Folks are missing the point.This video is for noncarpenters & beginner's. She does a great job.

@seejanedrill

5 жыл бұрын

Thanks, Mark, thank you for recognizing that this video was certainly not intended for those doing production work in the field, but is meant for homeowners doing DIY projects. How I approached this topic for DIY-ers is very different than how I would present it to apprentices.

@carlocarbonaro6686

5 жыл бұрын

Mark Kleffner I was thinking the exact same thing. Leah, you are doing an awesome job!

@gabhm4bbw

5 жыл бұрын

@@carlocarbonaro6686 All of that is fine, but 3rd grade math? Please....

@jimm1819

5 жыл бұрын

@@seejanedrill Good video for beginners, and we are all beginners at one time. Everything you said was correct. there are just different ways to explain it. As an old framer, I'm finding the comments hilarious!

@erikbradford456

5 жыл бұрын

The very spirit of your videos are wonderful. Never stop

As a 35+ year carpenter/furniture builder, I still am amazed at how much knowledge is out there for those who are willing to listen to someone else.

@stevejohnson5477

Жыл бұрын

Often I have worked for people who knew less and that made a real problem for me😢

@stevejohnson5477

Жыл бұрын

You're exactly correct sir often people don't listen to nobody.. it's all in the attitude of willing to receive information over your own knowledge one no knowledge exists in the first place it's a hilarious I've seen people just like that

@lchansocal

10 ай бұрын

I am really amazed that a lot of people are willing to share what they know in KZread. In real life, I meet a lot of so called carpenter don't want to share any. That's why I always have a lot of respect and appreciation of those youtubes.

When Leah says, "You, you can do this," I believe her. She's a cool teacher.

@mikefratz2938

3 жыл бұрын

She waits too much time marking both sides of the stud. She would not be allowed to do that on my job. You make one mark and set the stud on the x. No carpenter carries a framing square in their nail pouch

@ricdonato4328

2 жыл бұрын

@@mikefratz2938 You miss her point, there are many folks not knowing what a framing square is nor how to use it. Thus she is demonstrating one of its many uses. Your "on my job" comment is immaterial to this demonstration video; quite pompous of you. By the way it is not waits, the word you wanted is wastes. Yes, you can use a speed square, or tape measure for laying out studs, neither is the purpose of her video.

@mikefratz2938

2 жыл бұрын

@@ricdonato4328 I don't mean to come across as arrogant but people should know that in using a framing square it lay out studs can easily result in layout being off. If you layout a 50ft wall with a square by the time you get to the end of the wall you will be off. I would never recommend that method. The sure way to be on is to run a tape the entire length of the wall that way you ensure that each stud is exactly where it should be. Never ever measure stud to stud it is bad practice and should not be recommended

I was a handyman (pretty good one, if i do say so myself cause I never had one fail in all of my work and I've seen my work from THIRTY years ago still doing great) and this lady did very well for her target audience. She is a very good teacher and anticipated what people would be confused by and addressed those things in her video. Excellent job with no jerk attitude, which is what I found when I was dealing with workers in the trades all those years. 🙏

I feel like she's the favorite teacher I never knew.

@andygentry3547

4 жыл бұрын

Me too. Calm, comforting demeanour about her.

@krzysiekklejszmit6967

3 жыл бұрын

She's a very, very good teacher, I agree 😄

@BigDsHomestead

3 жыл бұрын

I love watching her and Tom Silva of Ask This Old House.

@jlg8689

3 жыл бұрын

Id pay to be in a carpentry class with her as instructor!

@spencerfranklin4780

3 жыл бұрын

Oh shit thats a chick???

Wow, so I've seen a lot of stuff put together for beginners. I mean lots of stuff. This lady makes the most accessable and, I daresay, most useful beginner videos I've come across. She is like Bob Ross for carpentry!

