Update BIOS on ALL Supported ASUS Motherboards: Easy BIOS Flashback Method
Ғылым және технология
When building a PC you most likely will need to update your BIOS especially if it is a newer motherboard. This should work on any ASUS motherboard that supports BIOS Flashback including AM5. There should be a button on the back panel if yours does. You can update the BIOS without the CPU installed with this method. You do not power up the PC at any point when doing this.
This can be done with or without a CPU installed.
If you found this video helpful please consider leaving a Super Thanks or a tip with BAT if you use the Brave browser. It helps us to invest back into the channel more. But even if you don't we will still try to answer as many comments as possible. Thanks for watching.
The most common solution to problems updating is to try a different USB drive. Sometimes even a reformat of the USB drive can make a difference. Also, verify the file was renamed.
In this video, we show how to update the BIOS on an ASUS motherboard using the BIOS Flashback method. This should work for most ASUS motherboards including AM5, Z790, Z690, B660, H610, Z170, X299, X570, B450, X670 etc. Pretty much any Intel or AMD motherboard that supports BIOS Flashback. Just be sure that you download the correct version of the BIOS for your specific board.
Find your motherboard BIOS here:
www.asus.com/us/support/
SamData 8GB USB 2.0: amzn.to/3n1Dbjy
Motherboard used in video ROG Strix Z590-I Gaming WiFi: amzn.to/3JnOx9g
As an Amazon Associate, I earn from qualifying purchases.
00:00 Start
01:09 Setup USB Drive
04:13 Setup Motherboard/PSU
04:41 Flash BIOS
Some supported motherboards:
ASUS ROG STRIX X670E-E GAMING WIFI, ASUS ROG MAXIMUS Z690 HERO, ASUS ROG CROSSHAIR X670E HERO, ASUS ROG STRIX Z790-E GAMING WIFI, ASUS ROG Crosshair VIII Dark Hero, ASUS ROG STRIX B660-A GAMING WIFI D4, Asus ROG Crosshair VIII Formula, Asus ROG Crosshair VIII Hero, Asus TUF Gaming X570-PRO WiFi, Asus ROG Strix X570-E, Asus ROG X570-F, Asus ROG Crosshair VIII Impact, Asus ROG Strix B550-I, Asus ROG Strix B550-A, Asus ROG Strix B550-E, Asus ROG Strix B550-F, Asus TUF Gaming B550-Plus, Asus TUF Gaming B450M-Plus II, Asus Prime B450M-A II, Asus ROG Strix B450-F Gaming II, ASUS Crosshair VII Hero, Asus ROG Maximus XII Extreme,
Пікірлер: 452
If you found this video helpful please consider leaving a Super Thanks or a tip with BAT if you use the Brave browser. It helps us to invest back into the channel more. But even if you don't we will still try to answer as many comments as possible. Thanks for watching.
@billybadass3056
11 ай бұрын
it wasn't helpful at all I wish the title of this vid wasn't misleading so I didn't have to waste my time watching it
@KLEEBZTECH
11 ай бұрын
@@billybadass3056 How is it misleading? Have not had one person say anything such as that.
@dadudejosh
8 ай бұрын
@@KLEEBZTECHwhat do you mean by, 4:36 “if your pc is already assembled, don’t power it up”?
@KLEEBZTECH
8 ай бұрын
don't boot it up@@dadudejosh
@jgvtc559
6 ай бұрын
Not a proper bios@@KLEEBZTECH I've done this like 7 times It's mbr it's over the required GB capacity It's formatted fat32 It's the latest bios It's my mobos bios It makes 0 sense man I dont understand what tf I'm doing wrong Every time I need to do something like this I always hit a brickwall It's so fucking infuriating 6 times I've prepared reformat tha drive and tried again It doesn't work
Your video was critical in helping me. Not even the video that asus posted on their channel was able to fix the issue! Thank you so much!
@KLEEBZTECH
Жыл бұрын
You're welcome!
@AwesomeLand123
Жыл бұрын
I'm trying his method instead of the asus method too. Wish me luck! The only difference is that I extracted the files within the USB. What do you think was different in your case?
Awesome clear video for Noob like me! Followed to a "T". Even went to Micro Center and got the Drive you recommended TU!
