That’s one of the best step by step guides I’ve seen anyone make. The attention to detail with the auto air valve shows how thoroughly you do your job. We’ll done

@PlumbingDoctors

Жыл бұрын

Thanks 👍🏽👍🏽

Thank you so much. Hot water restored on daughter's birthday!

Iv being a heating engineer for over 20 years..I like ur style. Direct and to the point....Nice one

@PlumbingDoctors

Жыл бұрын

Thanks everyday is a school day

Keep up the good work , ur saving the nation some real money, in these hard times with ur insider videos A********

Thanks for the step by step guide ,i needed urgent fit , sick of begging gas engineers

@PlumbingDoctors

3 ай бұрын

No problem 👍

Fantastic step by step guide - thank you for doing it and uploading, as this enabled me to change the diverter valve on my valiant boiler and solved the problem where the radiators kept coming in when the hot water was not running. Awesome work..!!

Mate you saved me a few hundred quid! I did get a bit wet by not putting the pipe in far enough but this was an amazingly detailed and helpful video. Thanks mate

@PlumbingDoctors

15 күн бұрын

Glad I could help

Thank you most profoundly. Your video is very detailed, straight to the point. This video saved me in an emergency situation. Thank you once again!

@PlumbingDoctors

2 жыл бұрын

💯

Great detail and a job well done. I have a Vaillant Eco tec plus 637 that needs an intrusive service and its heating the rads but not the hot water. ( egg timer shows in the display), so hopefully the guy is a competent as you when he calls.

Great video Bro i have ordered my Diverter for my 832 thank you so much keep the good work up Ian.

That's one fantastic tutorial. Without your guidnace I wouldn't have been able to attempt it. Bravo !

@PlumbingDoctors

Жыл бұрын

Great to hear!

Thank you so much! Your video was incredibly detailed and made the process of changing the diverter valve on my Vaillant Ecotec Plus 837 so easy to follow. I couldn't have done it without your step-by-step guidance. Truly appreciate your effort and the clear explanations!

@PlumbingDoctors

2 ай бұрын

You're welcome!

Absolutely awesome! Really excellent well described guide that didn't rush through the job. Without this video I'm not sure I would have been brave enough to tackle it. You've saved me a fortune, thank you!! 👍

@PlumbingDoctors

6 ай бұрын

👍🏽

This Video saved me a FORTUNE!! I have exactly the same boiler (even the same toolkit!) and this video was spot on!! - I didn't bother servicing that last part, as I was too excited to see if it fixed my issue, but I plan to go back and do that tomorrow. Thankyou so much!

@PlumbingDoctors

4 ай бұрын

Glad it helped! 👍🏽

please keep posting, your vids are a real go to on what to expect with installs and services, I'm tired of being stuck with the cowboys

@PlumbingDoctors

Жыл бұрын

thanks bro

Great video. Bought back memories. Retired in 2019. Did many of these. Those two surface o rings at the back were always a worry.

@PlumbingDoctors

6 ай бұрын

Thanks for watching!

U r awesome, first guy ever seen wo gives brief details about maintenance, thanks a lot don't have more words but plz keep it up more videos.

@PlumbingDoctors

3 жыл бұрын

Thanks 👍🏻👍🏻

Excellent. Good job with a step by step detail. Very good for new Gas Safe Engineers like me. Muy muy bien hermano. Gracias.(Spanish).

Fantastic video 👍👍.....got to do this job next week on a protec 28 .....great top tips 😁😁

Waseem I must tell you this: THANK YOU, THANK YOU THANK YOU VERY VERY MUCH!!! This video has been the difference between a frutrating dripping Vaillant boiler, and a successful fixing operation! I have a Vaillant EcoBlock 236 boiler and, even if it is not the same model in your video, your instructions are so precise that I was able to fix it with the same smooth mood you have in your video! Thank you again for this! I've also clean the AAV as you wisely suggest! About the AAV I would add the following small advice: don't worry if the small spring get off the pin while washing - just keep on cleaning carefully, then reassemble the two pieces by twisting the spring onto the thread on the pin. I got scared when they separated while washing, I didn't expected that, and I was afraid not to have spare parts around, being Sunday! Well, at the end everything seems running correctly! Great video and great feeling! Greetings and Ciao! from Italy

@PlumbingDoctors

2 жыл бұрын

Thanks for the feedback and advice!!

Thank you for all details. I noticed other people do not show all the details.

