertical table. Awesome job as always

Howard, Absolutely amazing design, build and Videography!

Simply Frank, well done as always.

You never cease to amaze. I'm always in awe of what you come up with!

Frank I enjoy your videos perhaps more then anyone other. I respect your intelligence and thoughtfulness and learn a great deal from you. I think this tilting section a great idea and aid but I have an observation. with the piano hinge being on the end of the MDF there is a possibility to hit it with the cutter head perhaps. If the hinge was flat on the bottom surface of the MDF then perhaps less likely to cause a problem.

@frankmakes

5 жыл бұрын

Thanks. I did not think of doing the hinge that way. That would work it would just be harder to install.

@simoncroatia

5 жыл бұрын

frank howarth I only thought of it because of the slots cut out in the old tabletop MDF sheet you replaced. Some of the cut lines seemed to go a little deeper. Didn’t mean to offend in any way.

This is my favorite channel on KZread.

loved the stopmotion bolts movement awesome

The fourth axis looks amazing!

Great episode, Frank. Really great.

Nice and simple solution! You could write the angle at the different increments as a way to quickly adjust the table :)

A little tip for when u are cuttin threaded rods, put on a nut before u cut and then when u have cut the rod u can back of the nut and fix the damaged threads

Can u please make a shop tour/tool collection where u show us every single one of your power tools, your clamps, all your power tools, your lathe accesories, all your power tools, everything else, and oh yeah your power tools.PLEASE

The video editing work @ 7:23 minutes is just awesome!!

I could be jealous of your CNC machine....but after watching this, it is obvious I don't have enough smarts to even set it up. Love your vids. table goes down DOH.

0:44 This shot must have taken forever ^^ I love the stop motion, nothing feels quite like it.

I can't wait to see the 4th axis I have the same machine and have been eyeballing the 4th axis also.

You always make the coolest stuff Frank.

Great video and amazing work 👍 also absolutely love the homer bed goes go and down. Keep up the great work

I'm surprised you didn't put precision angle marks on your arcs! Great video.