Love Carbon Fiber? Of course you do. Get a carbon fiber wallet here: www.SimplyCarbonFiber.com/RichRebuilds Use Code “RR10” for 10% off your order

@_john_rick_

2 жыл бұрын

I like fake carbon rich, you know its hard out here for a pimp.

@alonzo6488

2 жыл бұрын

Rich can u add a alternator or alternators to a Tesla an have it charged it self while driving an have a switch or button to turn on an off the charging part to when ever u need it ?

@jacobthompson8022

2 жыл бұрын

Yea utitiyyt even f I

@Rob....

2 жыл бұрын

Is there a place were I can buy on of these? because ita small so It would fit where i would need it to go.

Glad you added the lights to illuminate the back of the blade! Great vid guys!

@dalejrjunior1298

2 жыл бұрын

lmao fr need to put a cage on it and mount the lights up there. or corner poles on the blade with lights on them

@Jaycren86

Жыл бұрын

“It's for Scale”

You guys are always on point for fun and entertainment! Thanks!

Important note guys, since the governer was removed, the stock cast iron con rod and flywheel can't handle anything past like 5.5k rpm, so if you are planning on redlining this bad boy, you need to upgrade both the flywheel and the con rod to billet aluminum or you will get funky engine failure. Sick minidozer!

@boulderdashcci

2 жыл бұрын

@Jim jibroni I've seen small engines throw the rod through the side of block. I wouldn't want to be sitting on this thing when that happens lol

@TheRvg03gt

2 жыл бұрын

Bullshit.. I spin mine to 10k with NOS

@criznitty

2 жыл бұрын

@@TheRvg03gt ⚠️ WARNING!!! DANGER TO MANIFOLD ⚠️

@josephmusseau797

2 жыл бұрын

Oh the sound of that chevy..... Prime

@josephmusseau797

2 жыл бұрын

Don't care what it's made of where it comes from or how small it is... I would use the shit outta this

Nice to see Tonka still in business, cool upgrades too. It'll be great for shoveling the driveway in the winter.

Now how on earth are you gonna build that into a Killdozer? Marvin Heemeyer is looking down on you and shaking his head.

@monkeyearcheese420

2 жыл бұрын

tickle dozer

@testaccountusa4828

2 жыл бұрын

That man was a genius.

@alfonsoalonzo

2 жыл бұрын

handwork determination stubbornness and a lot of welding wire and a certain level of disdain towards your local GOVT

@alfonsoalonzo

2 жыл бұрын

@Kiri Tiatia Otaraua O'C-TX5 are you talking about the man who was repeatedly screwed over by his local GOVT do in revenge destroyed the property of those who screwed him not hurting anyone but himself because the dude was not a weirdo just a hard working man who had enough

@testaccountusa4828

2 жыл бұрын

@@alfonsoalonzo Precisely.

The fan was probably offset to blow away exhaust (either fumes or dissipate heat) as it's on the same side PS that's a Sharpie for scale (dozer stands on a standard pallet) *wink*

@wobblysauce

2 жыл бұрын

The exhaust was on the left side, and the fan was on the right side.

@llortaton2834

2 жыл бұрын

It's blowing air in, dissipating heat, when you can see the wires and the sticker / skeleton of the fan, that means the fan is pulling air toward you, otherwise you would see the fins directly and not the motor/sticker of the fan.

I can watch these two muppets do ANYTHING

UNLIMITED POWER ✋⚡

Absolutely love the off the charts originality of the content, laughed until internally damaged with the Dozer Safety Dance bit at the end. Clip here: kzread.infoUgkx1iBdRbR0IVdHkdK_vAE5nVK0w0MQTkLh Thanks for bringing so much happiness!

12:00 Hahahaha. Love how the engine is still cranking as you are already out of the car. Even the ads are funny on this channel.

The Kill dozer Jr build was awesome! Agreed upgrade to the rubber tracks and let see if can tow something lol

This tiny bulldozer project was awesome! Thanks Uncle Rich! 😎💯

Dad had one when I was a kid. Biggest problem was tracks breaking or coming off due to no idlers. Put thousands of hours on it snow plowing and pulling wood out of the woods

We, the Rich Rebuilds community, love when Uncle Rich and Stevon are having fun! However, with all the notifications, we believe there is no chance of heating up someone's cookie. Lol!

The lights that only shine on the back of the front blade and Stevon clearly wearing a hat for the recorder music interlude made this an instant winner.

I'll tell you what, Stevon looked just absolutely majestic on that thing.

@allanjones8382

2 жыл бұрын

I couldn’t agree more lol

@bradsheridan8658

2 жыл бұрын

The hair!