@PlumbingDoctors

3 жыл бұрын

👍🏻

Hey, great looking video, my Vaillant 838 pressure has been going up about a bar a day now for a week, was beginning to think about what to do with it... being a slightly less qualified plumber - eg, not gas registered - I generally stayed away from opening a boiler up, but seeing this video, I think I owe it to myself.... and wife for Xmas pressies!! to try repressurising the vessel first, looks pretty straight forward, and not touching any gas components. A job for Friday afternoon... I'll be watching this video a few times more before then! Thanks for the help!

@cliveramsbotty6077

2 жыл бұрын

i'm not saying you shouldn't, but technically you're not supposed to take the cover off the boiler because it is a room sealed appliance.

I've done this today! I'd have been lost without your video. I swore much more than you and got fairly damp along the way too but job done!

@PlumbingDoctors

Жыл бұрын

Glad I could help!

What an easy video to follow, first time replacing one of these and was so easy once I followed your guide. 👍🏻

@PlumbingDoctors

6 ай бұрын

👍🏽

Excellent tutorial . Well explained, handy tips added in. Brilliant stuff. Many thanks for this.

@essahaidari620

Жыл бұрын

Very nice usefully video

Great video mate, just training as gas safe, will be watching your videos for your great detailed instruction.

@PlumbingDoctors

2 жыл бұрын

👍🏼

Proper video still I’m a phase 2 gas/plumber apprentice and we change these quite often so it was good to get a nice detailed video 👍🏾👍🏾

@PlumbingDoctors

4 ай бұрын

Thanks 👍

superb video thank you, took your time to explain everything fully.

what a tutorial. !! Well explained, well filmed and well done.. Great Help......Thanks a million.

@PlumbingDoctors

Жыл бұрын

👍👍

Bro... 1st engineer I know to give love to the aav. Keep up the good work👍🏾

Masha'Allah great depth and detail step by step video Jazaka'Allah Khairan.

@PlumbingDoctors

Жыл бұрын

JakazAllah khair thanks bro

Great tip about the air valve very clean instruction , Thank you so much cool video.

@PlumbingDoctors

2 жыл бұрын

Thanks

Absolutely brilliant video bro. In detail plus excellent tips. Keep it up. Helped me alot. From Wembley, London 😀

@PlumbingDoctors

3 жыл бұрын

Thanks bro

Fantastic. Really appreciate people like you, helping others with your knowledge and experience. I do the same, only I do it with apprentices, so I can pass my knowledge onto them, that means they will become competent skilled workers, who can then complete the circle and, help others.

@PlumbingDoctors

Жыл бұрын

Much appreciated

That's Very very Professional.. Brilliant stuff.. Well done Body.

@PlumbingDoctors

2 жыл бұрын

Thanks

Very good video buddy, followed you and was a breeze 👍. Very easy to follow steps and very detailed

@PlumbingDoctors

2 жыл бұрын

👍🏻👍🏻

Excellent step by step guide to a repair, well done you keep up the good work

@PlumbingDoctors

Жыл бұрын

👍🏽

I found your videos very helpful. I’m done now with my practicals waiting for boiler installations. Nice one brother. Masha Allah you are good in your job. Wish you more success.

@PlumbingDoctors

Жыл бұрын

JazakAllah khair

Thanks mate great explanations i'm really enjoy to watch it 👍

I like your style on the videos, nice and down to earth.

@PlumbingDoctors

3 жыл бұрын

Thanks mate.. best to be yourself 😉.. I appreciate the feedback

Man still such a helpful video, appreciate it 🙏

@PlumbingDoctors

6 ай бұрын

No worries!

Excellent video, re content and pace this is how a KZread tutorial should be made

@PlumbingDoctors

Жыл бұрын

Much appreciated!

Well done, did me a right favour. Saved me a few quid. Thanks

@PlumbingDoctors

2 жыл бұрын

💯

You are the man. Brilliant guide and very well done 10/10

@PlumbingDoctors

3 жыл бұрын

Thanks i appreciate the love

@cheekycharly2001

3 жыл бұрын

@@PlumbingDoctors Which Wera ratchet is it you use?