Leah, you are awesome. You are a teacher's teacher. Your voice is clear and concise, no um's and uh's. Professional and keeping it simple. I wish I had you as my first year instructor. Thank you for empowering folks who are not necessarily handy or knowledgeable. Great work. I love ya

Absolutely the best teacher and mentor I've seen on KZread by far.. I've learned everything I need to know to get started building a shed outside as a father's day gift for my husband in about 30 mins. I never leave comments on videos but I couldn't resist... Leah your blessed at what you do and your real gift is sharing with the masses who would be lost without your tutorials. KEEP UP THE GREAT WORK AND STAY BLESSED. THANK YOU SO MUCH. MISTY SALINAS

As a carpenter of 30 years I know most of your tricks, most, not all so thank you. Being a female carpenter, I find it refreshing and easy to listen to you. A pleasure, good work. Sure is nice to learn new things when you have a passion for your work.

Blessings to you and what your doing, I’ve been a carpenter 35 years and love you to taking me back where I began, and all the people you are patiently teaching to build with there own hands. You will never be hungry when you learn how to make money with your hands. God be with you

@ColonelSandersLite

4 жыл бұрын

Well, unless you loose your hands so you know... Watch out for that. Be smart.

@manguydude287

4 жыл бұрын

Most carpenters I work with go hungry because they blew their money on beer and weed

@williamshepherd2836

4 жыл бұрын

This is true, I learned to work with my hands and trade skills when I was young and have never gone unemployed or hungry unless it was my choice.

@fluorosco

4 жыл бұрын

What a lovely message. 😊

@booboo-nl3wi

4 жыл бұрын

Very true my friend 👍

I know this isn't the video for it but I want to to know that "ticking stick" info was awesome. 👍🏾 Thanks for sharing your work and advice

@ozzyefc44

3 жыл бұрын

The ticking stick video was brilliant 👍

@kimberlyhughes4515

2 жыл бұрын

I loved learning about the ticking stick! What a genius tool!

Jane, you are a great teacher. Many folks can learn by your patience and techniques.

I have been a construction carpenter and building contractor for over forty years. I love people like you who know how to teach apprentices! The catch is finding somebody that only needs to be shown once or twice instead of over and over again! Honestly people have no idea just how many tricks there are in the carpentry trade. Master craftsmen teach many tricks which then gives the tradesman foundation to expand and develop many additional tricks.

@brandiminor1632

Жыл бұрын

I've been a supervisor for 10 years. And not to be a dick but if you have to show someone something like this more than once or twice, you gotta get them out of the door and hire someone that can do the job. It sounds mean but you can tell early on if someone has the aptitude for something like this. There's no reason to waste time trying to teach someone that can't when you could be building a crew that you can count on.

This video was more beginner than I needed, (I can't imagine trying to build a frame if I didn't already know a 2x4 is really a 1.5x3.5!) but honestly hearing Leah say "YOU, YOU CAN DO THIS" at the end of the video is always worth it! Great beginner info and encouraging to keep up with carpentry!

Leah is great at breaking things down, making them simple. Excellent teacher.

Its a shame that they're so many hateful people, that like to put others down because of what they know or look like. What she is doing maybe is helping others to understand and if you have a different way, well more power to you or explain your way, and some others can understand your way. But alot of those who are beginners this maybe easier for them. No need to put down.

@georgegomez3522

5 жыл бұрын

@@trevrockrock16 lmao true super t so very funny true .i was like wow not a single neg!

@Smurphenstein

5 жыл бұрын

Yep, seems people say what they want behind their screens but wouldn't say boo in real life.

@terrypounds6534

5 жыл бұрын

It's mainly because they are miserable people with miserable lives.

@joee7626

5 жыл бұрын

She DOES over-explain things a bit. I know KZread vids have to be a certain length to be monetized, but there's just too much stretching of time for simple concepts.

@Smurphenstein

5 жыл бұрын

@@joee7626 the channel is for novices and beginners though. I have been working with wood, timber, plastic, etc for years and still sometimes learn helpful tips from her channel. Yes, 17 minutes is little long but when I did woodwork or metalwork at school we did an hour class on using simple tools at least.

Thank you for such great videos! As a diy’er, I appreciate the excellent tips and just let your videos run while I happily work on my 40 year old home. My friends come over to use power tools and help rip out a bathroom. Empowering people to take on tasks they didn’t know was possible!