This is very informational because a lot of videos o ly talk about updating the dang BIOs via inside the ASUS BIOs itself and never works for me that way! Thank you. 👏 👏
Your background is the same as mine on my Laptop I was watching this on. Freaked me out for a second. Have to love some of the Webbs images! (amateur astrophotographer here)
@KLEEBZTECH
Жыл бұрын
😂 They are some great images.
This terrified me! But THANK YOU for the step-by-step...really helped!
@KLEEBZTECH
Жыл бұрын
You are welcome.
You sir earned yourself a sub! Keep up the great work!
@KLEEBZTECH
Жыл бұрын
Awesome, thank you!
Mate brilliant, I watched the official asus video then yours because I was still unsure…you nailed it🍻
Loved the video! The music reminds me of this game called "High on Life" I was just listening to you vibin
@KLEEBZTECH
Жыл бұрын
Glad you enjoyed!
Thank you so much i found your video extremely helpful to update the bios on my new Asus Rog Formula motherboard.
@KLEEBZTECH
Жыл бұрын
You're welcome!
Superb video. Impossible to screw it up. Well done 👍
Good Video. Also funny how you used a flashlight to See the indicator LEDs better ;)
@KLEEBZTECH
Жыл бұрын
Thanks. Actually just me moving in front of the lighting. lol.
Worked like a charm.
You sir are a gentleman and a scholar.
@KLEEBZTECH
Жыл бұрын
Well thank you!
Extremely helpful video many thanks
Actually better than asus's guides, thanks!
Very informative!!!!
Great Vid, thank you!
Super great man! Thanks so much for this vid
@KLEEBZTECH
6 ай бұрын
Glad it helped!
Your great for this bro thank you
Thank you for the guidance
Never thought I’d have bios issues for some reason…this is the second time in a year this video has fixed my problems 💀
@Cars_N_Tech
10 ай бұрын
8 months^
@KLEEBZTECH
10 ай бұрын
@@Cars_N_Tech glad we could help again. Hopefully the last time you need it.
Thanks for this video
thank you, how the hell asus dont have it explain it that way on their website, FAQ etc is beyond me. Dunno why I tought to have a power on while pressing flash BIOS before watching your video
Thanks you for this video, I did it with 64GB flash driver, so no problem to do this with exFat mine is Z790-E.
@tesssaint
2 ай бұрын
Hey i am having problems with the same mobo and my 14700k cuz the bios doesnt update it stops after 3min flashin and get error code 00 what did you do exsctly?
Brilliant … thank you muchly 🤗
@KLEEBZTECH
6 ай бұрын
You’re welcome 😊
Thank you!
@KLEEBZTECH
Жыл бұрын
You are welcome!
What a great feature.
@KLEEBZTECH
Жыл бұрын
Wish they offered it on all boards. I find ASUS seems to not offer on as many of the midrange boards that other companies do. Either that or I just was unlucky to have many with the feature and that included some decent motherboards.
Excellent tutorial just updated my Tuf Gaming X-670E PLUS WIFI to version 1813 no hassle no fuss on we go to gen 5
@KLEEBZTECH
6 ай бұрын
Thank you! Enjoy the upgrade!
@soz4555
5 ай бұрын
Same mobo but I can’t get to update the bio any chance you could help me I js struggle w the part of renaming etc and extracting part
thanks a lot
Lets hope this is the reason my 13th gen cpu didn’t work…will try this when i get home , thank you for the amazing video
@KLEEBZTECH
10 ай бұрын
Good chance. You can always look on the support page to find that info out usually.
Thanks ☺️
@KLEEBZTECH
5 ай бұрын
You're welcome!
This helped a lot, thanks
@KLEEBZTECH
Жыл бұрын
Glad to hear!
I'm using an Asus Z170-A, and there is no bios slot for USB or flash button, I clicked on this video for that exact problem since you put that motherboard in the title lol
@KLEEBZTECH
11 ай бұрын
Some Z170 boards do support it. It all depends on the model.
Since a series 7000 motherboard should support the Ryzen CPU without a BIOS update right off the bat, which method would be preferred for the first BIOS update, performing the update via the BIOS utility or the flashback method? Great video, though. Very helpful.
