Love the hidden switch!! Keep up the great videos.

Tito is a handy man. I've been electrician for 40 year now. The new wago is even smaller than these. Another name used is handbrakewago or mistakewago (tabbewago) I will replace the old light with downlighs like this in black. Therwill be a hole in the middle, So I mus use three I think I will use it's ovn switch for the middle light. I will order a remotce cntrol. Here in Norway I use a 4kw Rvtransformer 230v AC50HZ - 120vAC/60Hz for my North American RV. I use both 120v and 230v outlet inside the RV at the campeside with shorepower. Can use converters too.

Those connectors are AWESOME! Thanks for sharing those.

@RVwithTito

4 жыл бұрын

You bet! I love them.

Just upgraded 2 switches with dimmers after watching this. Must say - the WAGO connectors are awesome. Wish I would have known of those years ago. Thanks for the very informative videos.

Superb replacement and job. You are a master craftsman.

Those dimmer lights are sweet! We have a 2019 OutdoorsRV 24RKS travel trailer and are now in the mode of making modifications. The first upgrade happened a couple of weeks ago. I took the plunge and got a Battle Born 100 Ah LiFePO4 battery and installed a lithium compatible Progressive Dynamics converter charger. Everything seems to be working great. It's amazing how fast that battery can charge! Solar is next!

HAVE BEEN WATCHING YOUR VIDIOS FOR A WHILE. YOU MAKE SOME OF THE BEST DIY VIDIOS. ALWAYS INTERESTING TO WATCH. THANKS FOR TAKING THE TIME TO PRODUCE THEM.

@RVwithTito

4 жыл бұрын

You're very welcome. It's difficult at times, but I enjoy doing it. Comments like yours make it worthwhile :)

Dimmer! Wasn't in my radar, but now....! Thanks for the great vid!

I put two of those dimmers in myself. Swapped out the halogen puck lights for dimmable LED’s and we enjoy them much, much more. There had been 7 halogens and they were so bright, it was like being on stage! Plus the heat generated was ridiculous. Now we keep those LEDs powered down low and it’s much more comfortable.

@RVwithTito

3 жыл бұрын

Love those LED pucks. We usually keep them dimmed all the way down. Perfect!

Love your detailed instructions with nice video shots, Great job! Just bought a 2018 24' Coachmen Galleria which seems to have everything, but, I'm sure eventually I will have to modify or add components. I will definitely check out your channel for your easy to understand tips! Thanks so much! Safe travels!

You make it look so easy Brian. Thanks for the info and inspiration.

@RVwithTito

4 жыл бұрын

😎👍

My wife & I just purchased a new (to us) Class C and we are upgrading all kinds of things. I just changed all the bulbs (inside and outside) to LEDs along with changing all the storage locks to barrel-style key locks. Your channel is a great inspiration so keep up the good work!

@RVwithTito

3 жыл бұрын

Wow. You've been busy. I just received some new LED headlights too :)

As always, another awesome video Brian...thanks for sharing!

@RVwithTito

4 жыл бұрын

My pleasure!

Thanks for the tips. I got a Oscillating Multi-Tool a few years ago and have found it is great for cutting holes like you needed for the dimmer!

@RVwithTito

4 жыл бұрын

Next trip to the Depot and I'll pick one up.

Very nice!! Never really thought about dimmers! Thanks for sharing!

@RVwithTito

4 жыл бұрын

Any time!

Really nice project. I will definitely keep these in mind as we go forward. Appreciate your vlog.

@RVwithTito

4 жыл бұрын

Thanks! Glad you enjoyed it. 😆

Great job as usual. So many cool ideas. Thanks.

@RVwithTito

4 жыл бұрын

You're welcome.

I really appreciate your quality videos and your presentation style.

@RVwithTito

4 жыл бұрын

And I appreciate the nice comment and feedback. Thanks!

I like those BUSS bars. Very handy to add circuits to. Nice video 👍🏼

@RVwithTito

4 жыл бұрын

Yes they are very useful. I just buy the large multi pack and use them for everything.