@toddclancy5237

2 жыл бұрын

I love these two and all their antics

@RonniePTexan

2 жыл бұрын

@@bradsheridan8658 Mullet just flowing in the wind! Lol

Thank you for The Safety Dance and the fleshlight for size reference so I can relate.

Ha! The tag on his Chevy says HNIC! I love Rich's sense of humor.

The most ironic part of the outro song, The Safety Dance, is this might be just the most unsafe thing they have ever done

Such a cool toy to have !!!! The key to it lasting and not blowing belts chains sprockets is lower throttle while driving amd turning only higher throttle in straight applications

I love how the jump pack is at 99% after the start

THE FLUTE brings me back every time!

RRB is by far the best automotive/things with motors channel on youtube... most new, original, entertaining ideas, great comedy, no script, doesn't try hard, etc. Truly one of the best creators.

Having grown up in Cedarburg, WI I was surprised to learn this company was (and remains) there. The city is far better-known in the region for seasonal festivals and kitschy antique shops. I think the city's biggest claim to manufacturing fame were Mercury Marine's 3 EPA superfund cleanup sites.

@sofaking1102

2 жыл бұрын

Bought my first motorcycle in Cedarburg a few years ago

This is what happens when Rich and Steveon need to make content and waiting for parts for the other projects. They just never let us down.

My reaction to the thumbnail was "Sweet, a Magnatrac!" As a kid I would daydream driving one every time I find their ads in Popular Mechanics! Damn, what a find!

This is not what I was expecting. Also, this is exactly what I was expecting. lol

I was the poor son of school teachers in a town full of lawyers, doctors and grocery/doughnut magnates. So when I joined the Boy Scouts in a vain attempt to honor my father, all of the scout leaders were lawyers, doctors and grocery/doughnut magnates. I learned pretty much nothing and the only time that we went camping was car camping at Camp Penelton in So-Cal where we found live explosives on the beach. But there were dolphins surfing, so it was kinda OK. After that I forgot to go to the weekly meetings for an entire month and realized that I should just quit. I bought a sweet book about knots and never looked back.

@boxeclectic

2 жыл бұрын

I too, wished to honor my father. ( still chasing that dream )

2:24 "It looked bigger in photos." That's what she said!

Had one of those Fanttik jump packs for over a year. It's top notch. It's great when a neighbor or co-worker needs a jump, just hand it to them instead of the jumper cable dance.

Rich and Stevon are the funniest. That is all.

@lateefcarrere1649

2 жыл бұрын

Facts.

Stevon looks appropriate on that.

You guys are always funny... I like your humor, but this was some of the stupidest shit I've ever seen y'all do... and I gotta say I love it... this one gave me several proper belly laughs... keep up the good work gents

Steven’s a genius .. this thing would be PERFECT for commercial walkway clearing .. I used to do snow removal, and some commercial buildings can have literally kilometres of walkways, and a lot of the time they’re made from interlocking stone that becomes uneven from frost heave, so using a snowblower, your edge catches every 2-3 feet and you end up slamming the snowblower into your pelvis, same thing with a shovel as well.. if you put a piece of pvc tubing on the cutting edge of this thing, it would clear walkways like a dream .. you could actually make quite a bit of money off this thing just talking walkway contracts

That intro, with Rich struggling to park, reminded me of the Peugeot driver Tog Gear episode: all the room in the world and yet manage to hit something. Hahaha!

As a Tuktuk owner, can we talk about the red Tuktuk next door, and why you haven't made an electric one yet?

the 3 second killdozer clip was absolutely hilarious

Playing "Safety Dance" while wearing Crocs during mini-dozer operations: epic. I can't help but feel that solar panel is gonna get broken off. Imma gonna have to hit up that Facebook page! ;)

My business partner's dad built one of these, yes, they come as a kit. After he got it together he was looking for something to test it against. So he put against the big (3foot diameter) elm tree just to see if the tracks would spin. Pushed the tree over! His wife was pissed! Took out all the shade for their backyard... LOL

Rich needs a "Binford Tools" tshirt.

I like the license plate. I'm surprised it got past the censors.

OK RICH don't let us down this winter, lets see some snow plowing vids with this thing.

The more I see Stevon in action and hear what he has to say, the better I like him. He's an "almost Eagle scout", and that's fine by me!

Idk how I never found your channel sooner cuz I love the content iv been watching every video since I love how you guys make a video of watever the fuck you want and don't give a fuck wat anyone thinks or has to say about it I always get a good laugh from it as long as you are having fun then who gives a shit otherwise it being unique and out of the norm is why it's awesome and appealing to watch keep up the great work guys!

The HNIC license plate 😂😂

As usual, fun times, and a fun video to watch! The Struck corporation has been advertising something like "build your own mini bulldozer" in ads in the back of Popular Science and Popular Mechanics magazines for decades. I saw ads for these in the 1970s.