@KLEEBZTECH
Жыл бұрын
Well that depends on who you ask. Some will say the flashback method should only be when you can't do it the other way. They feel at seeing more feedback in the Bios utility is better. But my feeling is they are really the same. And from everything that I've read from the manufacturers they mention using the flashback as being the easier way. Really it's a matter of choice. I usually would do it on a new-build with the flashback and just get it out of the way. Of course some say you shouldn't update the BIOS unless you have issues but I always do it on a new-build.
Thanks for sharing, very informative. However, if you have a brand new uninstalled motherboard how do you know the BIOS needs updating? Thanks.
@KLEEBZTECH
Жыл бұрын
There is not always a way to know for sure. But if a new motherboard that has not been on the market for a couple years then likely it has an early version installed. If they improved support for a CPU you are installing it is likely that you will need to update. I personally update to the latest on a new build and then only update in the future if needed.
Hi mate after doing the bios update do you restart the computer with just the 24pin connected and check the bios?
Hey sir, thanks for this! Small question. Im flashing Asus TUF x670e plus without cpu and ram. After flashing is done, do i need to take power off, add cpu, gpu and ram? Connect monitor on gpu and fire up pc? Im missing the step when i need to add component. Sorry for newbie question.
@KLEEBZTECH
Жыл бұрын
Yes after updating the BIOS turn off the power switch and unplug and assemble the computer
Just to make sure I got this straight......I'm going to do my first build within a week. I get the flashing of the BIOS (without anything on the MB)..Great job explaining that!!!! But I've also been reading that you should update the ME driver and FW first before doing the BIOS update. So to me that means installing Windows 11 first with CPU, Memory, Storage, etc., correct? I really want to update the BIOS first because I want to make sure that the MB is ready for my 14th Gen CPU, Mem, Storage, etc). Can I update the BIOS first then build and install Windows 11 and update the ME drivers and FW after that? In what order do I follow the steps?
@KLEEBZTECH
7 ай бұрын
That would only be if you already have Windows installed. Otherwise you can do it after.
If I update just on the motherboard with no additions (GPU, RAM, etc) is it necessary to have my monitor plugged in as well? Great video!
@KLEEBZTECH
Жыл бұрын
No it is not. You are not booting the computer at any point.
@Quionic7
Жыл бұрын
@@KLEEBZTECH Ohh, okay. So it just needs the power then. Thanks!
i dont have bios marked port in back.
Hello, I am about to do bios update and some tweaking on my ASUS board and have some quetions : 1. If my system wont boot up due to bad tweaking (RAM settings or other), and i am no longer able to access BIOS, can I possibly just use this method to Flashback bios from USB (same version) ??? Will that work ? I would dodge the CMOS battery /header reset. 2. Lets say I want to go back to previous version of BIOS, if the new one is not stable. Is this still possible with this Flashback USB method ?
@KLEEBZTECH
Жыл бұрын
I haven't tested on Asus boards if you can reflash the same version. I know with others when I have tried that it doesn't update because it detects the same version. And personally going the other route with the CMOS battery is probably the safer route. As for flashing previous versions you would have to check the BIOS updates and see if any notes about that. I know I have seen some that say you can't flash a previous version after a specific update.
Quick question, what about Intel ME download before bios? I can't really do it before bios update in my case because I'm building brand new pc. I see one guy already asked but not sure what to do exactly? Windows will automatically update it?
@KLEEBZTECH
Жыл бұрын
I believe they say to do it before the bios update because if you already have Windows installed you should. Otherwise you should be good.