Hi Brian! Been following for a couple years. You are a total inspiration. I had to try your tip on using the alligator clip and wire to divert the water that was running down the side of our class c that drains from our AC. Wow! So simple yet so effective! Also just finished a major floor repair. Had to hit the whole bathroom floor and part of the hallway. I took it in for an estimate at our local rv dealership and they wanted $4000.00 to redo the floor. That didn’t include the leak! Again, encouraged by your video, The total cost after tools and materials $400.00!!!!! Thanks so much. Oh yeah, love the dimmers. May have to do that one too!

@RVwithTito

4 жыл бұрын

Thanks for the comment Steve. I'm so glad you find my projects inspiring. Yeah. I think some (not all) RV repair is a racket...kind of like health insurance. Makes you wonder if they're jacking up the costs for the insurance reimbursement.

I just added the dimming switch to our LED lights in our living room and bedroom, makes a big difference! Only difference is that I sued the smaller switch with a small slide on it. Another GREAT video and very informative, thanks Brian!

@RVwithTito

3 жыл бұрын

Great. I should have grabbed a couple of those smaller ones too. I have a spot for them. Glad you got it done 👍👍

Ah Brian you always make it look so easy.. Nice job

@RVwithTito

4 жыл бұрын

Thanks 👍

Nice lights! Great How To & Review! Thanks For Sharing My Friend!

@RVwithTito

4 жыл бұрын

You bet. Glad you liked it!

Thanks for the tip on the WAGO connectors. I've been using POSI-Locks but these look to be handier. I'm about to install a dual USB port on each side of our RV bed so we can use a simple USB reading light for more focused light than we presently have.

@RVwithTito

4 жыл бұрын

Cool. Yeah I installed a couple USB ports on either side of the bed. Those are a must. You'll like it!

Nice clean install. Love those connectors.

@RVwithTito

4 жыл бұрын

Thanks. Love those too. Almost time to restock.

Love the hidden dimmer switch. WAGO is nice but $$$. They are great to use in places where you will be back into it.

I hope you have added a multi-tool to your toolbox. Makes cutting square holes a breeze.

@RVwithTito

3 жыл бұрын

Yes. I have one now 😄👍

Wow that Looks Amazing...

@RVwithTito

4 жыл бұрын

Thanks. It's going to make a big difference.

Been thinking about doing something like this. I guess you have given me the urge to go ahead and do it.

@RVwithTito

4 жыл бұрын

Great. Not a difficult project. You'll be happy you did it.

I really love your vids. Ever since I discovered your channel I've always looked forward to your vids. You make simple projects so interesting.. thanks for posting.

@RVwithTito

4 жыл бұрын

Glad you like them! I loved what you said "making simple projects interesting". Others have said "making difficult projects look simple". If I combine them, I think I've got a new slogan :) Hmmm.

@bicanoo_magic3452

4 жыл бұрын

@@RVwithTito hahahaha.. brilliant idea!!

Love this idea! I have been wanting a dimmer over our couch, I need the husband look at this & see if he can do this. We already have the lights, just no dimmer.

@RVwithTito

4 жыл бұрын

Glad it was helpful!

Another nice upgrade.

@RVwithTito

2 жыл бұрын

Thanks 👍

I do think you are the Tim Allen of the RV world man. Honestly. Jared and a couple others are pretty good too.

@RVwithTito

4 жыл бұрын

Tim Taylor :) Loved that show. Lots of great folks to get inspiration from. I have my favorites too.

Nice install Brian great idea with the lights and where the dimmer switch is located. Those Wago wire connectors rock, a great bus connector!

@RVwithTito

4 жыл бұрын

Thanks! Yes. Love those connectors. I've used them for lots of projects.

Nice. Those wago's are great!

@RVwithTito

4 жыл бұрын

I think so too!

Nice job looks great . Just put in new spring and hangers on the 5th wheel moryride 3000 !!!! Keep the sunny side up!

@RVwithTito

4 жыл бұрын

That's the plan! Enjoy the smooth ride.

I replaced all my lights with similar to original but daylight LED, always wanted dimmer night light though, will definitly buy the ones you suggested. I have a similar RVAlways wandered the best way to access the space under the cabinet. Thanks!

