Use the Right Gasket Material - Wrenchin' Up
Автокөліктер мен көлік құралдары
Replacing a Water Pump is one thing. Using the proper gasket is quite another. Many of today's Water Pumps require special gasket material and shapes to insure proper sealing because of higher engine temperatures, dissimilar metals, coolant requirements, torque requirements, etc. In many cases, failure to use the gasket supplied by the pump manufacturer was the cause of coolant leaks and comebacks. An expert in the technology helps us understand why.
www.airtexproducts.com
Wrenchin' Up with Jim Bates strives to deliver automotive technical information and ideas from manufacturers and engineers to interested technicians and enthusiasts on a weekly basis. A new video is uploaded almost every Wednesday.
Due to factors beyond the control of Wrenchin' Up with Jim Bates, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Wrenchin' Up with Jim Bates assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Wrenchin' Up with Jim Bates recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of Wrenchin' Up with Jim Bates, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not Wrenchin' Up with Jim Bates.
Twitter: @jimfbates
Пікірлер: 27
Within the last couple of years, I hear a lot of people praising liquid, like Permatex, over solid gaskets. I called the new car dealership I used to work at and talked to my boys in service, and they, hands down, only use liquid gaskets for water pumps on any personal projects.
@WrenchinUpwithJimBates
Жыл бұрын
Hi - Thanks for watching and sharing your experience!
Those MP-15 gaskets are the best!!
@WrenchinUpwithJimBates
Жыл бұрын
Hi - Thanks for watching and sharing your opinion!
@edgarnevarez5663
11 күн бұрын
Where can I get a set.. anyone??
What is the name of the gasket material and where can I buy sheets of it?
@WrenchinUpwithJimBates
7 жыл бұрын
Hi - I don't work for that company and don't have that kind of information, but you can contact them with your question directly. Their web address is in the metadata below the video. Thanks for watching!
Do you put RTV on it?
@WrenchinUpwithJimBates
5 жыл бұрын
Hi - Thanks for watching! RTV and other sealing compounds can be helpful when installing gaskets in between parts that have rough or pitted surfaces but sometimes it’s best to just follow the manufacture’s installation instructions, especially the case where special gasket materials are used.
@psmith1349
5 жыл бұрын
@@WrenchinUpwithJimBates One says use it, another says don't. One says use threadlocker. Another says don't. I don't what to believe. I guess I just go with my gut. Uh, oh. Trouble every time I do that. What's a shade tree to do?
very informative
@WrenchinUpwithJimBates
7 жыл бұрын
Hi - I'm glad you think so. Thanks for watching!
lol---bought a car quest water pump from advanced for a 2000 jaguar xj8--it came with the paper gasket--original gasket was metal--tried to re use metal gasket and leaked so i was kinda forced to use the paper----2 months later its leaking---gonna buy a metal gasket
@WrenchinUpwithJimBates
2 жыл бұрын
Hi - Thanks for watching and sharing your experience with that. Let me know if the metal one solves the issue. I'm sure there are others that would like to know too.
@DonBMW
Жыл бұрын
Get another paper gasket. Clean the surfaces really well. Use a brass brush or green scouring pad if needed. Then apply some Versachem to the block and then the water pump. Place paper gasket on water pump, which will be held on by the versachem. Install pump ensuring to tighten bolts in a cross pattern. Done! No more leaks.
Where can you buy them? Nobody ... I mean nobody has them.
@WrenchinUpwithJimBates
Жыл бұрын
Hi - Thanks for watching! The video was created with a supplier for Advance Auto Parts. If you have not done so, I would suggest that you check with them. You may also want to contact the manufacturer. Their contact information is in the video description.
@jimclifford1241
Жыл бұрын
@@WrenchinUpwithJimBates Wow, thank you for the reply. Since the video is 8 years old, I didn't think I would hear from you. I will try Advance Auto Parts. I did try Fel Pro directly but all they do is refer you to their standard list of retail outlets that carry their products, all of which (except Advance, who I will try today) says they don't have the paper gaskets. Thanks again man!
You never said anything about the Thickness of Water pump gasket material!
@WrenchinUpwithJimBates
2 жыл бұрын
Hi - Thanks for watching! Since that didn't come up in the interview, I suggest that you check with the manufacturer. Their contact information is in the vehicle description.
@deeznutzz101
Жыл бұрын
Shut up stupid
another useless info from Advance auto.
@WrenchinUpwithJimBates
5 жыл бұрын
Hi Louis - Thanks for watching and for your opinion! Would you care to share the reason(s) for your statement with my viewers and I?
@brandongouge
5 жыл бұрын
I found it very informative. I needed this information to help me know what material to buy so I could make my own gaskets instead of ordering and waiting on them.
Total waste of 2 minutes. You talked in vague generalities, and clearly were incapable of communicating useful information. Time to retire.
@WrenchinUpwithJimBates
2 жыл бұрын
Hi - Thanks for watching and sharing your opinion! When can we expect you to publish a video that does a better job of addressing this problem?