Excellent video. I have a good mechanical mind but have never done tappet adjustments before. This video highlights perfectly how simple it really is once you have your head around it. Thanks! NOTE: Hope you all remember to do this every 7,500 miles as per the manual - Takes the edge off the naturally clattery Air/Oil cooled engine which helps me sleep at night lol

best tutorial on that bike i found so far im gonna do it today on my 1988 model year. wish me luck... its a beater bike i bought cheap and i dont think there was mantenance be done in the past 15000 miles

great video! should i ever attempt it, im gonna definitely refer to your very thorough video. great job bro! wish you would have done one on the carb adjustment....😕

@Fixnit14

7 жыл бұрын

+Eric Serrano was going too, but I used a different camera and the video was unusable. Next time maybe... 😉

your video us helping me right now, i have my 2001 katana opened up, but in confused on what you meant by intake and exhaust. i have no idea which ones are intake and exhaust after yohr explination. could you please link me to a sirvice manual or tell me which one is intake and which one is exhaust?

why not silicon the new cover seal in the grove on cover instead of on flat head and then trying to line it up. lucky it sealed.

Thanks for the awesome video! I was curious as to where you got the gaskets?

@Fixnit14

8 жыл бұрын

+Lyle Murphy most all my OEM parts I get from www.bikebandit.com They have some great prices on tires too.

Wish I had seen this before I rotated the engine the hard way pulling off the cover and turning the crank. 🤔 This is the first bike that the chain doesn't come off as well. I was going to drop it in my sonic cleaner. Pulled the tire, and what the h***, it is around the fork tube. I'm not taking all that apart....$%^@#&^* But the bent feeler gauges are well worth it for the adjusting. I broke down and got the adjuster wrench as well for that square head on ebay. Had to buy the oil wrench I will never use again since I went with the oil filter with the nut on it. What a shock the cylinder with the stutter also has the valve that was loose. Can't believe they call the bike white, when it is mostly blue. Gas tank color used to be the bike color.

God, this would take days for someone new to try and do without messing anything up. You took off almost everything. I cleaned the carbs in my 750 01 cat awhile ago, and was contemplating adjusting the valves while syncing the carb and changing the spark plugs, but after seeing this.... F that.

@Fixnit14

8 жыл бұрын

+Blaice it's a lot of stuff to take off but it's pretty easy and straight forward. It should only take about 3hr to do everything. Took me 6hr having to deal with camera angles and family drama.

@blaice7365

8 жыл бұрын

3hrs? No way. Maybe if you already possess all of the knowledge, but comprehending which is exhaust and intake, ordering all of the new seals, and taking off everything and putting it back together alone would take at least 4+ and I'd wager way more than that. I might still do it, but it'll take a long time.

@philhans7437

6 жыл бұрын

dude it is really not that hard at all

@philhans7437

6 жыл бұрын

im an idiot for replying to a year old comment. my apologies.

Hi did you loosen all adjusters without measuring before or did I see it wrong? Whatever,one suggestion from an old pro/greaser which makes the job far more easy. Take out the sparkplugs,then turn cylinderwise till the right tdc.Thats the one when the valves are all closed. Easy to see it while you do turn through both tdc's Then the camlobes of this cylinder dont touch a valve. Now you can measure every valve of the cylinder and correct it if necessary. greets Richard

I was wondering if this was a shim or a rocker type. Thanks for the video! Do you know if it is the same on the Bandit?

@laservlx

4 жыл бұрын

Some of the 600s were shims. But only a couple years. The rest and all the 750 were adjustable tappets.

HOLA AMIGO, DONDE PUEDO CONSEGUIR ESOS EMPAQUES?

i have the bike opened now and could really use your help

@Fixnit14

8 жыл бұрын

I confused my self there too bro... The valves at the front of the motor are exhaust, and the ones at the rear are intake. Front is closest to the handlebars. If you follow the illustration you'll be ok.

@Fixnit14

8 жыл бұрын

+Alex Nguyen let me know if you need any more help... ;)

@SojuSweet

8 жыл бұрын

+Fix-n-It phew!!! i did it and she runs better than ever!! your video on youtube was the ONLY video i found to help me out step by step! Thank you! photo of work= www.dropbox.com/s/f8fkmlm5rxdxkte/2016-05-30%2016.20.12.jpg?dl=0 i found that this manual goes in depth with how you adjust the valves with a nice picture. takes a couple times of reading the same paragraph to understand it but it totally made sense and worked! manual= suzukservicemanuals.com/suzuki-gsf400-gsf600-gsf650-gsf1200-gsf1250-service-repair-manuals/

@SojuSweet

8 жыл бұрын

+Alex Nguyen just took this photo of completed bike as i just finished a 30 min ride www.dropbox.com/s/pl9sw01tska0lp4/2016-05-26%2023.01.05.jpg?dl=0

@Fixnit14

8 жыл бұрын

+Alex Nguyen hey thanks for liking the video. be sure to share it with your friends and subscribe I have at at least one new video a month. be sure to check out my newest video.

Thanks for the video! Is there a website that sells a kit for this? All I'm finding are places I have to go down and select each gromet/gasket individually.

Your cylinder order at 10:10 is off it goes 1243 not 1234. Did you notice a difference after running the bike?