@RVwithTito

4 жыл бұрын

Yes. Most RV cabinets have that false bottom. Use velcro or small screws to reattach it so you can get in easier the next time.

Great job..and explanation..thanks

@RVwithTito

4 жыл бұрын

You're welcome!

This is our next project. By the by, what wattage or lumin are the puck lights you installed. Best!

Great job!!

@RVwithTito

4 жыл бұрын

Thank you!

Thanks, Brian! I’ve been meaning to ask you about which lights you had. Swapping ours out in on the project list this summer!!

@RVwithTito

4 жыл бұрын

Yeah. All old lights are out...well except for the bathroom. Still deciding what to do there.

Thanks that's a great option to dim.

@RVwithTito

4 жыл бұрын

You're welcome!

Nice job!

@RVwithTito

4 жыл бұрын

Thanks!

Once again another great video Brian! I have a two pole LED's set up, (one switch at the entry way, and another switch in the hallway) Think I could put a dimmer on one of the swtiches and it would still work to dim? Once again, I watch all your video's thanks again for all the tips and idea's over the years. Mark

Nice job Brian! You need one of those oscillating multi-tools for cutting those slots. PC250MT. No drill required, just a few plunge cuts. Thanks for the links to those connectors!

@RVwithTito

4 жыл бұрын

So true. I thought that as I was drilling out that hole. Everytime I need one I say "next time". Checked them out at Home Depot the other day. So maybe I'll have one for the next project.

Nice job and well done as always, thanks for sharing all your work! Can’t beat 12v wiring... worst case scenario I still don’t get electrocuted!🤦🏻‍♂️

@RVwithTito

4 жыл бұрын

Shocking! :)

Great vid. I ordered some non-dimming ones & got ‘em swapped out where I had single bulb housings under 3 different cabinets. Question: Is there something along these lines that can replace the old dual-bulb housing style light fixtures? I have some of those on the ceiling of my Class-C we’d like to replace

Ideal makes Connectors that are like that but are push in (Ideal In-Sure push in Connectors and they also have them just like the Wago that are called Ideal In-Sure Lever Connectors but are a bit cheaper than Wago. Thought you might be interested in them.

Tito, finally a KZread channel that actually does great improvements. Loved your sway bar and Bilstein shook video. Please keep it up!!!

@RVwithTito

4 жыл бұрын

Thanks! Will do! Glad to have you here.

I was hoping you would show how to wire up the 3 wire dimmer switch to the 2 wire lights. Where does the extra wire go?

Nice. Just picked up new Grand Design 310GK, however, all the LED lights in ceiling have particles in the fixtures -:guess the vacuum must not have worked well that day or thought the virus might spread or something. Also noticed a lot of wood particles in cabinets, flooring, cupboards. Especially notices on first trip away from dealer. Any way to safely pull out the LED lights from ceilings and get white cover off to vacuum them clean and put back together? I tried putting in the LCI thin shade for door prepped window, top went in fine, the bottom was difficult, and the latch on lower left broke off...so hoping the three will work, or how to replace the inside of the thin shade windoe

I just told you about my Minnesota Winnie I had already started my list of things I'm going to do and changing the lights out were on the list and that Wago connection is very cool I didn't no about it. I had restoreda 1978 Westfalia that I worked on for two years and I used those puck lights all over it. If you like I can send you pictures from that project I think you will be impressed. So anyway I will be in touch on my solar work. I plan on using your ideas.

@RVwithTito

3 жыл бұрын

Cool. I used to have a 1970 Westfalia.

Thanks, Tito!

@RVwithTito

3 жыл бұрын

You're welcome....tripple comment.

Just installed 2 of these same dimmer switches for the main living and bedroom ceiling lights. Nice upgrade. Way too bright most of the time in stock form.

@RVwithTito

4 жыл бұрын

Agree. Most lights are way too bright for my taste, unless I'm filming a video which needs plenty of light :)

By the way, Tito, love those recliners!

@RVwithTito

3 жыл бұрын

We do too!

I just discovered the Wago connectors about a month ago and now i won’t use anything else. They are simple and work every time. I will be copying your ideas about adding a little electrical tape to provide additional security to the connections. Thanks

@RVwithTito

4 жыл бұрын

Great Robert!

