I can't believe there are KZread videos testing out a whole bunch of different 3D modeling finishing solutions. I thought I was going to have to test all these things myself. This is going to save me hundreds of dollars and hours, thank you!

@Darkwingdad

Жыл бұрын

More to come too lol

Really great alternative. I can do this in the house without the wife hating me lol! Thanks for sharing!

@Darkwingdad

Жыл бұрын

Lol I can relate!

This is exactly what I need, in Portugal doesnt exist Bondo but Liquitex, and my apartment it's too small and Bondo smells really bad and too toxic, thank you Dark!

@Darkwingdad

Ай бұрын

Anytime!

Clear cut, clean video , comforting environment, detail description, straight to the point comparison ......... why is youtube not promoting channel like this more? Subscribed.

@Darkwingdad

Жыл бұрын

I appreciate the feedback. All I can do is keep going & hope the channel grows more.

Awesome video. Getting a lot of knowledge of different ways to finish a print.

Your videos are so helpful and interesting!! Thankyou for sharing!!

Great info, sanding is the bane of my existence but i have a cosplay shop so tips like this make life easier!

@Darkwingdad

Жыл бұрын

Always trying to give everyone an edge against sanding lol

I wanted to try it for a few weeks now, I'm so happy it seems a good solution.

Good review, will be trying this

I love these product demos, they remind me of project farms videos a bit. Thanks for the informative content!

@Darkwingdad

Жыл бұрын

Thanks for watching!

Happy to see for review. This is my favorite. The ipa mix is definitely gonna be my next try didn't think to try that.

@Darkwingdad

Жыл бұрын

Once you get the right dilution it’s honestly pretty awesome. I’m Glad I tried this.

Just saw Divide the Fall last month in Cambridge, MA. They played on a bill with Awake for Days (I liked them too), Sygnal to Noise, and headliner, Cold. Tiny venue. Great show. Aside from that, thanks for this video. Love the smoothing videos. Always in search of the best methods possible. Let's go Bz! 🤘💀

Great info thanks.

This product seems ideal for me

1 to 1 ratio. You want a milk like consistency. It worked pretty well for me. Will make a follow up when I get home to clarify more

This is awesome, living in Indiana where the weather does not let me work out doors 6 months of the year this is a great alternative. After watching this I got curious and saw that you can add color to the paste as well which would also be helpful.

@Darkwingdad

Жыл бұрын

Yep, you can even use airbrush medium to reduce this, which won’t affect color if you add it too.

I live on an island in the Mediterranean, a lot if products available in the US won't ship to me. I'll definitely try this out

Great video, thank you for putting in the hard work. I see that the paste comes in a flexible version, was it the regular modelling paste you carried out the trial with?

Hy ..my guiding Angel is Back to rock 🤩.... happy to see you sir and the hairstyle is just🔥🔥

@Darkwingdad

Жыл бұрын

Gotta get it trimmed it’s getting lonnnng lol

Super excited to try this out. I don't mind binding but it's strong odor and doesn't always work as well as I'd like

@Darkwingdad

Жыл бұрын

Which bondo product are you using?

Nice! I've used this medium straight from the jar before, but I've never considered diluting with isopropyl.

@Darkwingdad

Жыл бұрын

Much easier to sand & dries quicker, definitely worth it to try!

Very heplful for us living in cold climate 6+ months of the year. I'm not afraid of acetone but have something I don't have ventilate as much is nice.

@Darkwingdad

4 ай бұрын

Acetone is soooo widely used many people don’t even realize it’s in many hand cleaners along with alcohol. It’s a nice,safe & simple option!

First, thanks for this video, you're awesome Here's my review: The product is a great alternative for sure but in fairness I personally don't recommend it for detailed pieces. On flat surfaces it's very smooth once sanded and can be an okay filler. I don't really like it as it's harder to sand down and takes ages to dry, specially if you're filling big crevices... Thanks again for the video :D

Also would like to try, Liquitex Pouring Medium :)

thanks , great info pal , just ordered some to try it out

@Darkwingdad

Жыл бұрын

Let me know how you make out with it!

Thanks for this, can't believe how fast you had it up. do you think its possible to dilute enough to airbrush it on?

@Darkwingdad

Жыл бұрын

Probably a future video, I think it’s possible with ipa, water I think is doable but might get runny

Do you know the IPA ratio of that last attempt that was self leveling?

Stop making me buy random products dang it XD Legit though - these videos are super helpful and feel way more real than half the other ones i see.

@Darkwingdad

Жыл бұрын

Lol I’m only here to help I promise!!

Have you tried using guitar scraper cards for smoothing? You can find bigger card scrapers for wood working, but the guitar ones are smaller.

@Darkwingdad

Жыл бұрын

No, not enough control, too much effort honestly.

I wonder if their slow dry gel might be the better option? Because it is slower to dry that will give it time to level out and sink into the cavities. Might be worth checking out and see if it is any better than the paste?

@Darkwingdad

Жыл бұрын

I may check that out. I seen that had a couple different pastes

If you're diluting it, will it not go through an airbrush with a large Ø needle? It would go on smoother & involve less sanding. 🤷

@Darkwingdad

Жыл бұрын

Yes I have to test it yet.

@Loneman_OG

Жыл бұрын

@@Darkwingdad Cool! I'll look forward to the results. 👍

Great video. In the Amazon links you shared the US links are for Modelling Paste, whereas the U.K. link is for Flexible Modelling Paste. Which one should it be? 😊

@Darkwingdad

Жыл бұрын

You can use either the flexible has gels in it & has a longer play time & dry a bit slower but due to the additives tend to improve adhesion and durability.

@jamiebmorton

Жыл бұрын

Oh that’s interesting to know. I’m going to give this a try. Thanks for the informative content and trying out a product which is more readily available outside the U.S.