The way you explain everything is golden. You can see the difference right here from the way other pros describe what they do. Not everyone is a carpenter. Not everyone is a teacher. You’re both. Thank you!

Being a DIY with no training and no construction experience, I stumbled upon this the last walls I built. Would have been nice to know 20 years ago. Thanks, keep teaching us the basics, the skills, and the tips and tricks.

I can't tell you how many carpenters I've seen screw up the layout of studs because they're not the ones installing the drywall or siding. I learned this lesson the hard way many years ago. Wish you'd been around then!

@carlcampbell6827

4 жыл бұрын

Yea when the carpenter has to hang the siding, drywall or shear panel, he learns in a hurry how to not screw up stud layout on walls again!

@jamespetrini

4 жыл бұрын

I had a kid working for me and he was famous for when he ran out of tape on a long wall he would set a nail and continue on with pulling centers but would forget to just do 16" and he would pull 151/4 from where he left off so everything after he restarted would be off 3/4" off lol the sheet rockers would take his tool belt during lunch and screw it to the sub floor with a hundred screws they called it being willified when they got a jacked up layout lol

I'm just a DIY kind of guy, so thanks Lea for the video!!! No ones ever showed me how to use a square!!! Much Respect!!! Your an excellent teacher!!!

I love you so much for everything you have taught me. I've never gone to carpentry school, but I'm building vicariously through your videos. Thank you so much !

I love your videos Leah you're so kind and I bet you were a great mentor on your trade. I love that you are spreading knowledge to the masses.

Wish all teachers were like you. SWEET. GODSPEED.

I wanna hug her, she’s so nice!

Again your instructions are clear and concise, most excellent.

You're amazing, Leah! The tone and cadence of your voice are so easy to listen to. I can tell you're a kind, happy person, teaching from your heart. I appreciate your patience!

I know this is an older video, but I wanted to take a moment and let you know how much I appreciate your channel. You keep things understandable, your content is helpful, and I’m very impressed by your channel’s growth. Keep it up!!!

What a delight you are. Former college speech teacher says "A++" on your demonstration speech.

Leah, thanks for doing these videos. I learned ‘in the job’ many years ago. I picked up tips and tricks along the way, but I found that a lot of carpenters either don’t like to share, or maybe don’t really know. I appreciate you taking the time. Excellent for beginners and for sharing s old ones who haven’t done this is a while!

She is absolutely the best teacher....ever....if I had her teaching all the subjects that I had a difficult time with, I feel I would be further ahead of the curve.....much respect...j

Thank you for the carpenter pencil tips. I didn’t know it could be that useful .

Leah, you are Awsome! I've worked in new home construction off and on with my wife's uncle for a few years and you have taught me so much more than he has.

How dare you Leah for teaching me something very cool! Ha ha ha! That framing square trick is amazingly easy. THANKS!

thanks for the video, I don't even do this kind of work, but I like your videos and explanations. Thank you for the time you take to teach.

I never saw a tape measure with "sideways" markings! Genius! I want one! I never even thought to look for one!

Super. This is the first time I discovered you. I can't wait to see the rest of your information. I work at a BigBox store and I will use and promote this . Thanks Again. Good Journey.

Give this woman her own television show. She's fantastic!!

Leah I want to thank you for your informative channel. I haven't done any construction work in almost 30 years. I'm getting ready to remodel my home and your tips and tricks have helped me remember so many things I've forgotten over the years. With your help this job is going to be so much easier! Thank you thank you thank you!💋❤

Leah you are a great teacher... very patient and very GOOD... thank you for your time

Used a framing square for years in my shop. Never knew this! You made me a believer. I'm subscribing!

I enjoy your videos , However as a 35 year Union Carpenter and a tip I learned framing houses prior to joining the Union : You lay both plates flat using the 16 inch tongue , the first layout 15 1/4 in Mark to the right next layouts are all 16 in scribe to the right , by doing this you have your studs on layout and squared off at the same time , This is the fastest way to layout framing. Thank You Hope this is helpful.

@CC-ug3ld

5 жыл бұрын

That's how I messed up one time. Every sheet of plywood missed the third stud.

