Fun fact, this is the only person who makes bumper plates and that's why they're so expensive

@alphasaiyan5760

3 жыл бұрын

I was gonna say and that’s why they cost so damn much lol

@peterlustig9751

3 жыл бұрын

Sometimes there where two persons!

@aWatchmanOnTheWall

3 жыл бұрын

Lmao

@georgeemil3618

3 жыл бұрын

Only a matter of time some hot-shot manager is going to look for ways to cut costs, look for efficiencies and and perform a time-study of the entire process.

@grzesiek1x

3 жыл бұрын

they probably buy them for a few dollars there and sell it for 10 times more

Now i know why i have been waiting 5 months for a set

The cost of a 45 lb plate is insane right now.

@lonewolf604

4 жыл бұрын

I personally want to strangle all the facebook/craigslist sellers right now

@calebpardy3160

3 жыл бұрын

A good alternative is old truck brakes, if you know anyone who works in a shope they might have some and they can get up to 30lbs

@WuhTF

3 жыл бұрын

@@lonewolf604 me too, them fucker buying ti all up and reselling them for double the pricing. I'm still on wait-list looking for plates 🤦

@amar9614

3 жыл бұрын

Concrete weight plates are pretty cheap and strong enough (except when you drop them from OHP height)

@Niko..

3 жыл бұрын

you can't afford my finest plates traveler

Man that is a tremendously manual process, I'm surprised they aren't more expensive. Oh, right, Chinese labor. When do you add the Rogue/Titan/Rep/Ivanko/American Barbell name?

@Febreze99

3 жыл бұрын

I think Rogue is in house manufacturing

@TheLondonCyclist

3 жыл бұрын

@@Febreze99 Yeah, right lol

@repps1464

3 жыл бұрын

@@Febreze99 they only make barbells in the US. Everything else, China

@Netrool

3 жыл бұрын

@@Febreze99 nah, i bet the same guy in this video are making one for Rogues

@lastfirst2241

3 жыл бұрын

@@Febreze99 Rogue bumpers are made overseas. I think the only plates they have made in the US are the newer deep dish plates.

Great Handwork!

Beautiful job!

this is fine work

Doing this all your life will give you forearms like steel.

@goldman7267

3 жыл бұрын

And lungs like plastic

@MaxMakerChannel

3 жыл бұрын

And cancer from the mould release spray.

@melin1969

3 жыл бұрын

it took both of them to pick it up so clearly hes either new to the job or your wrong )

@TheScytheMoron

2 жыл бұрын

@@MaxMakerChannel Would not be so sure. Probably just some silicone spray. But yeah NONE would be better than some in your lungs.

@pilapila183

Жыл бұрын

@@melin1969sure you can pick up the plate easily by yourself a few times. Try doing that over an 8 hour shift and see how far you get

nice work 👍🤟🤘

Damn broh... Great content

Nice work

Quarantine is rubbing it down

The color is bomb

Much respect for the hours of labor involved. Pay the man. I just wish this was done in the USA.

Cuanta belleza 😍

Que hermoso mi sueño es tener uno de esos

Superb.

Y esos discos dónde se consiguen, costos..?

Que costo tienen? Para la ciudad de México

Super bro

Nice work pinny 😁

@Raptormeatx

3 жыл бұрын

Who Pinny ?

livin the dream

كيفاش تحرق اادهون بلاما تطيح العضلات

What is the yellow liquid spilled?

Thanks for the vedio , if you sell it , how can i contact you please ?

nice, what brands do you produce for ?

@chuckyfox9284

2 жыл бұрын

I‘d guess domestic.

and then they do that 100,000 times

Wow

steady

osm

I thought bumpers were solid rubber all throughout minus the center hub?

I like plate

Ppl are taking about that labour hardwork that's cute .

Great tip about what not to purchase, thanks!

@ozmobozo

2 жыл бұрын

Iron plates are all you need really. They're cheap and basically indestructible. If you need to prevent fall damage to the floor then there's bumper plates.

