Great video sir. Speedo in my 1967 vw bug is broken soon after it was replaced by my electrician. Now i want to fix it myself. You taught me a lot on how a speedo works. Thank you very much.

@GrandadIsAnOldMan

6 жыл бұрын

Good luck with that and thanks for watching

Thanku for explaining this

Thank you sir this video just told me everything i wanted to know on speedometers

@Ham549

Жыл бұрын

There is a way to do it 100% mechanically without any magnets or electrical inductance.

thank u so much, very well explained. I want to know that, is that spring who stops the needle at certain limit avoiding the needle to rotate? (just like the disk was rotating because no spring there.)

@GrandadIsAnOldMan

6 жыл бұрын

Without the spring to stop it that disk would spin round continuously. With the spring in place the further the spring is twisted the more it resists the turn so the amount it rotates is proportional to the speed of the magnet spinning.

@mudassirnaseem6111

6 жыл бұрын

thanks

you are the best. great explanation...

@GrandadIsAnOldMan

7 жыл бұрын

Thank you 😊

Perfect explanation bro... Thnq

@GrandadIsAnOldMan

4 жыл бұрын

Thank you

Awesome video, thank you . I’m trying to rebuild an old rusty Honda speedometer

@GrandadIsAnOldMan

Жыл бұрын

Good luck!

Thank you very much sir, good explanation, i have never got this. 🙏🙏🙏🙏

@GrandadIsAnOldMan

3 жыл бұрын

Thank you for watching and commenting 😁👍

Sir i have a maruti swift 2017, it,s speedometer is not working, in this vehicle where sitting the സ്പീഡോമീറ്റർ sencer

good video, thank you

I had to do this with my 944's speedo to fix the trip odo..

At 8:55 I noticed that the disk to which the needle is connected to only moves a certain distance then stops. However, in the example you showed us, the disk rotated a full 360 degrees. Do you have any idea why that happened? I think that it has to do with the weight distribution of the disk but I don't know if that's correct.

@GrandadIsAnOldMan

3 жыл бұрын

I am not sure what you are looking at. The cup that the needle is attached to does not rotate 360 degrees. It is rigidly attached to the needle and you don't see the needle spinning round 360 degrees do you?

@shokobata

3 жыл бұрын

@@GrandadIsAnOldMan Ya exactly! My question is: why it doesn't rotate 360 degrees like in your demonstration? It only goes to a certain point then requires more speed to turn further.

@GrandadIsAnOldMan

3 жыл бұрын

@@shokobata what demonstration shows it turning 360 degrees?

@GrandadIsAnOldMan

3 жыл бұрын

@@shokobata do you mean the metal disk I have suspended on the wooden frame? The cup in the speedometer with the needle attached is turning against the spring to give it resistance. That is why it needs more speed to turn further. You can see the spring at 04:19 if you look carefully. It is a flat spiral coil. I tell you about it at that point.

@shokobata

3 жыл бұрын

@@GrandadIsAnOldMan Thank you! That is what I need to know. Sorry for not replying earlier.

Thank you so much!!!

@GrandadIsAnOldMan

3 жыл бұрын

Thank you for watching

Sir i have one speedo meter of suzuki swish 125 ,the problem is the cable rested and fixed inside the rotating part of the meter ,any idea to remove

@GrandadIsAnOldMan

5 жыл бұрын

I can only suggest using penetrating oil to release it over a period of time.

Thank you sir

@GrandadIsAnOldMan

4 жыл бұрын

Thank you for watching 👍

Thanks

@GrandadIsAnOldMan

3 жыл бұрын

👍

Thanks ! And I have a doubt , if I add a small weight say 5 gram , will it affect its spindle rotation??

@GrandadIsAnOldMan

3 жыл бұрын

Probably

@harshwinder2325

3 жыл бұрын

@@GrandadIsAnOldManokayy ! thank you ☺️

The needle jerks while accelerating 0-45km after that it's quite normal. Would like to know any method to fix it. Thanks

@GrandadIsAnOldMan

5 жыл бұрын

I remember years ago having a problem with the speedo on my motorbike and that was the cable was frayed at one end and dragging in the sheathing.

@club4siraj

5 жыл бұрын

I had this issue before replacing my cables. And recently i went on for a replacement of speedometer drive gear&pin. Now both the cables and gears are good as new.

what is spring in the speedo meter problem

@GrandadIsAnOldMan

6 жыл бұрын

I am not sure if this is the answer to your question. Jump to 05:28 and you can see the coil spring clearly. The drive from the motor or wheel spins a magnet. The magnetic field causes the cup attached to the speedo needle to spin. To stop it spinning right round it is attached to a spring so it is the torsion of the spring that determines how far the speedo needle will move compared to how fast the car or bike is moving.

I have a same speedometer and its needle vibrates when meter runs, can you elaborate the issue?

@GrandadIsAnOldMan

Жыл бұрын

Nope, sorry. I just took it apart to look inside.