@deancarsononmusic2792

4 жыл бұрын

#firststud15andaquarterallothers16

My dad was a building contractor for 40+ years. Working with him I've seen him do some amazing things with that framing square. Not looking at it to figure it out. Just turn it around , mark there, turn it again and mark there. When my dad pasted. His hammer and his square are 2 of the things I wanted, and still have and use.

I'm a beginner with 4 houses under my tool belt...EXCELLENT teaching and communication skills. Great skill and now no need for me to carry a small 2x4 scrap in my tool belt...some of you have done that too.

I'm gonna step on the shoulders of these insightful commentators and add that you Leah, would be a brilliant program to launch back into our high schools. Establishing a curriculum in a high school local to you, filming the actual class, receiving educational certification for the program, then remote streaming into a supervised classroom would do more to focus our youth than 10 psychologists trying to convince them that gender is a choice. They can be the gender of the vagina or penis hat they wear. Or some equally narrow psychological divide they're being cajoled into accepting about themselves--one that pushes them further away from members of society. I think you are a rare earth magnet that should be exposed to our youth on a large scale. You are a treasure that I have enjoyed watching this past year. Thank You. 👏🏻👏🏻👏🏻♥️♥️♥️

@g.r.4853

4 жыл бұрын

MY GOD! What are you suggesting?????? Certainly not that students in school should learn something!!!! Something useful, even!!!! You just caused 17 politicians to have a stoke. (Good job) That would mean they have to get their noses out of education where they have zero clue, like medical care and MYOB. Drop this idiotically political brainless opinion "No kid left behind" simply to get votes and screw the county. In my youth (several decades ago) my HS taught SHOP and HOME ECONOMICS. I made a row boat (it actually floated and lasted years) and my sister all are terrific cooks (look at them) [I hope they don't read this]. Shop and my growing up on a farm showed me I can make nearly anything, at least anything the average person needs! You, sir (or ma'm) have a marvelous thought!!!!

New subscriber here. Just starting to FINALLY do wood working and find your videos VERY HELPFUL. Thanks a million!!!

Your carpentry skills as well as your communication skills are a wonderment to behold ! Thank you for your efforts !

In case you missed it..... Her very informative vid on cutting abstract shapes using a "tick stick" is phenomenal....very cool....quite sure their were many experienced carpenters, diy, even professional's that picked up some useful info from that one.....great job. and thank you!

Concerning the time that you spend to make every video which is simple and well explained and the informations that you give us freely , is amazing , A big THANK YOU !!!!!

@seejanedrill

6 жыл бұрын

you're very welcome!

@charlieking6424

5 жыл бұрын

Jane, you have helped me 'very many' times!*~* Even my sons Sam 12 & Ben 14 love your almost "Moron-Proof" videos*~* Meanwhile, we are still trying to explain to (Dad) the difference between a Phillips-head vs a Flat-head by asking him for the Plus or the Minus screwdriver*~*

@victorcastle1840

5 жыл бұрын

Charlie King , It should be, she explained it for kindergarten kids, other wise it would have been a 1 1/2 minute video :-(

@charlieking6424

5 жыл бұрын

@@victorcastle1840 my mom wrote that and she's weird sometomes

@charlieking6424

5 жыл бұрын

@@victorcastle1840 and I don't rly like the vids

Well done. Thank you for the tip. I'm glad I mean into your channel. Very handy tips. Thanks again 😀

I really appreciate how she gets right into the matter at hand. A similar video by anyone else would have been at least twice as long, without any additional information being conveyed.

Well...I gotta say...you taught me another good trick. You know, I never realized why one side of the framing square was narrower than the other one, but it makes perfect since. Thanks Leah for the great tip. You're a natural teacher. I've just laid out the top and bottom plates with the 16 inch centers hash mark and lined the imaginary centerline on the stud, in on it. Your way gives a line on both sides. 6 of one and half a dozen of the other...it was the way I was taught, over 50 years ago. THANKS

Leah you're awesome. I do a lot of carpentry work around my home. Your videos are very interesting and helpful. Thank you

Thank you!! You make me feel like "I can do-it!" 😊

@markmurto

4 жыл бұрын

Special needs education. Hey it really works!