@shadowkage6403
Жыл бұрын
@@KLEEBZTECH Hey man hope you’ll reply Quick I have the Asus ROG strix Z690-A Gaming wifi D4 as I put the USB device on my pc on the bios marked on it. I tried to follow my manual motherboard as it says “the utility automatically checks the devices for the BIOS file, When found, the utility reads the BIOS file and enters ASUS EZ Flash 3 automatically” And I don’t see any changes in my bios screen And then I tried to follow your method.. as I put the usb with the BIOS file I press the little button with a stick and I waited for almost 2 minutes and it didn’t flash and my BIOS screen doesn’t have any changes again. What is the solution of this man? please help btw you have new sub❤
@l8nytr
10 ай бұрын
@shadowkage6403 same situation... wild it is not more streamline
Anyone tried this with a TUF Gamung ASUS Mainboard? I tried to update it with ezflash out of the bios...basically as soon as it startet processing my system shut down... had to remove the battery to get it running again and now i am afraid to even try ^.^
When you say “on a fully built pc don’t power on during the process” do you mean don’t flip the switch on the pcu or clicking the button on the case
@KLEEBZTECH
Жыл бұрын
You only power on the power supply. Do not press power button on the computer to start it up. You need the power supply turned on in order for the motherboard to have power to update.
Can you do this if you already have an older bios version installed? I just want to update to a newer bios version.
@KLEEBZTECH
3 ай бұрын
Yes this is to update whatever you currently have to the newer version. It will replace the BIOS currently installed.
Did this work for anybody who tried using ai suite 3 and couldn't use the ex installer?
for me, after the bios flashback (3.5 min), the boot up did not just lead to updated bios. I got message saying hold up we need to flash bios before we can continue. It then rebooted a few times before it went into bios with latest version. Difference might have been my bios also included latest ME. Mine was a new build ... with only the bios flashback as the source for the code. I just find it strange that no one else has mentioned this behaviour.
@KLEEBZTECH
5 ай бұрын
On rare occasions there can be things that are updated on first boot like that. It is not common.
Thank you for this, perfectly explained! I just put together my new build, it has a i5-1:600k , asus z690-I gaming, ddr 5 and 1tb m. I, is not posting at all, i tried everything except updating the bios, could i use this method to make my 13th gen cpu to run? I don’t have a 12th gen laying around with me to test if that works , thanks again!
@joh_nas
Жыл бұрын
ye it should work + you wont do anything bad by trying it
@joh_nas
Жыл бұрын
If the motherboard have b660 chipset you have to flash bios for 13 gen to work but as i said this should work
@KLEEBZTECH
Жыл бұрын
If the motherboard supports BIOS flashback then I would give it a try. Especially with a new build since it is probably outdated a bit.
@tongoso
Жыл бұрын
@@KLEEBZTECH thanks much!
@Justmakesomenoiz
Жыл бұрын
@@tongoso did it work and could u update to the latest version directly?
If you fuckup the flashback during, since this is internal can you just restart the process and try again unlike a regular BIOS flash? Or will you brick your motherboard?
@KLEEBZTECH
11 ай бұрын
If something goes wrong in theory you should be able to do the flashback method and do it again. I have only needed to do it once so really can't say exactly how reliable that is.
This feature is only available on specific boards. Not every board has it.
If I’m building a new pc should I build it after doing the bios update or connect to a monitor and power it up?
@garytman007
7 ай бұрын
I would build it after, this way if you have a 13th or 14th gen cpu it will be accepted.
I'm trying to update my ASUS Strix Z690-E board to allow my i7-13700KF to be compatible. I'm hoping this video helps, thank you! Will subscribe and like.
@KLEEBZTECH
Жыл бұрын
Hope all goes well. If you have any issues just be aware that these are very picky when it comes to the USB drive. Sometimes you may need to try a different one. The older and smaller capacity usually the better results in my experience.
@javierdelgado4695
Жыл бұрын
@@KLEEBZTECH Thank you for this tip. I hope your channel continues to grow!
@x_Heffe_X
Жыл бұрын
@@javierdelgado4695 Any luck? I just ordered this board and a 13700k, waiting for it to arrive and want to hit the ground running.
@javierdelgado4695
Жыл бұрын
@@x_Heffe_X i haven’t tried yet, but I will let you know as soon as I do!
@x_Heffe_X
Жыл бұрын
@@javierdelgado4695 Awww man. Please do! My stuff should be here Friday.
what do you mean by "if the pc is already assembled" "do not power up"? You do have to turn the power on to be able to run the bios Flashback or? Can someone explain the nuance ?
@KLEEBZTECH
Жыл бұрын
Yes you need to turn on the power switch on the power supply but do not boot up the computer.