If you like this little bulldozer, you should check out those miniature excavators that Japan is so fond of. When I say “miniature excavator”, I don’t mean something the size of a Bobcat. I’m talking about something roughly the same scale as this bulldozer. Some are even small enough to fit in the back of a kei truck! Kubota and a few other companies make them, but I don’t think they sell too many outside of Asia (where I imagine they make sense in the cramped conditions of their cities). I’ve certainly never seen one in person, at any rate. Add a kei truck with a dump bed, and you’ve got the beginnings of a miniature construction crew. XD

It'd be cool to see a strength test for the bulldozer. Something like pulling dead weight or even see how heavy of a vehicle it can handle.

I’ve always wanted one of those! Amazing! Need more space! FYI you can install coils on it to charge the battery while it’s running. I have a Super Charged Hemi 420cc Swapped Ariens Snow Blower. I ended up using Coils from a Generator bc of heated hand grips!

@build2break

2 жыл бұрын

I’m looking to get my first lawn tractor, what would you suggest as far as something that’s going to last? I’m looking at old used

@pattayperformance

2 жыл бұрын

@@build2break Where are you located? Are you handy? If not…are you willing to learn? What are you looking for in a tractor?

@build2break

2 жыл бұрын

We’ll the “craftsman” push mower I got at the big box store. Has been trust the last couple years this far.. but I quickly realized I have more lawn/ hill then I initially thought. I’m in New England I looked at a kohler powered something last fall, but didn’t pull the trigger on the first thing I saw. I’m in my late twenty’s and trying to be more wise if that makes since. I just want something tried and true, don’t care what color the decal is Handy, I like to think so, although I have many unfinished projects as it is, so what’s one more!?

@pattayperformance

2 жыл бұрын

@@build2break Well if your tractor breaks down your grass still goes! I like AYP/Husqvarna/ariens/craftsman/poulan built tractors

@build2break

2 жыл бұрын

@@pattayperformance in that order?? Or in general, I see many John Deere still going, the older green craftsman, and it seems like a lot of cub cadets

The park service used them for hiking trail maintenance. I found one in Oregon from a federal auction years ago it had a backhoe on it . They used it for digging out houses in national parks .

29:17 🤣🤣 The editing is top notch!

This video started and I literally said “one of my customers make something similar to this”.. then a few minutes in I said “wait a second, my customer is the company that made this thing!” I’ll have to swing over there tomorrow and show them this video

you guys are hilarious, always love the videos. Bless Up from Ontario, Canada

@krisi.2011

2 жыл бұрын

A fellow Ontarian glad canadians are enjoying a great creator

That's really awesome. I've actually been wanting to build myself something like that for my homestead property. I want to learn welding and get set up for that and it will probably be one of my first major projects.

@maaingan

2 жыл бұрын

That would cost so much you might as well just buy a small car from the 90s and put a plow on it

The HNIC on the truck plates 😂

When you guys release a video you always make me wanna buy some junk what other people call "project build" (but soon they realised they know sh!t about how to do) and build something awesome. Fortunately/unfortunately I don't have the space for it. Keep up with these great videos.

now this is some quality content!!!! like always! thanks rich

17:42 aww the glove loves the love glove 💖

Neat little minidozer! That looks like the smallest of the Struck dozers. They're available as a kit. Loved watching you have fun with it. You know, that machine could build a small railroad. ...alright, back to my shovel.

Rich has somehow managed to work in “chocolate starfish” and “balloon knot” I think we know Rich’s favorite category on the hub

@swooshdave

2 жыл бұрын

That Fleshlight ain’t gonna wear out itself.

@jstephens1193

2 жыл бұрын

I'm afraid to ask what a balloon knot is

@swooshdave

2 жыл бұрын

@@jstephens1193 Let’s just say that if you decide to Google it have your Safe Search on.

@Hjerte_Verke

2 жыл бұрын

Are these two guys gay?

I did the same as Steven but worse; I had all the badges and just needed to do the "community project."

@boxeclectic

2 жыл бұрын

Ah yes, the community project. Mine was to make a skate park, but they hated that idea.

This was wayyyy too much fun for you 2 guys!! Still loving the recorder music. Safety dance 💃 was definitely showing your highly performance skills! As always, ❤️🙏🏻💪🏼🔥🔥🔥🤣🤣🤣

You could legit do small dirt work projects like driveway, walkway and sidewalk work at your home. Also as you mentioned plowing snow on your driveway or sidewalk. Plus it's just plain cool.

You guys never stop amazing us, with this projected. Great job!

