Using Dig Effectively!!
Ойын-сауық
I'm not a pro but I'm ok with it. Links below to the Capra, the parts in the capra and more, use them to support the channel. Thanks
Axial Capra
Amain bit.ly/2MxYFiu
Amazon amzn.to/2IyEXVH
Ebay ebay.us/gUGVIt
Proline KM3 tires
Amain bit.ly/2Yb2z6m
Amazon amzn.to/33WsSAU
Ebay ebay.us/EPMjsk
Reefs 444 Servo
Amain bit.ly/3ljHO2P
Amazon amzn.to/39WqZYU
Ebay ebay.us/zXGljU
Reefs Micro 99 servo ( for dig )
Amain bit.ly/3dFhvAl
Amazon amzn.to/3n50ofV
Ebay ebay.us/hQgq6N
Flysky GT5 Radio
Amazon amzn.to/2JHUXFz
Ebay ebay.us/KCgKme
If you plan to simply click a link and check out, get some body clips to go with that, plus it guarantees the affiliate works correctly, thanks
Amain bit.ly/39YMVmm
Amazon amzn.to/3gusUoX
Ebay ebay.us/FvRaW8
Amain Affiliate bit.ly/3cHmsHX
Amazon Affiliate amzn.to/2JHhbaI
Ebay Affiliate ebay.us/sNbT4F
Пікірлер: 64
Great examples of using dig. One thing that I didn’t see you do is use the freewheeling position on the dig. It’s really useful too in certain instances when you don’t want to drive the rear wheels, but also don’t want to drag them. I fricken love my Capra. It constantly allows me to challenge myself with different lines I would even attempt with other trucks.
@ExocagedRC
3 жыл бұрын
I’ve only seen that useful on flat areas to get a bit of a rolling dig on turns.
@billderas3420
3 жыл бұрын
@@ExocagedRC You provided some great samples for using a DIG. Found freewheeling useful for sidehilling on a high traction surface with a rig that has a lot of overdrive (25-30+%). Allows the rear wheels to disconnect from the overdrive and better follow the fronts. Depends on the surface you are crawling on. I go back and forth on having my DIG units set up with 2-position or 3-position switching.
This was a terific use of dig. As a new rc guy, I really appreciate this video. You went above and beyond on your course. Those trail placards are a neat touch.
@ExocagedRC
3 жыл бұрын
Thank you
Wow great showing ! Thank you.
Very informative, very well explained.
Another great and useful video thanks
This will be a great vid for my daughter to watch. She has not tried to use the dig on her Capra. Thanks teacher!!!
Awesome. Thank you for this informative video!
Also showing very good driving 👍
@ExocagedRC
3 жыл бұрын
Thank you 👍
Never understood why it fell out of favor. Weight maybe? Great video👍
As always a great video. I watch these on the way to work and they definitely put me in a better mood.
Excellent stuff, thanks! 👍
I need to get my self a Capra
Great video and explanation of the dig. I'll have to look for opportunities to use if more often. I need more diverse terrain to drive on.
Well all these crawler vids finally got me going out to get one. I was never really into crawling but I think it’s time to give it a shot. Any suggestions on a truck?? Anyone??
Another excellent video!!!
Great content brother! Keep them coming. 💯
You need to be able to put rear tires in freewheel on the steep uphill climbs
@ExocagedRC
3 жыл бұрын
tried that, doesn't work at all for me
@evertyager
3 жыл бұрын
@@ExocagedRC why won’t it work. I had a rc4wd dig tranny years ago and it did all three functions 4wd freewheel and rear lock.
Thanks for the useful tips...was cool to see the capabilities of dig. Recently received my new Capra, gonna take it on its first run tomorrow.
I need to learn how to set a radio up right with the dig and 2 speed. FSGT5 channel 5-6
@ExocagedRC
3 жыл бұрын
choose the channel/knob you want and set the end points
I can dig it! 💪💯
Damn I never even thought about preloading the shocks using the dog. Good tip I will definitely be using that
Have you considered trying out the new redcat Gen8 v2 id like to see a review by you great video btw
@ExocagedRC
3 жыл бұрын
It's not really any different feature-wise as compared to my current, gen8
Great video as always 👍 does the scx10iii with dig crawl as good as the Capra does with dig
@ExocagedRC
3 жыл бұрын
it works well yes
Great videos. I just found out your channel and its easily me favorite now. I just ordered Capra kit now and I was wandering what 2.2 tire is your favorite and you would recommend. There will be some brass.