So I recently changed my settings from Normal to Power Saving in the bios (ROG B660-A) because the 13700k cpu was running way too hot 95-100 Celsius in cinebench r23. It did change the temperature(70-75 C), but it lowered too much the performance and the rgb lights are not turning on anymore. Any changes I make to the bios, like restoring back to default, or change Normal to Power Saving and vice versa doesn’t help to bring it back to Normal. I tried flash ez tool for the newest bios version(no results), now tried this method, flash backed to a previous version and yet no results. Still works like in power saving mode. I would leave it like that, because the performance I get is enough for me, but without rgb is kinda weird…
@KLEEBZTECH
Жыл бұрын
Strange...
@DK-qf6pr
Жыл бұрын
My asus rog won't work with 13500. I did BIOS flashback latest update which went as expected but then I'm getting fans and lights working but nothing in monitor (connected to motherboard since I don't use graphics card)
is this the same forn ASUS ROG Strix B650E-F Gaming WiFi Motherboard
hi i have asus rog strix 650E-F now i wait for new ryzen 7900x3D what is better before update bios before inserting a new processor or when instaled new procesor on motherboard and after update bios ?
@KLEEBZTECH
Жыл бұрын
Using this method it should make no difference.
hello. Can you explane me how to make bios update like this steps, on ASUS TUF GAMING Z690-PLUS WIFI , on this MB do not have extra USB port and button for bios.
@KLEEBZTECH
Жыл бұрын
Without BIOS flashback feature you will need to update with this method which does require that the computer can boot into the BIOS: kzread.info/dash/bejne/hpyFrLRrea6biKg.html
But if my board doesn´t have flashback, I am screwed. Because my new Z790 plus wifi came with old FW and my procesor is 14. generation KF. So Asus made such great TUF board ... but forgot to include this crucial function.
@KLEEBZTECH
5 ай бұрын
Yeah I don't understand why they don't put this feature on more of those boards.
Does anyone know what to rename the bios file for a Asus Prime B760 D5? I'm working on a mac until i build my PC and cant run the .exe renamer file. Thanks
I tried this and got a 'Memory Code 00' message, It then refused to boot at all, even after clearing the CMOS, reflashing both BIOS chips etc!
btw you can power on the computer, and navigate the BIOS the new Asus motherboard will give picture.
Flashing BIOS gives me anxiety. But I will follow this video once I buy my new PC. Thanks!
@KLEEBZTECH
Ай бұрын
Understand. It used to for me as well. But honestly it is rare I run into issues these days and when I do it is usually a defective motherboard that gets replaced. Nothing you can do about that.
please answer me.. i just did and flashing ended in 3-4 min on asus b660-A wifi mobo.. is this normal or its too fast to end flashing? should i intall cpu and open pc or need try again? bcs asus on support site says “depending on bios size will completed in 8 minutes”
@KLEEBZTECH
Жыл бұрын
I just went back and checked the original video in real time and mine took about 3 or 4 minutes for the last two updates I did. I actually flashed it to an older version since it was already updated so I could make the video so I did it twice. Both times were around 4 minutes.
Hi, im just about to buy a z790-a asus rog motherboard, but dont have a CPU yet. Can I still do this procedure with aboslutely nothing added to the motherboard appart from the 24-pin power cable?
@KLEEBZTECH
7 ай бұрын
If it supports bios flashback.
@spilaney
7 ай бұрын
thanks, yep it does@@KLEEBZTECH
What are the cases when a USB 3.0 will not work for this? I thought as long as you put the USB 3.0 in a 2.0 slot its fine.
@KLEEBZTECH
11 ай бұрын
It is pretty random when it comes to this stuff. It's not the same as when you're running the operating system. I'm not sure entirely why. Sometimes it's just a matter of formatting again I have seen solve any issues.
Thanks a Lotttttt my brother, . i have liked your video, and subscribed, pls do give me your name in next video. thk u thank u thank u. i learnt how to do it.
So im doing this litle project and have some parts ordered. What should i do when they arive, should i first assemble the pc and see if the cpu needs the bios update or straight on just instal the newest bios update? The cpu and the motherboard is nothing special, its the (Ryzen 5 5500 and Asus prime b450m-k II).