Qual é o investimento numa máquina dessa ?🤩🇧🇷🏋️‍♂️💰💲💰🤸‍♂️🤸‍♀️🙏

👌❤

Seeing this on my recommendation page while my state is in lockdown.. AGAIN! sucks💀👎🏾 should’ve bought bumper plates when I had the chance smfh

Amazing🤭🤭🤭🤭

Sent an email for an inquiry! Awesome video

@chinamantafitness5636

4 жыл бұрын

Thanks for your interest in Manta Fitness!

@doomdarkknight4138

4 жыл бұрын

Ivan Tirado are theses cheeper than normal prices

@ivantirado8233

4 жыл бұрын

[DOOM]DarkKnight I don’t know they haven’t responded via email

@apeelvis

3 жыл бұрын

@@ivantirado8233 Typically with these chinese manufacturers the cost of the plate is reasonable. The cost of shipping is insane.

돈이 없어서 못 샀는데.... 이유가 있었구나 ㅋㅋ

Big bicep

Keep posting please

I want to start who will provide know how

You could live here in Brazil, here many people buy to set up their own gym at home. Is it possible to deliver to other countries?

@chinamantafitness5636

4 жыл бұрын

Yes we can ship to Brazil, please send mail to sales@mtrolls.com if you want to distribute our products locally.

@thiago_mariani

3 жыл бұрын

Daniel você chegou a comprar? Também sou do Brasil.

@guihsw7133

3 жыл бұрын

Também tenho interesse

Please give it to me, I'm in love with it now.

Dude to be fair, that looks pretty damn good. And the weights that China is producing are pretty damn high quality these days. But, still. If I am paying $3/lb I want my shit made in the USA.

@hamedhaidari8658

2 жыл бұрын

Find scrap metals with high density (steel preferably), cast them and make your own plates, I was going to make plates with aluminum but its not worth tbh, the sad part is aluminum is light but the good part is it's low melting point 660C and much easier to melt even with average camping fire, while steel is 1500C and requires a proper furnace. that other guy mentioned make plates with concrete, unfortunately it will make a mess and high chance it'll break apart. a good source of metal would be car rims, a lot of people want to get rid of their old rims, so if you can find any, cut it into smaller pieces and cast your own plates ez. average rim weight is +10kg which makes it a sick source of metal to create plates. if you ever made weight plates out of scrap metal by yourself, feel free to share your experience (tips&tricks, things to avoid and exct..)

@miracleman8022

2 жыл бұрын

Well then maybe you should open a factory and recruit college kids to do this

@meruem6995ujjoooo

Жыл бұрын

I belive then they would have no incentive to producer.

👍

Do you have any European Wherhouse??

@baishya775

4 жыл бұрын

Did you mean whorehouse? /s

Wonderful. WTF were they making?

Damn it takes forever to make one plate

I want to buy plates

What material color yellow in video ???

@chinamantafitness5636

4 жыл бұрын

hi Nyobain, it's urethane

@bryz5232

4 жыл бұрын

Shore hardness?

Me envia seu contato quero esse produto?🇧🇷

Quisiera saber el nombre de ese líquido amarillo, parece pintura?

@ELIZABETHSANCHEZ-eu8mr

4 ай бұрын

Yo también jajaja

He needs to start doing some overtime.

Price?

but where is weight and logo ?

The amount of labour involved is the reason they are so expensive!

Вроде технология не сложная, а стоит космических денег.

what is the name of the machine? I'm looking to buy one.

@kalihitino

3 жыл бұрын

Hydraulic press

@SpartanThe300th

3 жыл бұрын

😂

Hi what is the Curing time Shore Hardness Elongation Viscosity of the pu rubber

@breakingtoast2255

3 жыл бұрын

Yes

@sasproductions701

3 жыл бұрын

i know this guy uses a consistent amount of mixture in a container, but has to keep tapping it to see if its fully dry and ready. that part bugged me.

I would like to know the name of that yellow liquid please? looks like paint

@jiangdaniel5655

2 жыл бұрын

polyurethane

@jacobramirez4894

5 ай бұрын

Egg yolk

Damn that’s the most messy workshop I’ve ever seen

Wow that’s like $10,000

How much to make bumper plates in China And sell for a fortune?

