Best part is the last shot of a completely different part of the door.

@kippdifilippo342

4 жыл бұрын

exactly not even close to correctly fixing

@Mark2ube

4 жыл бұрын

And the 2nd best part is the melted 1” circle of original vinyl that’s now highlighting your badly repaired hole like a flaming target yelling at you to “look here!”

@jonathancoryell7232

3 жыл бұрын

You guys just don't get art

@shamilrullah8917

3 жыл бұрын

Absolutely, because the damage part after repairing have circle heat mark it make look more weird.

@wagnerribeiro8036

2 жыл бұрын

How to fix 1 mm diameter hole by covering it with a 10 mm diameter thin layer of not matching paint. Hahah

I can’t stop laughing cause now it looks worse than when started. lmao.

@heimannyoutube4359

3 ай бұрын

Worse…

@ignjatovic85

28 күн бұрын

Exactly 😂😂😂

He melted the good vinyl around the hole. What a dork! LOLOLOL

@danielterranova620

3 жыл бұрын

I'm fucking crying laughing. While he said, "were going to get this metal WARM on this wood." I'm thinking why the fuck is he burning the metal so damn hot!!!lmfao. Im guessing he even waited a min thinking he got it to hot and still went and made the fucking hole worse!!! LMFAO. THEN DOESNT EVEN SHOW THE OUTCOME AFTER. "USING THIS BULLSHIT PDODUCT TO CLEAN THE SURROUNDING AREA " LMFAO. OH FUCK ME. I needed this shit today, good shit Bob the Builder!

Great. You removed the torn part off which could have been glued back into place and replaced it with an ugly ring burn. FAIL!

Hahaaaaa!!!! 🤣🤣🤣 quit playing mannn!!! made my day I cant stop cracking up watching this video!!!!

Is there an updated version of this video?! This was a long time ago and soo many what not to do things.

Probably my favourite Tim & Eric sketch

That textured paper was a real joke 😂

Looks worse

@tsh85

10 жыл бұрын

I agree. I'd rather have the tiny hole than a huge miscolored circle shape of melted vinyl. It's so obvious that it was repaired.

Thanks bob!

Amazing! Will this work on a cut as well in the vinyl?

Just the smallest amount of super glue would have been so much better.

I was really hyped at first bc of the brick (looking to make repairs on my own) but man...

Is this a joke? Like tongue in cheek humor? I hope not. Your failure here is of superb quality. Excellent work.

I would give this a thumbs up, Just the tool you used to heat the vinyl should have been smaller

I'm weak on that intro tho 🤣🤣

@noahgamingplaysyt9845

2 жыл бұрын

Lol

I immediately know this video will be shit when I see "ehow"

why does this video lint come up first on google

I did anyone else notice that when he showed the end result it was on the other side of the door lol

who the hell would give this a thumbs up?

I never saw you before but I just want to thank you because all other videos were absolutely and incredible fails you are the only one who made sense and actually showed me how to get this done correctly thank you kind sir!

So many ways this can go wrong

LMFAO at these comments! Dude, youtube will call you out if your a hack, lol!

Searching for an actual vinyl fix, and this pops up. I can't help it watch it several times. Why pan to the lock? It's so bad it's good.

4:00 to 4:11 = some magic happens?

You put your hand over the repair and showed a completely different part of the door !!! I was just about to give you your own tv show . But not now

Better to just put a sticker over it.

@nanzhanz344

5 жыл бұрын

atnfn real shit man that's what I did lmao

@seanmcnally4392

4 жыл бұрын

A bandaid

After removing the applicator, he paused when he saw the burn ring.. Lolzz, wasn't expecting that was he

Is this a joke... Imagine the look on the face of the car owner! "Err... That's different... Well, the hole has gone... Send me the bill" Goes out and buys a "Please remember you seatbelt!" sticker for a buck.

nice repair bro

Son of Benny Hill tries his luck at a toyota dealer fixing holes . lol!!😁

That's call DO IT YOUR SELF. As a car recon tech. Just to repair that hole you need besides to clean the area you need to apply compound or vinyl fill and then iron or heat gun the area using Teflon. And cold block after iron it. And Do, a second step of vinyl fill and come with the texture pad and dye the area. That it. But was a good video too thanks