TY for this your explanations are so clear and focused. I am going to build a small shop shed and this will be my first time framing. I have owned a framing square for years but never knew the “secret” feature ! Thank you for taking me from ignorance to knowledge🙏🏻. Also your video on cut off switches in air compressors was a massive help and a Craigslist free non working compressor has been serving me faithfully for a year or two now. TY

Thanks Leah. I appreciate the time you take to explain things to us beginners. You're a great teacher.

you've done it again Leah... you have taught me something...

@seejanedrill

6 жыл бұрын

🙂

@davetaylor2449

6 жыл бұрын

If your carpentry skill level are love enough that you need this kind of low level help, you should not be handling any tool what so ever.

These videos should come with accreditation. These are valuable lessons.

I love this channel. You have helped me with alot of projects. Thank you.

BRILLIANT. No doubt as to why you have millions of views on your videos. You are a total Rockstar.

There it is from the Oracle, "production and moving very very quickly" production pays. Preach it!

You are such a talent. you are one of the very few I click the thumb up, even before watching the video. Many have the knowledge but the skill and art of communicating it to the viewer is a totally different talent which you most definitely have. BTW: Have you thought about opening a workshop for DIY enthusiasts around you?

@seejanedrill

6 жыл бұрын

Thank you so much, Leane! And yes, I have considered it for the future, however, See Jane Drill keeps me pretty busy!

@storungz

6 жыл бұрын

Thank you Leane for your concise comment-exactly what I was thinking as I am relatively new to this channel but every video I have seen I learn so much more then just the topic being presented. Leah, I love how expound just enough ensuring the viewer has a very clear picture of what you are explaining, and for a beginner like me, I'm saying "ohhhhh that's what that's called" so much! haha Cheers!

@leanegarden6997

6 жыл бұрын

I'm glad that we agree that Leah is a great professional at what she's doing and really great communicator as well.

@LH4gat

5 жыл бұрын

@@leanegarden6997 As a beginner I particularly like the way she is carefully explaining not just what to do but why it works. I am the type of adult learner that needs to know "the why" in order to remember "the how". She is so talented as a teacher that I wonder if maybe that must be what she also does also in her 'other life'-? Seejanedrill's videos are some of the best out there for the beginner, especially the timid beginner.Instead of feeling (like with a lot of You Tuber's)instead of feeling like she is just showing off how much she knows, she is actually teaching in manageable steps and empowering the newbie to learn, retain the info, use it and progress. This is what a true teacher does. Great mentor. Jane, Keep the videos coming! You have broken down stuff that I was struggling to grasp where others only caused more confusion. Your heart and talent is apparent in every video!

I have just found this channel and love it. Thank you for the information that makes sense immediately. Must admit I also use the framing square to square up my quilts. So to me it is a multi use tool. 😊

I always follow your tutorials...ive learned so much...im.working on an old house thats 160 yrs old...thank you

You rock Leah. I always get something from your videos. Keep them coming!!

I love this women! Great videos keep up with the great content. I hate reading and I dont feel like buying a construction for dummies book your teaching me thx.

you have taught me more in a few videos than I would have learned from any other person who I've worked with.Thank You!

I'm 39, I was a gofer in high school for a summer I never learned this.. you have passed a long a lot of good information. Thank you!

Great info! Thanks for teaching us the usefulness of this tool!

Wow i never knew that about the square. Wish I knew that when I was framing my wall in a while back.

As always, great video. I'm new and didn't know it was called tongue. Cool THX

I have seen two of Leah's videos and I always learn a lot and I have been doing carpentry for many years, there is one tip I would like to add, the tongue is 16 inches and it can be used to measure the space between the studs faster than a tape measure.

The comments remind me of many I have received over 30 years by those who don’t consider what this video is, it’s for novices and not people with 30 years of experience. I made perfect scores in geometry many years ago and I watched just to see what I might learn. Wasn’t the framing square invented long before tape measures? Next we will see popular book writers entering 1st grade classes and telling kids not to use so many e’s when they write... :) Can any of the posters compete with the best Japanese woodworkers? They make US construction techniques look crude.