@teslavoisier943

4 жыл бұрын

I looked up on taobao a Chinese shopping set and a single 20kg bumper plate costs RMB 220 in China. That’s about £25.

@teslavoisier943

4 жыл бұрын

Unfortunately our friend donkey trump will increase the tariff more so the price in the US should not go down in a short time

@matthewhodes1908

3 жыл бұрын

@@teslavoisier943 the problem is shipping costs it's ridiculous

Price

이정도면 거의 수제네..

I would lift that plate.

no gooooooood nooooooo gooooooooooood

Wholesale PU Bumper Plates made in China: (Custom LOGO is available) www.alohamuscle.com/urethane-bumper-plates/

This stuff is so high tech that there’s not a plant in America that can make this. Even plain metal dumbbells are so difficult to make that they have to come from China.

Didn't know bumper plates were made out of egg yolk!

@Aichiever23

2 жыл бұрын

they actually do that for the extra protein.

you sure it's not a kitchen?

forbidden pancake

No wonder they are always out of stock

И здесь Китай!!😂

@mrbasfed1948

Ай бұрын

Сделай лучше и/или дешевле.

Find scrap metals with high density (steel preferably), cast them and make your own plates, I was going to make plates with aluminum but its not worth tbh, the sad part is aluminum is light but the good part is it's low melting point 660C and much easier to melt even with average camping fire, while steel is 1500C and requires a proper furnace. that other guy mentioned make plates with concrete, unfortunately it will make a mess and high chance it'll break apart. a good source of metal would be car rims, a lot of people want to get rid of their old rims, so if you can find any, cut it into smaller pieces and cast your own plates ez. average rim weight is +10kg which makes it a sick source of metal to create plates. if you ever made weight plates out of scrap metal by yourself, feel free to share your experience (tips&tricks, things to avoid and exct..)

That process looks so inefficient.

They don’t weigh similar if done such manually !

Nice process, but fake bumpers. They put iron inside instead of all rubber!

@ThatsGoodMoneyy

3 жыл бұрын

Bruh

So that's why they cost a fortune.

Looks like a big iron hamburger with melted cheddar

Proudly made near Tiananmen Square in Peoples Republic of China by kids

This is a joke. Cant they make this process more cost/time efficient ?

With free corona na ?

@TheGreatShawnY

3 жыл бұрын

Nah, corona is rare in China now, might have to import from the states to keep the cost low.

wtf is a Bumper Weight Plate????

I’m currently selling my kidney for a pair of those

So lifting weights is supposed to make you bigger and stronger... these guys make and lift these weights all day long for a work week. How are they not huge!!??

@SpartanThe300th

3 жыл бұрын

Nutrition. You don't get bigger when you lift (that tears your muscles). You get bigger when you eat, rest & sleep.

@mr.x.workout1902

3 жыл бұрын

@@SpartanThe300th no even though you eat, rest right, if you don't progressiv overloead, you won't grow bigger and thses guys lifting the same wieght or intensity everyday, that's why they stuck !

@naptownfireman

2 жыл бұрын

Need juice bro.

@Milliardo5

2 жыл бұрын

Just because you lift things doesn't mean you'll have a good physique. As an example, compare a bodybuilder to a powerlifter. Also these guys here aren't lifting according to form or technique, which is essential to build muscles the right way. Everything has to go together: form, technique, nutrition, progressive overload, and for some even gear.

Monkey business. Why not inject into mold?

Such primitive looking manufacturing. Why can't we automate this in the USA?

Why would I buy anything made in China when I can buy it from anywhere else in the world? Poor craftsmanship in this video.

@agent99._.53

3 жыл бұрын

Because it’s cheap and good luck finding bumper plates made outside of China the job is hard and dirty would probably be illegal here

Don’t try this at home 🤣😂

It's fake!

Wow lovely

Thanks for the vedio , if you sell it , how can i contact you please ?

@chinamantafitness5636

3 жыл бұрын

hi Ibrahim, please contact Manta sales team by: sales@mtrolls.com, thanks for your interest in China Manta Fitness!