@KLEEBZTECH
Жыл бұрын
Personally I usually update first to avoid issues. But really up to you.
@kalninss1958
Жыл бұрын
@@KLEEBZTECH Okay, thank you
I have asus tuf b660 plus wifi d4 ....how can I update the bios without using the 12th gen processor? it looks like my mobo doesn't have any bios usb hub and flashback button...
@KLEEBZTECH
Жыл бұрын
If it doesn't support BIOS flashback then you would need a supported CPU in order to update your bios.
asus z390 e gaming motherboard doesnt have the bios flashback port and button, Motherboard switches on only if the cpu power isnt connected(with cpu power connected it just cant start the psu or anything). How can I flash BIOS without cpu and bios flashback button?
@KLEEBZTECH
Жыл бұрын
Nothing that you could probably do. I would contact their support. If you can't get into the BIOS nothing you can do.
i have a asus b660-plus-d4 and in the manual it says that i can update the bios via usb but theres no button on the back nor indicator to know which usb to use
@KLEEBZTECH
Жыл бұрын
They are probably referring to using a USB to update within the BIOS. You do need to be able to boot to the BIOS to do that. I actually am planning on doing a video of that soon but that obviously won't help now.
so if it only went like you said flashed seconds and turned to solid green then bios update never worked right?
@KLEEBZTECH
4 ай бұрын
Most likely not.
Is this method going to work on Rog strix z790 hero??? Please let me know. I am so confused.
@KLEEBZTECH
7 ай бұрын
If it has the BIOS flashback button it supports the method.
My motherboard is tuf gaming b550M-E and the motherboard is not flashing it flash for 3 times then it has the ligh of the bios update always on and not turnig off
@KLEEBZTECH
Жыл бұрын
Have you tried any other USB drives? That is often the issue.
o got a question, hopefully you can help me. at 2:45 right on bottom says please download intel ME update tool? what does that mean and how? thank you
@KLEEBZTECH
11 ай бұрын
If you need to do that you should find it on the support page for the motherboard. You install it in Windows.
@KLEEBZTECH
11 ай бұрын
www.asus.com/support/FAQ/1047868/
@yoobollo420
11 ай бұрын
@@KLEEBZTECH wait I'm confused? its a fresh new motherboard, how do i do that when it still has no windows. im new sorry. or just follow instructions above and not update ME till windows is installed. ty
@KLEEBZTECH
11 ай бұрын
@@yoobollo420 yeah if it's a new board don't worry about it and just install after as you would with your drivers and everything
The only format option my usb gets is ExFat... is that okay? or does it have to be Fat32?
@KLEEBZTECH
7 ай бұрын
That most likely means you are using a drive larger than 32GB. There are ways of formatting a drive larger than 32GB as Fat32 but I do not cover those. It does need to be Fat32.
hi i have mother board asus b350 and i have problem >>>>> the Q-Flash Plus button is not found >>> what i do ??
@KLEEBZTECH
Жыл бұрын
If there's no Q flash plus button then that probably means your board doesn't support it. Does it have a USB port that indicates bios update?
Does ASUS TUF GAMING B760-PLUS WIFI DDR4 support this feature? Also do I need to flash the bios to install 14th gen CPU on this motherboard or should the stock BIOS be enough to run this CPU?
@KLEEBZTECH
6 ай бұрын
From what I can tell it does not support BIOS flashback and I do not see a button so I would guess not. Looking at the support page it seems you would need an update from a few months ago to run 14th gen and I doubt a new board would have the latest BIOS versions.
@ReximPL
6 ай бұрын
@@KLEEBZTECH uh, okay. But I see it has something called Asus Crash free BIOS. Would it work or not?
@KLEEBZTECH
6 ай бұрын
I have little experience with Asus Crash free BIOS but my understanding is it only works when it detects a corrupt BIOS and you still need compatible components.
I could not get this to work........ NO re-namer file, so I change in Windows. Copy to flash drive.......Never got it to install.
I have d/l the bios for a Z97 PRO (Wi-Fi ac)/USB 3.1 but it comes in a zip with no BIOSrenamer.exe. What now?