Can you please tell me my bike rpm is not stable when i increase a little bit it increases alot when I decrease little bit it came down and then turned off on 2k rpm also on riding after few km the rpm drastically came down and down and then turned off and it wont start until cool or my friend pushed start me but it still stops after few km help plz

@nightridersclub1948

4 жыл бұрын

And today i noticed that one of my carb is smoking like steam

hey I have a 2005 katana 600, what does the vacuum diaphragm look like that you took off, because mine never came with one, and was wondering where I could get one because I need it for my carb.

@Fixnit14

7 жыл бұрын

+Garrett Chatterton it's the peace I removed over the valve cover. Run through the video you'll see it.

Do this work for the 750 1996 us well?

@Fixnit14

3 жыл бұрын

I'm not sure of the difference between the two. But the tolerances should be the same. Good luck with your project.

@Ryan-nn1kl

2 жыл бұрын

96 is a different setup download or buy the Haynes manual

Please will u tell me what is length size of clutch rode. Please

@Fixnit14

4 жыл бұрын

Dont know sorry

@nightridersclub1948

4 жыл бұрын

Wow da kho ma rapaida kra

@nightridersclub1948

4 жыл бұрын

9cm

Why not check clearences before we slackening the locknuts?

@Fixnit14

5 жыл бұрын

You could... but there is a recommended service time for the procedure. I can't recall at the moment when it is though. On cars it somewhere between 50k and 100k. Motorcycles would be much less because motorcycles are not expected to go beyond 100k. (I would assume anyway)

I have see that your bike has a fan on it. Is this standard I have a 750 and has no fan

@Fixnit14

7 жыл бұрын

+Craig Commons it's standard on a 2002 600cc

@robertsmith2956

3 ай бұрын

@@Fixnit14 guess the faster speed of the 750 makes it redundant. LOL My 600 was end of December of the last year, and had no fan. Maybe they ran out of them.

Are the 750s the same as the 600s?

@xQUACKARx

6 жыл бұрын

I assume you have found this out by now but yes. The 750s are the same (Excluding some years which are shim type adjustment)

@richardrichard5409

6 жыл бұрын

Frank Parker 750's were always locknut and screw....'98 on 600 also.

@xQUACKARx

6 жыл бұрын

fourelmscars I stand corrected. Many thanks for that information

would this fix low compression?

@Fixnit14

7 жыл бұрын

+Deeforeva Knight no... new piston rings are required to fix that problem.

@deeforevaknight1684

7 жыл бұрын

Fix-n-It Yea im having starting issues it went from no spark. change the signal generator. plugs are sparking now, but it wont fire unless constantly hold the start button for like 2 or 3 min (changed starter motor to) when it does turn over gotta hold the throttle so it wont die. 😔😔😔😔

@Fixnit14

7 жыл бұрын

+Deeforeva Knight wow... that could be a fuel problem. Or could be low compression. Pick up a compression tester kit and find out.

@deeforevaknight1684

7 жыл бұрын

Fix-n-It i was sayin it could be the float adjustment i did lol but I'll do the compression test friday. if that dont pan out guy wants to sell me a 750 cc to put in it sigh.

@deeforevaknight1684

7 жыл бұрын

Fix-n-It also when we i spray starting fluid in the air box it dosnt work lol but check out my vid on my page and see was it was doin b4 i put it in da shop.

Please follow the maintenance manual for proper procedures, I would not recommend this video unless you are on a desert island

@Fixnit14

4 жыл бұрын

I appreciate the criticism eventhough I used the manual during the procedure. 👍

@TerrySmith-em4ph

4 жыл бұрын

@@Fixnit14 How come you didn't remove the signal generator cover and turn the crankshaft using a 19 millimeter wrench like the manual states. also you stated that the valve clearence was in whole millimeters, good job other than that

@Fixnit14

4 жыл бұрын

The millimeters was a slip I did catch in editing. And for me it's easier and faster to leave the bike in gear and spin the tire then to open the crankcase and turn the crank. Working as a professional you learn to find the fastest way to do the work to make the most money without compromising the quality of the job. That was my personal bike at the time and I drove it another 10,000 + miles before it got wrecked beyond repair.

@TerrySmith-em4ph

4 жыл бұрын

@@Fixnit14 excellent

@charlietipton9471

3 жыл бұрын

why is he using so much silicone if he is using new gaskets? That is the bike I hate to work on after someone like that!

Next time maybe you can list parts that you actually used to do work? That would be more helpful...

@Fixnit14

3 жыл бұрын

Sorry... this is one of early videos where I didn't list the parts. Will most definitely do it next time. I can tell you I ordered most of my parts from bikebandit.com

10MM is a hell alot of clearance......lol

@Fixnit14

4 жыл бұрын

It's been a few years since I did that video. I think the 10mm is in reference the the wrench or I ment to say 0.010mm

@Zionsol777

4 жыл бұрын

@@Fixnit14 you just misspoke and I was just giving you a hard time.... good video otherwise.... :)

@Fixnit14

4 жыл бұрын

Thanks... I'll have more videos up in the future. Super busy with life stuff. Thanks for the sub and comment. 🤙😉

@robertsmith2956

3 ай бұрын

saves wear and tear on the valve springs and cam lobes.

@Zionsol777

3 ай бұрын

@@robertsmith2956 and tires

That loud ass music has GOT to go!