Great video but really hard to watch during the results portion because it's so cut up. Thanks for showing it just thought I would throw that out there..

Bondo putty acetone mix vs this, which do you prefer overall?

@Darkwingdad

3 ай бұрын

Bondo or dolphin 1k w/ acetone for sure

Could you use one of those liquid drying agents to speed the drying?

@Darkwingdad

Жыл бұрын

These don’t require a hardener nor would I recommend doing so. Heat & uv will accelerate drying, I would stick with that.

Do you think this would work thinned down enough to spray through an airbrush?

@Darkwingdad

Жыл бұрын

With water I think you’d be ok or with the right dilution & ipa. But be careful with spray time, once this starts to dry it’ll definitely clog the airbrush.

Think it could be thinned to a point it can be airbrushed? This product is way easier to ger here in Mexico than upol (I can get it from ebay, but with the shipping and most likely import taxes it can get a bit expensive) and since you give it your blessing I might go for it

@Lusanagi

Жыл бұрын

Haha didn't see it was already asked

@Darkwingdad

Жыл бұрын

@@Lusanagi looks like I need to test it & find out huh? Lol

@Lusanagi

Жыл бұрын

Ohhhhh I just realized that I can only get flexible paste (there's a the "normal" one from an Amazon reseller, but it's price is hiked) I guess it could work, but I'm not 100% sure

Do you read my mind? I was researching EU alternatives to bondo this weekend, come to Mystery Makers, and see you post this video. Someone should give you a day job doing this stuff 😁

@Darkwingdad

Жыл бұрын

😂 LOL the goal is eventually to be a full time creator. For now it’s tinkering when I can. Glad the video is here for my EU & UK comrades for reference

@DeKamme

Жыл бұрын

@@Darkwingdad did you consider starting a patreon for this kind of content? Besides your makes, I think a lot of other makers would be interested in your research. And I guess all this processing material isn't free.

@Darkwingdad

Жыл бұрын

@@DeKamme it’s something I’m considering for sure now, several people have asked

Have you ever printed hero statues or anything like that in FDM? I would like to see that stuff post processed effectively in FDM.

@Darkwingdad

Жыл бұрын

I haven’t but it’s worth a shot!

Hi, do you know any EU or UK source for the rust-oleum flat black primer? I did not find any supplier in EU , this is crazy...

@Darkwingdad

Жыл бұрын

That’s odd there’s no options. I didn’t put a link for the primer because you can literally use any primer that’s available. I can look stuff up if you can’t find any just let me know.

Okay bro... FDM printer question. Why does it lay down great for 3 inches, then just stop extruding right. I start it again... same thing. So it is not a damn clog in the tungsten nozzle. Like wtf? I have cosplay to do, and both my Kobra Max's are doing this.

@Darkwingdad

Жыл бұрын

Have you checked your esteps & flow?

Pebo make one that is half the price of Liquitex, I havent used either so cant say how they compare

@Darkwingdad

Жыл бұрын

It’s a smaller tube. $8 for 100ml or $20 for 238ml. Although liquitex cost more per ml is cheaper. A better deal if you plan to use it all.

Does the "tex" part of the name reference latex? I'm allergic.

@Darkwingdad

Жыл бұрын

It doesn’t contain any latex or formaldehyde in any of there mediums.

I've very possibly seen most methods for smoothening. This contains some form of resin so I just wanted to ask, have you tried smoothing prints with just resin. Not the one you get for a 3d print. Just basic DIY acrylic resin. I've seen some renders and it makes PLA food safe it seems like so I'm going to give it a shot. Thought I'd tell you :)

@DeKamme

Жыл бұрын

Record it and post a youtube! I'm up for creating a post-processing FB group to share these kinds of ideas... or a discord. Could generate more views as well!

@JohnyPatrick

Жыл бұрын

@@DeKamme You mean me?

@DeKamme

Жыл бұрын

@Johny Patrick yup, I'd love to see how your idea goes. I also ordered some local finishing products, every region carries different brands and types, so that's why I threw that idea for a finishing group

I keep having problems with my printer skipping. Can you give me any advice?

@Darkwingdad

Жыл бұрын

Skipping as in skipped layers? Explain more in detail.

@Dirtydeviantjbyrd

Жыл бұрын

Yes sir. I've changed the hotend and the stepper motor and even slowed the prints down to 30%and turned the heat up to max slowly obviously but nothing is working. I have a magician max and an aquila c2 they both are having issues. I thought it was the cooler temperatures but even on a warm weather day it doesn't change.

What was the official makeup of alcohol to liquitex at the end?

@Darkwingdad

4 ай бұрын

2:1 is ideal liquitex is thick so it needs more to make it more liquidy

Can you put it through an airbrush?

@Darkwingdad

Жыл бұрын

Something I’ll have to test but I believe you can in the right dilution

@robertstewart9989

Жыл бұрын

I'm curious how much the piece can flex before the paste starts cracking and if the flexible paste from Liquitex will work as a substitute on less rigid pieces.

@Darkwingdad

Жыл бұрын

@@robertstewart9989 flexing I’m not sure but it’s worth a test

My opinion is that you diluted with to much water, you should only add enough water to get a consistancy that you want, a 3 or 4 parts putty to one part water should be a good consistancy. Or only add enough water to a consistancy that you like.

@Darkwingdad

Жыл бұрын

I tried a few ratios, still took the longest to dry with mediocre filling results, too little & it’s the same as full concentrate, harder to sand & time wasted.

Great video, very informative. Just one thing, the editing on your video, the way it jumps, makes it kinda hard to watch.

@Darkwingdad

Жыл бұрын

People have told me before they are too long so I try to cut to the important parts. When I get my Patreon going I’ll have full length videos