@KLEEBZTECH
5 ай бұрын
Good question... I have not run into that before. Have you checked the manual for that board?
@KeVIn-pm7pu
4 ай бұрын
did you find a solution? i have teh same issue. aswell with a Z87-Pro
Hello!(: I'm not sure if mine is updating or not, I only have 64GB a flash drives, is this too big for the system? When I try to run flash it blinks for 2 seconds, then it stops blinking and it's a constant green light. Does that mean it doesn't recognize it?
@KLEEBZTECH
Жыл бұрын
The USB is your problem. It must be formatted to FAT32 which by default you can't do in Windows for anything over 32GB. There are ways of doing it and I think it would probably work if you can format it to FAT32. But that is another topic.
@odalvaas1443
Жыл бұрын
@@KLEEBZTECH nice thanks! I'll try to find another ine
@KLEEBZTECH
Жыл бұрын
If you know how to create just a 32GB partition on the USB drive you can format it FAT32 which might work. I have not tried.
@odalvaas1443
Жыл бұрын
@@KLEEBZTECH i tried with a 1.8GB one now, and made sure the file was fat32, but yet again the light stops flashing and is only glowing a constant green now. But the renamer didnt automatically put .cap on the file. Could that cause my issues? Thanks for the help so far
@KLEEBZTECH
Жыл бұрын
It does have to have that file extension. Do you have Windows set up to show file extensions for known file types?
If I am using a brand new USB drive, already formatted for Fat 32, do I have to reformat it?
@KLEEBZTECH
9 ай бұрын
Probably not. But if you run into any issues I would give it a try
is it fine if i have to copy it to my usb drive? it just automatically saved it to my downloads so i copied it over to the usb drive
@KLEEBZTECH
4 ай бұрын
yup
@charoimile
4 ай бұрын
@@KLEEBZTECH thanks man
Just upgraded my sons PC turned it on and Nothing. No Picture Detected and None of the Peripherals turn on. The Fans are on and the AIO is on too, (Motherboard Asus B650 plus wifi, AMD Ryzen 5 7600x, Crucial DDR5 4800mhz RAM) Hopefully this will help.
@KLEEBZTECH
6 ай бұрын
Hard to say but I did a quick look at that board and should support all CPUs. But could be something like the RAM. I would check the support page and check if the exact RAM is verified to work. That is sometimes an issue.
@theres1dentevil
6 ай бұрын
@@KLEEBZTECH thanks for the reply. As you said in the Video the BIOS Flash didn't work first time so I formatted the USB Stick and redownloaded the BIOS Update and this time it worked and the Board RAM light. took both sticks out and just swapped them around and jobs a Good'un. Now just reinstalling Window etc.
Do I do this with the system Off or can I update it with being idle in desktop
@KLEEBZTECH
3 ай бұрын
Don't boot the computer.
Suppose there was a power cut(its common and random here) during the bios update and mobo got bricked. Will bios flashback be able to recover it? The mobo i want to buy is b450m pro 2 TUF gaming.
@KLEEBZTECH
Жыл бұрын
I have never run into that to test but I do know that board says it has ASUS Crash Free BIOS which I think would allow recovery but have never done it. I always connect to a UPS battery backup. Which really should always use with any computer in my opinion. I am not sure if the regular flashback would work or not.
@XEN-jl7zh
Жыл бұрын
@@KLEEBZTECH Thanks for taking the time to reply these kinds of videos really help :)
@marcmacias2022
Жыл бұрын
@@KLEEBZTECH Hey there, what kind of UPS battery backup do you recommend? Im building my first rig and I would like to prevent any random power cut. Thank you very much for the vid, it helped me a lot!
@KLEEBZTECH
Жыл бұрын
I like these. For basic protection you don't need to get the more expensive ones. But those will run longer. There are other cheaper ones on the market. But for total protection these are what I use.
@KLEEBZTECH
Жыл бұрын
www.amazon.com/CyberPower-CP1500PFCLCD-Sinewave-Outlets-Mini-Tower/dp/B00429N18S
Hi, I’m using the ASUS ROG STRIX B550-F GAMING M/B and the Ryzen 7 5800X3D. Can I have the CPU in the motherboard wise doing this update? or would that break anything.