@ExocagedRC
3 жыл бұрын
Before you do the 2.2’s look for my video where I did that. It’s best to stretch the wheelbase with longer rod ends if not it will just flop over backwards. Brass only at the portal drops.
@tgerasimov
3 жыл бұрын
@@ExocagedRC i see. You used the links from trx4 if i remember correctly. Brass only on the portal drops will be easier on the budget. Cool. Do you think that AXE 540L R2 can be fit with some trimming in the capra? I saw your video with the 550 motor, but seems the end of the motor was sloped, which made the job easier.
@ExocagedRC
3 жыл бұрын
I posted a pic in the community tab. It takes a lot more trimming to make it work in the Capra. I’m trying to get a new belly made for the Capra that will fit it and extend the rear end out 12mm. That would take care of all you want to do.
I believe cutting a cutting brake Allows you to brake each rear wheel individually not sure maybe someone could correct me if that is not correct
@ExocagedRC
3 жыл бұрын
Its been a long time since I messed with the real trucks, you're most likely right on that.
@discusdog
3 жыл бұрын
@@ExocagedRC its used for pretty much the same purpose anyways Dig,like 4ws is more learning when not to use it....lol but can be massively helpful when you get good with it.
Is there any way to use front wheel drive only and let rear axle free wheel on the Capra, with ability to go back into 4wd?
@ExocagedRC
3 жыл бұрын
Yes you can trim or set 3pos switches to get the neutral
@brianonthego
3 жыл бұрын
@@ExocagedRC that has to be way more useful than 4w steer..in my opinion.
do you ever hook the dig up with the freewheel option?
Thanks for the video, did you do anything that the Capra DIG locks more easily? Somtimes I got the Problem that the DIG doesn't lock or doesn't release on the first attemp
@ExocagedRC
3 жыл бұрын
yes it has a REEFS RC 99 Micro servo
@prinznapp2018
3 жыл бұрын
@@ExocagedRC OK thanks, maybe I will try a more powerful servo... REEFS Servos are unfortunately hard to get in Germany... Stay well and safe
Vanquish has had a dig for the scx10 and scx10ii for years. Also they make a different dig for their vs410. Doing some research helps
@ExocagedRC
3 жыл бұрын
yes I know, I used their Hurst dig years ago, the feature fell out of the spotlight for a long time until the Capra brought it back.
@urdonercjeremyburris7541
3 жыл бұрын
Might have fell out in your area but I've seen it alot here in ohio
@urdonercjeremyburris7541
3 жыл бұрын
And its hurtz dig
Do you need a high dollar controller to be able to set the end points on the dig servo
@ExocagedRC
3 жыл бұрын
No, most normal 3ch radios can adjust the epa on ch3, even the stock radio is adjustable but its a bit odd to setup
@rcjoe406
3 жыл бұрын
@@ExocagedRC ok cool
Is there front overdrive in that Capra?
@ExocagedRC
3 жыл бұрын
yes there is, with the dig locked, the OD doesn't matter. OD works well on turn spots where dig isn't practical
@jonathantholen919
3 жыл бұрын
@@ExocagedRC thank you for your reply. Trying to find video of what setup do you have for Overdrive in that one. If you happen to see this and have time to send one more reply I'd like to know. Thank you always
Joe i noticed you have an aftermarket housing in your 10lll what are you using and do you like it.My 10lll is setting right now with a broken front housing
Diggin the Vid! ~;+}>
@exocagedrc would you do a traxxas summit series or set of videos? I neeneed some major help with mine.
@discusdog
3 жыл бұрын
What is your issue.I am pretty familiar with the summit.
@Gmcworrior1
3 жыл бұрын
@@discusdog i need a good recommendation for a replacement motor. I want to go brushless and gear it down a little more
@discusdog
3 жыл бұрын
@@Gmcworrior1 brushless comes with its issues as well.i run a 2000kv sensored motor on a tekin rx8 esc on 4s.It has plenty of power for trail use.I de tuned the punch control so it doesnt Destroy axleshafts regularly. My advice to anyone going brushless in something this big and heavy upgrade your inner and outer pinion bearings,the stock bearings do not deal with the extra rpm and torque very well for long.slipper setup is also important to reduce the instant shock load through all the free play in the driveline.
@discusdog
3 жыл бұрын
@@Gmcworrior1 I ran 11/58 gearing.It is pretty close to the stock ratio but allowed me to rotate the motor in farther and lowered the CG a tiny bit.
1👍👏👏👏