@PlumbingDoctors

3 жыл бұрын

You get it in the wera maintenance kit

Thanks mate you made that look easy

Brilliant presentation thanks for showing me the way of it👍

@PlumbingDoctors

Жыл бұрын

No problem 👍

That was a very accurate video bro. Enjoyed it a lot. ❤

Pity you don’t live in Sheffield I’d give you a job , good video mate like the way you clean auto air vent when boilers drained. I always clean pressure sensor as well , top man keep up the good work. Good to see top engineers in the industry 👍👍

@PlumbingDoctors

Жыл бұрын

yep good tip about the pressor sensor

Thanks very much i really appreciate the time and effort you have put in on this video your welcome to call round for a tea and chocolate biscuits thanks much appreciated 😊👌👍

@PlumbingDoctors

25 күн бұрын

👍🏽👍🏽

Brilliant video mate! keep them coming 👍

@PlumbingDoctors

2 жыл бұрын

Thanks

just followed your instruction , everything worked great .good tip about the auto air valve it needed cleaning .I would recomend putting the plug in the sink when cleaning small items as they have a bad habit of going down the trap . your instruction was clear and to the point no time wasted on waffle also good video of everything relevant to the job . 5 stars all the way

@PlumbingDoctors

3 жыл бұрын

Thanks for the detailed feedback mate and yes good tip about the plug 👍🏻

Video iz very informative..... it will help to make my portfolio.... JazakAllah Doctor Sahab

@PlumbingDoctors

Жыл бұрын

wa iyaak

Very informative video mate I’ve got my first diverter valve on a Vaillant to change tomorrow and I feel a lot more confident about it thanks to you. One thing I would say is it might be worth stating that you must be gas safe registered to take the case off a gas boiler as there are a few guys in the comments who clearly aren’t and have carried this job out.

@PlumbingDoctors

Жыл бұрын

👍👍 most wont listen anyway

Excellent video, thanks!

@PlumbingDoctors

3 ай бұрын

👍🏽

Thank you for taking the time to make a very clear comprehensive instructional video. Good Luck to you.

@PlumbingDoctors

3 жыл бұрын

Thanks for the feedback 👍🏻

@user-lu8vq2qd9c

2 жыл бұрын

@@PlumbingDoctors brother slaam, preciate the videos, very good videos keep em coming, can you please include pricing on what you charge for the jobs your doing for us newbies, much preciated, Allah bless ameen

Excellent video mate keep up the good work 👌

@PlumbingDoctors

3 жыл бұрын

Thanks mate

Really good video...clear and very easy to follow

@PlumbingDoctors

3 жыл бұрын

Thanks bro

Great video, well done.

Awesome video mate

Great informative instructions, thank you very much.

@PlumbingDoctors

Жыл бұрын

Glad it was helpful!

Excellent video Thanks

Very detailed information thanks

@PlumbingDoctors

Жыл бұрын

My pleasure

Great video, thanks

Thanks, very well explained.

Nicely done fella

Great vid bro!

Wow, exceptional video. Excellent workmanship and brilliant guidance... thank you...iv subscribed... Mashala...

@PlumbingDoctors

2 жыл бұрын

Alhumdulilah 👍🏼

Thanks you made look easy

Great video guys, very informative, the diverter valve is leaking on my Valiant boiler and you've given me the courage to attempt to change it, been quoted £500 so hopefully some money saved..

@PlumbingDoctors

3 жыл бұрын

If your not Gas Safe Registered then its illegal to remove the front cover off the boiler...

@mikepritchard5636

3 жыл бұрын

@@PlumbingDoctors duly noted!

I have never seen anyone like this brother given details on plumbing and gas on KZread or any public accedemic relating to this profession. May Allah reward more br. In sha Allah. Meanwhile, I love to meet u br.if u are in London pls. Stay blessed.

@PlumbingDoctors

2 жыл бұрын

JazakAllah khair bro

Hello U done the work very nicely and very accurate

@PlumbingDoctors

5 ай бұрын

👍🏽

Brilliant video

Good job. Thanks

Thank you so much for this video! Uno dos tres quatro!

@PlumbingDoctors

4 ай бұрын

You got it!

Im loking your video and fix new boiler thankfully video

Well done 👏 good job 👏 👍

Thank you for this!

@PlumbingDoctors

Жыл бұрын

My pleasure!

Excellent video - more than enough to get me to be more than happy to pay a proper Gas Safe Boiler tech to do this job and not me, hate spending money on something I should do… But I hate flooding the house and I’d really hate killing me or the family for the sake of a few hundred pounds! Excellent video!!