Tito! you usually are so good at explaining things. For me there was too much "abracadabra" with this video...too much that we didn't see and didn't show..just said the words and end result. btw, I do electronics. I'll be able to figure this out but then I wouldn't have watched your video. Those connectors were good to learn about, though. Thank you for that.

@RVwithTito

3 жыл бұрын

Thanks for the feedback. Just sharing lighting upgrade ideas on this one, not a step by step wiring tutorial. Yes. Those WAGO connectors are the best.

Thanks Tito, hadn't seen those dimmer combo switches before. Great find! FYI: Beware of press-fit parts that need metric hole-saws, drills, and bits... Amazon seems to be kinda slack on their selection.

@RVwithTito

2 жыл бұрын

Yeah. I'm glad I found those too. I have several of them now.

Nice addition, love those puck lights.. We have center lights and I've been looking for dimmable LED replacements for 18" fluorescent lights.. sadly, no real access to the ceiling wiring other than by the light itself.

@RVwithTito

4 жыл бұрын

Yeah. The ceiling is a little more complicated unless there's a heating duct nearby.

@stattytravels4638

4 жыл бұрын

@@RVwithTito there is about a foot away, I tapped into it on our last RV, that was a job and a half.. first I need to find the right light fixtures..

WOW Brian, we must be brothers from a different mother. I did the exact same thing this past spring while in lockdown.

@RVwithTito

4 жыл бұрын

Who knew? :) Hope it's working well for you.

@SpykersB

4 жыл бұрын

RV with Tito DIY , ....okay, lets get Dave cloned too. Cheers 🍻

Did you also switch out your ceiling florescent lights to led?

Doesn’t the reflectex work BECAUSE it reflects though? I know it’s a good insulator for cold weather but doesn’t the shiny need to show to reflect the heat back out?

Nice job Brian looks great. When and what direction are you off to next during this covid nightmare?

@RVwithTito

4 жыл бұрын

Sticking around Washington through the summer and working on RV upgrades. Everything is TBD at this point.

I see you have two dimmers. Are they wired to the same lights? Like can you turn one on and then switch it off or dim it from the opposing switch?

Great project .... so tell me more about the clear plastic or Plexiglas containers you use in the cabinets.... I think I need to get those.

@RVwithTito

4 жыл бұрын

Those are kitchen storage bins from mDesign. My wife picked those up at Home Goods and TJ max.

Well done. I would like to run a set of wires with a switch to the extrerior on both side to be able to add some security lights.. Any thoughts how to run the wires on the inside of the roof.

@RVwithTito

4 жыл бұрын

Best approach is to find where other wires are run and reuse those routes.

Beautiful Brian! Another project that is on the list this autumn as I want to replace almost all of the fixtures.

@RVwithTito

4 жыл бұрын

Thanks. Good luck with the project!

3.5 years later - how is that dimmer switch holding up? Early in your video, when you were moving the slider up and down, it looked like there was some wobble to it, which makes me wonder about the manufacturing quality.

Hey buddy I know this is kind of like an old video but hey can you tell me what kind of fuse box is in your RV it's electric in 12 volt do you have a model number on there that I might be able to get I need to get me one for mine cuz I'm doing a rehab on mine I really appreciate you Good job on the lights thank you sir and what kind of puck lights are those thank you

Time to invest in a Sonic Crafter for cutting those square holes. Plunge cutting, sanding, scraping they can’t be beat. If you don’t want to spend that kind of money, get a knock-off at Harbor Freight.

@RVwithTito

4 жыл бұрын

Just picked up an oscillating tool today. Next rectangular hole will be much cleaner. Thx.

Great job What's it mean when you dim the LED puck lights and they emit a buzzing sound ?

@RVwithTito

3 жыл бұрын

Some fixtures do that if they're not designed for dimming (I think). I haven't had any buzzing with these.

I've replaced all the light bulbs in my trailer with daylight led bulbs because of our old eyes. We're past the stage of needing mood lighting! Wow, those Wago connectors would've been really great when I recently replaced the incandescent tail lights on the trailer with led units! I think I'll just order those just to carry around in the trailer. Thanks!