You have a knack of explaining thins so clearly and completely. You’re also very nice to listen to - gentle, not brash or boisterous. Makes for a nice, pleasant experience. Thanks for the info. Keep up the good work.

@seejanedrill

6 жыл бұрын

🙂

@markbrown2781

5 жыл бұрын

if you actually wanted to know the reason why she would have explained it BETTER. she left out info

@mrwatcher

5 жыл бұрын

Snow flake. Nails are probably too pokey for you.

What a great communicator and instructor you are Leah. And your trade knowledge and use of tools is exceptional and the way you deliver the information is concise and spot on. you have Certainly taught me something. not just about the use of a carpenters square, but about communicating information to others.

Fantastic videos. Thank you for all you do for us. I learn something new in every video you make. You rock Leah!!

Another great video! Back in the 1960s, a 2X4 was 1-5/8" X 3-3/4". If I remember right...

@StraightThread

6 жыл бұрын

Per the 1964 American Lumber Standards www.fpl.fs.fed.us/documnts/misc/miscpub_6409.pdf

@Roonasaur

5 жыл бұрын

And, once upon a time, they were actually 2" by 4" . . .

@martinkerker1190

5 жыл бұрын

2"X4" planed or rough cut? probably didn't bother to plane construction studs back then.

@Mike_H76

5 жыл бұрын

90's in NY all of our framing members were 1-5/8" from any lumbar yard on Long Island. Aside from TJI's, Anthony powerbeams, etc. I've noticed Home Depot crap tends to be 1-1/2 on the mark, but we never used HD on multi-million dollar Hamptons "homes". Things are done differently all over the country, even locally from job to job. But most every framer I've seen here, uses stacked plates (all three, top two nailed together, then pinned to the nailed down floor plate. Mark top and outside edge, untack, pull back the top two and frame it up, Kings, jacks, headers included, Kept "keying" in the walls perfect. Seems everyone here is a "journeyman" also.

@extremetasks52

5 жыл бұрын

@@Mike_H76 wonder if they actually know what being a true "journeyman" entails .....ie. traveling ,working for free to obtain experience and knowledge in your trade ..... I often work with true German journeymen that pass through Nimbin and the are intensely skilled and extremely humble.

Great job as always Leah!

I didn't know anything about carpentry til I discovered your channel and because of you I'm remodeling my house!!! I'm 62 too!!! Love ya and thanks!!!

You seem like he would be a very encouraging teacher and employer. I wish I had someone like you to teach me how to use tools I was so calm and walk through details. Keep making videos and keep teaching. The world needs more people like you. Thank you

@seejanedrill

4 жыл бұрын

Thank you

The very beginning always makes me laugh so hard: “ugh, framing square..?”

You should do a quick video on how to easily find stud centers inside the wall!

I put down 12 in. square vinyl tile in my Den but of course NOT until I watched one of your videos. I would have never figured out the easy way to cut the tile against a not so straight wall. You are a time and life saver. Your videos are wonderful. Thank you very much for your help and sharing your knowledge.

Brilliant. Thank you for this. I'm not a trained carpenter, so I have developed my own tricks. For a frame like this, I cut a piece of two by four that fits the gap between the studs and use it to set out all the studs.

I love your videos! Just wanna say, when your'e measuring center to center, you're eyeing out the center of the stud. You should measure the front side of one stud to the front side of the next stud. That will give you dead center as well, and is easier to line up the front side with the tape, rather than an unmarked middle of the 2x4.

Another great video, Leah. You have a very good speaking style, and are a good teacher. Not many people could make an 8 minute video about framing squares hold the viewer's attention, buy you can. Thanks!

@seejanedrill

6 жыл бұрын

you're welcome, Jim, and thanks!

@cprice1

6 жыл бұрын

You're right! I honestly had to look back up at the video because I didn't believe it was that long!

You would make a great teacher at a trade school. My friend Bob taught me this back in '95 when I got layed off from my previous job, and I worked for him until 2008.