@KLEEBZTECH
Жыл бұрын
Can be done either with or without. The system I updated in this video was already built.
@Hevo123
Жыл бұрын
@@KLEEBZTECH thank you !!!
My z790 does not have any bios drive in the back.
@m7md_q5
11 ай бұрын
Me too Mine is z790 tuf plus wifi d4 It is required to download specific drivers before update bios
What if your mb doesn't have a bios flash button? (Asus z170m plus)
@KLEEBZTECH
15 күн бұрын
Then you would have to do it the normal way in the BIOS. kzread.info/dash/bejne/hpyFrLRrea6biKg.html
I just bought new Asus TUF Gaming B450M-PRO-II for my ryzen 5600g..it need a bios update for this processor.. as u saw in video it just need to connect 16 pin power cable to mobo.. do we also need to connect cpu cable as well or not or just 16 pin motherboard cable ..pls clear it
@KLEEBZTECH
Жыл бұрын
You only need to connect the 24 pin power cable. ASUS does not need the CPU cable plugged in.
@jitendra_roher
Жыл бұрын
@@KLEEBZTECH ok thanks for confirming
Do u need to have the cpu cable plugged into the motherboard ?
@KLEEBZTECH
Жыл бұрын
Not with Asus motherboards.
if you want to manually flash bios without flash back you shouldnt use renamer right?
@KLEEBZTECH
8 ай бұрын
Correct.
so if the pc is already assembled then all is same we just don't put any power on it and the rest is same ???
@KLEEBZTECH
10 ай бұрын
Yup. You only switch on the power supply and never push the button to boot the computer.
@CyrusDaVirusP
9 ай бұрын
What happens if I turn on the computer before I update?
@KLEEBZTECH
9 ай бұрын
@@CyrusDaVirusP you will have to turn it off and start again. Don't do during update.
@CyrusDaVirusP
9 ай бұрын
@@KLEEBZTECH ok I did it correctly where the light flashes for like 4-5 minutes then stops, then I push the power button but does not boot up I get an error still on my asus rog 690 hero
Im building my first computer with a 13th gen cpu. The bios says i need to download the intel me tool before. Can i download that the same way as the bios?
@KLEEBZTECH
Жыл бұрын
If memory serves me correct that is done in windows. I just ran through the instructions quickly and that's what it seems like.
@KLEEBZTECH
Жыл бұрын
What I found www.asus.com/support/FAQ/1047868/
I have the Z690-A it doesnt have a bios USB or a Bios FLBK button... so what am i suppose to do?
@KLEEBZTECH
10 күн бұрын
If you can access the BIOS then you can update this way: kzread.info/dash/bejne/hpyFrLRrea6biKg.html but if new build and unsupported CPU there is no way and would need to use a supported CPU to do it.
@chaotic8312
10 күн бұрын
@@KLEEBZTECH I can't access the BIOs that's the whole problem.
Hey, I pushed the button, and it flashed briefly, but then the light went to solid green always on. And the usb drive was not flashing. Is it safe to remove in this state?
@chokit0733
10 ай бұрын
Sorry for the late , looks like its a usb problem , try to use any software to format and convert your usb to MBR , and try again
@hj-mr5gg
10 ай бұрын
@@chokit0733 thanks for the reply, i used rufus to fix the issue if I remember correctly
im stuck on the part where you double click the rename file and click any key to rename it, but when i click any key, the file is not renamed. Am i doing something wrong?
@christophershumba7042
11 ай бұрын
I kinda had the same problem but i noticed it did work , just refresh the folder and the name will be update
@romezone.
10 ай бұрын
@@christophershumba7042 thank you for that 😄
I am getting a 92 code on my board and screen . Can’t flash or boot. I have a z690 classified
@KLEEBZTECH
Жыл бұрын
Was that after flashing? Or is this on a new board you just got?
My light blinks for a second and light keeps turning on
Why i dont see the green light flashing? I dont know if the Bios is Flashing🤷
@KLEEBZTECH
7 ай бұрын
If you are in a room with bright lights it may be hard to see the light flashing. Turn off some lights just to see if it is. Does your USB have a light? That you can check as well to know if it is accessing the USB to do the update.