Very good way

@GrandadIsAnOldMan

2 жыл бұрын

👍

Sir my car omni ven 2014 model . Temperature cage working & fuel cage working. But speed cage and km number not working. Chenges metirial neme sir

@GrandadIsAnOldMan

2 жыл бұрын

The temperature gauge and fuel gauge will be electrical, so your power is OK. The speed gauge and km will be mechanical. So I would guess your Bowden cable is broken. That is the flexible metal cable that goes from your gearbox or wheel into the back of the speedometer assembly.

how does an analog tachometer works spark plug signals, there are so many on after market.

@GrandadIsAnOldMan

3 жыл бұрын

I guess you will have to research that to find an answer. Maybe Google it.

Thank you for make a video

@GrandadIsAnOldMan

3 жыл бұрын

Glad it was helpful 👍

There is an easy method to reset the odo... Just remove the clip near the plastic gear and rotate the nos.. It's all set to zero..

@GrandadIsAnOldMan

3 жыл бұрын

If that is what you want to do. I was more interested in the way it uses a magnetic drive 😁👍

I am not able to remove the needle on my speedometer. It seems glued permanently.

@GrandadIsAnOldMan

3 жыл бұрын

Why do you need to remove the needle?

Speedometer is locked its not rotating please suggest any idea

@GrandadIsAnOldMan

11 ай бұрын

Could be the speedo cable is broken

What bike is the spedo off?

@GrandadIsAnOldMan

2 жыл бұрын

As it says on the front of it - it came from an EVT Scooter

@GrandadIsAnOldMan

2 жыл бұрын

Here is the scooter kzread.info/dash/bejne/iI2XuayYqMuafM4.html

Can you make a computer fan air cooler?

@GrandadIsAnOldMan

8 жыл бұрын

+Mattson McCraw if you mean a computer fan attached to a bucket full of ice, then the answer is yes I could make one but no I am not going to. There are several videos on that subject on KZread already and it is very rare that it is hot enough here to justify me making one.

hello meray Honda 125 ka speedometer nedel theak kam nai kr rahi matlib agar me 40km speed pr hu to nedel 60 kay kareb jay ga. help me

@GrandadIsAnOldMan

6 жыл бұрын

Sorry I do not know how you would adjust it. I would guess it would be something to do with the tension of that coil spring.

Yes but u have to show how it indicates diffetent speeds.........

@GrandadIsAnOldMan

4 жыл бұрын

The needle indicates the speed or did you miss that?

bajaj ct 100 ka spedomitar sahi karna hai

@GrandadIsAnOldMan

6 жыл бұрын

Sorry Google Translate does not help me here, I do not understand.

An account economic revolutions 8-)

P.O. Box? I have some old beat up toy cars and toys that I'm getting rid of and you seem like you may be interested

@GrandadIsAnOldMan

8 жыл бұрын

+theguydraws thanks very much for your kind offer but I am not set up to accept gifts or donations and I already have more than enough to keep me going way into the future. I regularly donate my stuff to the charity shops that I visit.

@thewhitebackground

8 жыл бұрын

ahh its cool, you seemed like theright guy, good to know you're cool

Hi

@GrandadIsAnOldMan

Жыл бұрын

Good afternoon

My odometer is running 10km for running my vechicle for 1km why is it so

@GrandadIsAnOldMan

4 ай бұрын

Possibly because you have the wrong odometer 🤔🤔 Does it register the correct speed? If it is exactly 10 times the correct value, it could be two of the gears driving the individual number rings are stuck together, maybe some dust or grit stuck between them.

@whiteunbox5978

4 ай бұрын

@@GrandadIsAnOldMan It is showing correct speed but odometer reading is too fast

@whiteunbox5978

4 ай бұрын

@@GrandadIsAnOldMan To be precise only for running 1km by odometer went from 63km to 71km

@GrandadIsAnOldMan

4 ай бұрын

Assuming yours is basically the same construction as the one in the video, you can see how the gear drive works. The drive for the odometer is geared off the same drive that spins up the speedo 08:55 so IF the speed registered is correct, then it must be the right set up for your vehicle. If it is spinning the number disks too fast then like I said, it must be that some of the number dials are jammed together and being dragged round. I assume you are not getting confused by the 10th of a Km number dial.@@whiteunbox5978

My Speedometer shows 50 kmpl and when i changed the speedometer it shows 60 kmpl . What should be the problem??

@GrandadIsAnOldMan

3 ай бұрын

Maybe it is the wrong speedometer for the bike.

@yogendrasinhparmar8626

3 ай бұрын

@@GrandadIsAnOldMan no it is the same speedometer

@GrandadIsAnOldMan

3 ай бұрын

@yogendrasinhparmar8626 In that case, you have a problem. The speedo will have been calibrated by the manufacturer to indicate the correct speed based on the rpm of the drive cable. The rpm of that cable is set by its gear linkages and is governed by the size of your wheels. Smaller wheels turn faster for the same speed on the road. They will have adjusted the tension of the detent spring to take this into account for the bike the speedo is designed to fit. You could try adjusting the tension of the detent spring, but as you have no way of calibrating it against a known speed, you will just be guessing and could make it worse.