This lady is very thorough. She makes an excellent teacher. There's also something very soothing about her personality and voice lol

You are wonderful, your voice makes me wish you were my teacher in high school.

Now I know why my drywall didn't hit the center of my stud. Always appreciate your videos!

I think Leah did a great job here, providing instructions in a way that the viewer who has never done framing can understand. Great reinforcement of key principles, as former Instructor (entirely different subject) I know that is what is needed to (1. help people remember and (2. start with the basics or building blocks. I think if I was in this profession, I'd appreciate the fact that someone like Leah is attracting interest to it by making it easy for everyday folks to understand. This is a great place for budding backyard 'framers' like myself to start out to do smaller framing jobs around the house and leave the bigger jobs to the Pros like Leah.

I love listening to her. She's a great teacher!

Always wondered why the different widths on the framing square. Now I know, cool. Thanks again Leah.😀

@seejanedrill

6 жыл бұрын

you're very welcome, Jimmy!

I think this does a good job of explaining how to layout it for a beginner, although I personally just use a tape like she did and then add a hatch on the correct side and only mark the inside edge of the stud I don't need 2 lines, also a framing square is a bit clumsy for a basic head and sole plate. Nothing wrong just different I guess

Way to go Leah. Enjoyed the educational video. I am approaching 62 and never knew this. A framing square is probably among the first 5 tools purchased. I also enjoyed the video about the carpenters pencil.

I've watched 3 of seejanedrill videos and did not regret the time invested. The ticking stick video was great. I've never seen a carpenter use one or heard of it. Excellent job actually teaching novices and those of us who just want to increase our knowledge of everything. Great job.

You are left handed like me. I love your channel already!

Just mark one side n put a x for stud location is a lot faster🖒

@PoorlyPlayingMagic

6 жыл бұрын

That's the way it's done in the field. Unless you're doing the marking and some complete zombie newbie is doing the nailing, you don't don't need to make an outline of the stud, just mark on side and mark a tic on which side of the line the stud goes.

@sorenjensen3863

6 жыл бұрын

Just made this exact same comment lol. Guess I should read others first in future

@jcviaene

6 жыл бұрын

Shaun Roark exactly and using a framing square could end up in an error if you go down 20 or 25 feet down the line.. .. just being off the thickness of a pencil line could throw you off by an inch in 25 ft... And the drywall will miss the studs. Using the tape measure, just backing off 3/4 of an inch at every stud is much more accurate and consistent,,,, and faster

@robertbutler8004

5 жыл бұрын

@@jcviaene How does the drywall miss the studs if the sheets are fitted horizontal?

@mannysabir1339

5 жыл бұрын

Yup, just wrote that

Love your laymen discussion, used your video to show my non carpenter family. Love this vid.

Leah, love your videos. Please let me add something that saves me hours of measuring -- and it works every single time. say you are building a simple wall. (BEFORE YOU START TO BUILD, make sure the studs are not bowed, curved, or warped. These conditions will guarantee a built-in build failure. You have to think ahead - if the framing is not square, the wallboard will not attach flat on the studs. This will be evident in wavy crown molding and baseboard when they are installed.)Lay out the wall studs parallel to each other on the ground. Nail the left wall stud to the base stud (either toenailed or through the base stud into the bottom (end ) of the first wall stud.Next, cut a 2x4 spacer to 14-1/2" long. This is the distance between the surfaces of two 2x4s that are 16" on center. Place this on the base 2x4 abutting the left wall stud. Abut the second wall stud to the end of the 14-1/2" spacer, and nail it in place. [BONUS: no matter how good you are, the second wall stud will not move if its toenailed, resulting in accurate placement of the studs.]Continue nailing studs to the base. Add a single header nailed at both ends and separate the intermediate wall studs with the 14-1'2" spacer.Raise the completed wall and square it away (Many people do this on the ground. I prefer to do it when the wall section is raised because in my humble opinion it produces a more accurate product.).What I do is cut three or four spacers from scrap lumber. this speeds up the assembly.Thank you for your patience with me, and I hope my input is of value to somebody.