Sprawled Eagle Scout 🤔

I will say that this soundtrack is academy award worthy and the recorder was 67.4% on point in this episode.

There Rich again with his flashlight! He really loves this thing!

2:45 Folgers Coffee? I knew there was something wrong with you.

How do you find such amazing machined. Never even imagined there would be one.

The driving part in the end felt like it was made by a clinically inzane person, just perfect! 😆 the flute was the icing on the cake.. 🤟

never disappointed with uncle rich and stephen's shit shows. some livestreams would be hilarious lol i can only imagine how yall are unfiltered. love it

Rich loves that Fleshlight 😂

@noahmack_12

2 жыл бұрын

For scale 😂

Great video. Building my own harbor freight go kart so it’s nice to see the little motor get up to 7K rpm’s

@glenmel78

2 жыл бұрын

Go check out Red Beard Garage on YT. They mess with these engines daily and show you how to upgrade them.

@abhimaanmayadam5713

2 жыл бұрын

@@glenmel78 also robot cantina. He's got a build with a 420cc harbor freight engine with a supercharger on it. Madlad stuck it in a Honda insight

@glenmel78

2 жыл бұрын

@@abhimaanmayadam5713 lol, I just watched his last video today. I play with these small engines. Never to the extent of supercharging, just valve springs and rev limiter.

I wait impatiently everyday for this KZread GOD to release a video,the only other humans that get me this excited are JEZZA,HAMSTER and CAPTAIN SLOW

I had a friend build one of those from a kit back in the 1980s. He was really proud of it but before he could use it he dropped dead from a heart attack. This is the first time I've seen one run since then :)

@1pcfred

2 жыл бұрын

Ain't that always how it goes?

The chimney sweep kid took me out. I’m laughing my abs off rn. 😂 14:08

If you replace "blue cheese" with "DUIs" youre pretty spot on.

My 4 Wheel Mountain Bike dozer weight is made out of premanufactured gym machines, it's all manual and is looking for mini dozer snacks lol ! - Nice build !!!

Rich! WTH man! It’s Friday and I’m sitting on my lazy ass scrolling to see if you produced any content. It’s my birthday, how could you let me down like this. 😭

Damn you guys V8 swapping the mars rover now? 😎 You’ve come so far

Childhood dream of owning a Bulldozer came true for Rich 😁😁

That was absolutely stellar! And that🎶 rendition at the end🤣 but no, don’t think I need to see anymore of that “bulldozer/plow”... next

Another gem in the Rich Rebuilds oeuvre. That was a blast. It's the combination of pointlessness and humour that get me every time. And of course flute Safety Dance 🙂

this is the type of stuff im subscribed for, silly, awesome fun.

Always entertaining and always useless, thanks Uncle Rich.

You guys never cease to amaze (amuse) me! Great video.. I need one of those mini-bulldozers SO bad now!! Thanks again

Looks like a lot of fun. Could put a heavy cutting / wear bar at the bottom of the blade, beef up the belts and use it to contour a motocross or atv track.

Would be cool if it was converted to a rc bull dozer

@blackterminal

2 жыл бұрын

And mount a machine gun and donate it to Ukraine

Any thoughts on building an electric go kart with a similar setup to your cyber quad?

This is easily my favourite video on the Chanel, pure entertainment 👏

I'm so happy your KZread channel exists

Add more weight to the tractor to give it more traction.

@wormbo2

2 жыл бұрын

Rich needs a backpack full of rocks and Jumppacks for the next episode!!

This is a Killdozer for guys who are only mildly annoyed by their city council.

@bunjaow

2 жыл бұрын

😂🤣🤣😂🤣🤣🤣

Loving the safety dozer dance, nice!

Thanks Rich! Literally was looking for a jump starter and there you go! Also, make it electric bulldozer!

I only made it to Life Scout also, Stevon.

@boxeclectic

2 жыл бұрын

Look at us, Scouting failures.

Man, even after all the sketchy projects, this seems the most dangerous.

@RonniePTexan

2 жыл бұрын

And one of the best!

By far my favorite video from you guys! Thank you! Your rendition of Safety Dance from Men without Hats was perfect!!!!!

I've got the Struck RS-1000, which is one of the versions they're selling today (I bought mine used). Those are amazing little machines, I can do work with mine that I would otherwise wouldn't be able to do at all - like moving things. I'd suggest a smaller driving pulley on the engine, as it makes it much easier to drive (albeit a bit slower). Hydraulics, rubber tracks, and so on are good improvements. The biggest thing I like about it is that the belt drive is so easy to maintain. Second - I can get into and work in places a riding mower or other similar tool can't get. (It will also go through mud and water and over obstacles unlike anything other I've tried.) I use mine regularly for all sorts of chores.