@RVwithTito

4 жыл бұрын

Ya never know...they help put you in the mood to sleep 🤔

@2-old-Forthischet

4 жыл бұрын

@@RVwithTito just wait till you get to my age! As soon as my head hits the pillow, it's lights out!

Brian nice Light mod! But you need a 'Mulit purpose' tool for cutting square holes! A nice, neat clean hole fast and easy! Check it out! Nice mod again! BobnRobin

@RVwithTito

4 жыл бұрын

Don't I know it :) I"mm sure I'll have one soon.

Hello I am loving your vlogs! Just found you tonight. I want to make our main living area lights dimmable. There are 5 lights connected to the main control panel light switch. How could I go about making those lights dimmable? Thank you so much. I look forward to your reply.

@RVwithTito

3 жыл бұрын

You'd have to wire a dimmer between the control panel and each light you want dimmable.

Awesome video Tito. Just subscribed to your channel. Im a first time RVer with pretty decent DIY electrical experience in 120v AC and a little 12v Dc (stereo/fog light installs in rigs). I’m getting ready to install a dimmer for our bedroom ceiling lights- 2020 grand design imagine 3100RD TT. I’ve pulled the existing switch and it’s a standard 2-pole with those flat spade connectors. The power (line) side is a single 12v wire and on the load (to lights) side, its two wires crimped nicely into one spade connector. The problem is there’s no ground in that wall to connect the 3rd wire on the dimmer. This however is the same wall that the converter/breaker/fuse panel is located. I know you can’t see my system, but any recommendations on finding a suitable ground would be appreciated. I’ll of course use my multimeter when doing my job.

@RVwithTito

3 жыл бұрын

There will certainly be a grounded negative bussbar near the DC panel. There will also be one on the light fixture itself that you could splice into. The negative DC wires are typically white.

Can this dimmer/switch unit be wired to existing ceiling LED fixtures to dim lights? Is there a max # of fixtures (wattage) it can dim?

@RVwithTito

4 жыл бұрын

It has a 9V - 16V range with 10A max current rating. Multiply the volts and amps to get wattage.

Great Job, Tito! What model and year RV do you have?

@RVwithTito

4 жыл бұрын

It's a 2007 Thor Four Winds 31F

What are you using to get the aquarium picture on your TV?

@RVwithTito

4 жыл бұрын

That's the screen saver on our ROKU device. It's fun to watch :)

What is the part # or do you have a link for the dimmer switch? Thank you. Nicely done.

@RVwithTito

4 жыл бұрын

I forgot to add the switch. Here's the link: amzn.to/2D3V4HA

Love the installation. Where did you get the dimmer switch?

@RVwithTito

4 жыл бұрын

Oops. Forgot to add that to the description. It's also in my renovation parts list. Here's the link: amzn.to/2D3V4HA

@philedwards500

4 жыл бұрын

@@RVwithTito Thanks! Enjoy your channel!

@3DPrints4TC

4 жыл бұрын

I can’t believe how expensive those switches are!! I’d recommend using a PWM motor speed controller that uses a knob to turn on and dim as a cheaper alternative.

I subscribed to your channel now

@RVwithTito

3 жыл бұрын

Welcome!

Are those new lights still individually operated?

@RVwithTito

3 жыл бұрын

Yes.

Tito-pucks 👍🏻

@RVwithTito

4 жыл бұрын

:)

Tito, what is the MPG on your RV for long trips?

@RVwithTito

3 жыл бұрын

I stopped paying attention to that 10 years ago. There are many factors like mountains, towing, wind, etc. I'd guess, while towing, between 6-9. A little better when not towing.

Brian, I literally JUST received that dimmer control I purchased for another project on my bedroom reading lights. Maybe I am jumping the gun here because I haven't finished your video... did you have any issue with LED lights and a dimmer? I am looking for replacement bulbs for the project I am working on and they all say "Non-Dimmable". I also noticed on the back of mine it has a tab you can barely see for "3-way switching". Of course, no directions came with mine... might have to experiment!