I didn't read the comments until after the video, now I've pmsl

I'm fucking crying laughing. While he said, "were going to get this metal WARM on this wood." I'm thinking why the fuck is he burning the metal so damn hot!!!lmfao. Im guessing he even waited a min thinking he got it to hot and still went and made the fucking hole worse!!! LMFAO. THEN DOESNT EVEN SHOW THE OUTCOME AFTER. "USING THIS BULLSHIT PDODUCT TO CLEAN THE SURROUNDING AREA " LMFAO. OH FUCK ME. I needed this shit today, good shit Bob the Builder!

Wow. What a waste of time on a terrible repair attempt. I think it looks even worse now since you can see a much bigger damaged area now. I have seen vinyl patching that has come out pretty damn good but I would reupholster the door panel before I did this to it.

Now looks like a car cigarette lighter was pressed into it.. hahaha!

What a Shit repair! Done more damage than anything and it was so bad they had to show a different part of the interior lol 😂🤣😂🤣 great Camera Trick 👍

@noahgamingplaysyt9845

2 жыл бұрын

Lol

🤣 🤣 🤣 what a _HATCHET JOB!!!_ it's as bad as all the comments say... can't believe you posted this!!!

LOL, from a small hole you made a big stain from melting the vinyl around it :D good job

Come on guys, he did repair the tear, even if it does look like dog shit.

Benny hill music and this video would be complete.

Whoops !!!!!

@noahgamingplaysyt9845

2 жыл бұрын

Hi

That's a pretty shitty fix. I would be pissed if that was the result I got after paying someone to fix a cut that small on my shit.

the hole wasn't filled, and the disk shaped vinyl filler all around it looks like ass

This might be the most epic video on KZread. Absolutely brilliant. Not.

Man people were trolling ages ago

Hahaha. This was funny.

What the heck was that repair!? It's ten times worse for God sake.

Mr Bob u ruined that door buy melting the surrounding area

instructions unclear. car on fire.

@friedchicken1

2 жыл бұрын

a car on fire is still better than the repair he did

lousy job

realy? the last shot was not of the repair area lol

You showed the right side of door at the end but you repaired the left side. As well you clearly see the indentation for that hole and it's dull not shiny circular spot.. horrible job

horrible filming with the panning. you melted a circle onto the vinyl. hmmmm

Fatal error :)

HAHAHAHAHAHAHAHAHHAHA

thanks.. please take off your finger when you cut with the razor.. it looks dangerous.

Why did he apply AN EXTREMELY HOT PIECE OF METAL directly to it 🤣🤣 omg total fail

too much heat using a torch

@ahanthemrajen5141

6 жыл бұрын

sexual relation men and woman of China

@ahanthemrajen5141

6 жыл бұрын

yes

@ahanthemrajen5141

6 жыл бұрын

mn FedEx

@ahanthemrajen5141

6 жыл бұрын

.

😂

he made sure not to focus on the results

@allwrighty100

2 жыл бұрын

He didn't focus on anything. The camera was all over the place.

This is definitely not the way to do it lol

I have the exact same kit, nowhere in the instructions does it say apply heat to the pattern compression tool. It says it takes one hour to dry apply 3x, so will take three hours to cure all up. What a shockingly stupid video. Dumb is dumb I guess. That is not personal to the video poster but he has consolidated his position by not pulling the video down. Or changing it. Alternatively he has some axe to grid with the producer of the product or the business owner.......

hahaha is this a parody or something?

😡

Terrible job...I hope you did NOT charge for it.....

Bruh...that looks like shit. Actually worse than prior to the "repair"...

what the FAK.........😂😂😂😂😂😂😂

That looks awful.

FLOL This video and comments. I know its 12 yrs ago but even the repair kit looks shit and should be left on the shops shelf. Please, someone, add Benny Hill music. Please

LOL, I saw the hole you failed to fill then you put the camera on a different undamaged area to pretend you fixed it. I smell fraud and a lawsuit. Lies.