@user-yw6qb9tt7t

Жыл бұрын

If you shut thr valves off under the boiler you only have the boiler water to discharge. I have seen engineers stand with a bucket underneath. You need a bicycle pump and shraeder connector and a small tube of fernox yellow one as shown in video . Long screw driver. Philips or ootiknal flat. A ratchet that can take hex bits and that is it. A wide jaw shifting spanner preferably thin jaws. Only thing most diyers would need is the fernox LSX yellow tube

You are a star thank you for sharing👍👍

@PlumbingDoctors

2 жыл бұрын

💯

Great video guys 😊

@PlumbingDoctors

3 жыл бұрын

Thanks buddy

Excellent video as usual.

@PlumbingDoctors

3 жыл бұрын

Thanks 😊

very detail explanation. unlike other engineers video which show less detail, this is every step well explain video, love it, would b looking at more of ur videos... thank you

Assalamualikum Very nice explain Thanks

Nice, got one to do tomorrow 👍

@PlumbingDoctors

Жыл бұрын

Hope you enjoy it!

Hi Wasim My name is Suri. I m from London. I m 54 years old studying to be a Gas Safety Engineer. I m in the process of making job portpolio. I saw your video on changing valliant diverter valve. I m very much pleased the way u explained in very simplistic way. I was a great help. May Allah bless u and ur family all the time. Regards

@PlumbingDoctors

2 жыл бұрын

Thanks brother 👍🏻 JazakAllah khair

Excellent 👏👏👏

Great vid 👊🏼

@PlumbingDoctors

3 жыл бұрын

Thanks 👊

Great vid. AAV's don't get enough love on a service 👌. Interesting place for a radiator, I'm guessing to dry clothes and towels?

@PlumbingDoctors

3 жыл бұрын

Yep most people overlook the AAV's but its good practice to give them a good clean 👍🏻.. I did not ask the customer about the radiator but i think its used to dry clothes.. great idea on my opinion 👌

Thank u for showing how to change it mine is leaking been ask 250 to change it what a joke thanks for making life easy for people 😊

@lardy70s

3 жыл бұрын

Hi mate. I just done mine this morning. Did you need to bleed your radiators.

Brilliant video thanks 🙏

@PlumbingDoctors

Жыл бұрын

Very welcome

Good man.

Great video very informative 👍👍👍

@PlumbingDoctors

2 жыл бұрын

Thanks 😊

Great video mate, very informative. I have a little question, when they fail do you find they'll usually fail in with CH open or HW open? Thanks again

Very well explained 👍

@PlumbingDoctors

2 жыл бұрын

👍🏼

Thx for the video, it's interesting to watch someone who does the same work but on the other side of the planet :P

@PlumbingDoctors

3 жыл бұрын

Where you from?

@foxsol1d

3 жыл бұрын

@@PlumbingDoctors Saint-Petersburg, Russia

@PlumbingDoctors

3 жыл бұрын

Oh nice... is there much difference in the plumbing?

@foxsol1d

2 жыл бұрын

@@PlumbingDoctors we got less copper used as material of pipes. Only if you are rich enough 😁. Most of the systems are made with polypropylene. And most of the boilers are non condens. It's because of price and lack of good engineers outside Moscow and Saint-Petersburg. Also green ideas are not shared by the customers and the government so there are still some people who respect and choose those big floor-standing cast iron boiler.

I have been watching your videos, very well explained, specially for beginners like me is very useful, you are basically filling the gap I think, there are lots of similar videos on KZread but you have tried to clarify it targeting beginners, thank you very much, from your videos I am 100% sure that your first priority is to help new guys, thank you very much taking time to do this. I got some request for you for future videos. 1. When you install new boiler can closely and in detail explain about flue installation referring to the Manufacturer Instructions, l know you have done briefly before, but please expand it bit more. 2. Can you also explain what short of screws you use for different types of walls, like for plaster board, brick wall etc, bit of explanation. 3. Can you please do video now and then answering people's questions, if you do this please make a short video so that we can send questions on the comment section. Thank you very much.

@PlumbingDoctors

2 жыл бұрын

Wow thanks for the recommendations and i will take this on board!

Thx a lot brother jazaka Allah

Waseem Very good tutorial , do you mind to let me know how to get hold by name that very useful tool kit? Thanks

Excellent

@PlumbingDoctors

Жыл бұрын

Thank you! Cheers!

Great work thanks

@PlumbingDoctors

2 жыл бұрын

👍🏻