@RVwithTito

4 жыл бұрын

I haven't had any trouble dimming them. I've used the dimmer on 3 separate fixtures. I just have to add them to my bedroom lights.

@edd6917

4 жыл бұрын

@@RVwithTito I will have to try it and see. The bulbs that go in the bed side lights are CEC1076, was just going to buy some standard ones so I didn't have to worry about it. Thanks again for another great video! Now that I finally have my RV at my home, instead of at Camping World collecting dust as they jerk me around on repairs they were never going to do(sorry, I'm not too mad)... I'm doing all kinds of upgrades! Yeah, you inspired me on many of them! Maybe I should be recording some of this. :)

BTW you need to get yourself an DEWALT DCS354B ATOMIC 20V Max Brushless Cordless, it makes cutting those hard to get to locations like where you but the switch and dimmer a breeze..

@RVwithTito

4 жыл бұрын

I know I do :) I was looking at them at Home Depot the other day. I'll get one soon.

@cgaif

3 жыл бұрын

Dewalt dcs3548

What gauge wire did you use to add lights?

@RVwithTito

3 жыл бұрын

#14 AWG

@twdenman1

3 жыл бұрын

RV with Tito DIY Thank you. Will that dimmer work to dim 2, or 3 of those small pucks?

@RVwithTito

3 жыл бұрын

@@twdenman1 Yes. I have it connected to two pucks above the TV. Adding more should not be a problem.

Safety glasses when drilling!

i thought those connectors where so impressive i actually paused and ordered a set from amazon....thx

@RVwithTito

4 жыл бұрын

That's funny. I'm sure you'll like them. It's almost time for me to buy more because I use them so much. I've been using the 100 pack for a while now.

Hey Brian .. been following you for years .. where’s the merch?

@RVwithTito

4 жыл бұрын

No merch for sale but I have some tshirt and hoodie designs were experimenting with. What are you looking for?

@mike_adams

4 жыл бұрын

Tee shirt / hat

Nice job. I would have added a usb plug in middle of the 2 lights for our power hungry devices But I know you dont like hanging cords. Ka7qqv Don Weber

@RVwithTito

4 жыл бұрын

I actually did add a dual charger in the recliner storage. Plus there's one next to the recliner. So 4 should do 😃.

Am I crazy or are the switches swapped in the video? The rocker switch is where the “dimmer” label is and the slider is where it says “on/off”. Not that it matters based on where you ended up putting it lol. Manufacturing mistake?

@RVwithTito

4 жыл бұрын

Might be. I think the faceplate can be flipped and go on either way.

hi brian great video as always. the only improvement in your presentations is more of your beautiful wife😊 hoping my 74 gmc mh builder in IN will follow my lead by sending him pictures and amazon info to use the what u r using . i see u pull a crv- what towing system do you use? blue ox? be well and safe

@RVwithTito

3 жыл бұрын

I'm towing with a Roadmaster All Terrain

That switch seemed to be labelled wrong- the on off is the rocker, the dimmer is the slider. Not the reverse

@RVwithTito

4 жыл бұрын

I probably had the faceplate flipped upside down.

Titoville

Why didn't you add dimmer to existing lights

@RVwithTito

3 жыл бұрын

I already have a dimmer on that one, but it's hidden. We also wanted individual controls for each side.

They must think that because we can have an RV or Motor Home we are rich. I'm on disability and might be able to put one such light and dimmer switch every couple months. I guess I'll just have to get creative with lights I can get at Harbor Freight and such.

@RVwithTito

4 жыл бұрын

Sorry to hear that. Doesn't matter where you get the stuff. Just sharing ideas. If you need help don't hesitate to email me.

Sorry, lost me. This didn’t show the needed details. Primarily, didn’t connect the dots between each lights to the dimmer - reds whites and blacks, or how you described was going to be each seat’s ability to control individual dimmer levels, or how they tie in to the main power. A simple diagram we could freeze on and refer to would be invaluable, too. So in the end, no detail on connections to make this actionable.

You know that some future owner of this RV will be cussing you someday because he won't know how to turn those lights on.

@RVwithTito

4 жыл бұрын

That's never a concern for me.

A couple of your links no longer work. Great video otherwise.