Good job love you From Dino Mares Fontana CA

@GarageKing

5 ай бұрын

Thank you Dino and hope you are doing well, Snap On should be tomorrow !!

Came out at the perfect timing. I just bought this and the Thinktool Pros. I do not know which one to keep.

@GarageKing

4 ай бұрын

Really up to you, I haven't reviewed the Thinktool Pros.

@shaunmaxwell2745

4 ай бұрын

@@GarageKing yeah for sure. Have you been able to active purge valves and vent valves with it? Or have you even tried?

@GarageKing

4 ай бұрын

@@shaunmaxwell2745 Haven't tested that yet, but if you are referring to EVAP purge valve I remember seeing that activation in the menu (for Honda) I didn't do it in the video as the camera would never be able to pick up the sound for that test as you can barely hear the valve when its tested.

Does that scanner work on Ram Trucks? i didn't notice it on the vehicles selection.

@GarageKing

Ай бұрын

Yup it should, at the 1:59min mark Dodge is there. Hope you are having a good weekend my friend.

Do you have to pay every year in order for this OBD reader to work ? If you dont pay does that still work ? Do you need to have internet to used it ? If you don't updates does that still work without updates ? Out from the box can you used it without wifi or internet ? Can this scan for Fuel Pressure ? And can this do compression test ?

@GarageKing

4 ай бұрын

Wow that's a lot fo questions, ok, I'll try to get them all. No you don't have to pay every year, it comes with 2 years. If you don't pay, it won't update but it will still work (eventually its going to get too behind and not be useful). You need Wifi for first set up and to active it, that is a must, after that you don't need wifi, but its a good idea to use wifi every so often as it will update for free during your two years. It can do static compression on some engines, but not all. For fuel pressure I'm not sure. I didn't look at the live data for fuel to see if it was reading pressure.

Do you know if this can do zero point calibration for Toyota's ?

@GarageKing

2 ай бұрын

Hey There, not sure about that one as I never tried it. I would assume it would as it does a lot. If you want to confirm you can click the link in the video description, and that will take you to the amazon link where I purchased the scanner and you can ask the question, they are pretty good at responding. They will want exact model and year.

how is it using a global launch model versus buying a launch usa model like the torque or turbo? have you ran into anything odd? seems to really be the same. I talked to launch usa and they say to only buy a launch usa model. but looks like yours works the same.

@GarageKing

4 ай бұрын

So far so good, and I have used a few of them.

Its show the live data on injectors,with live corections?

@GarageKing

Ай бұрын

Yes it should as long as the ECM will deliver that information. I found that it delivers different information for different manufacturers. This scanner does a lot.

Is this Scanner has an ECM / PCM reset?

@GarageKing

4 ай бұрын

Yes, but the ECP / PCM reset varies between manufacturers.

@LeonelPlancarte

3 ай бұрын

@@GarageKingso it can only rewrite ecu vins on certain models?

@GarageKing

3 ай бұрын

@@LeonelPlancarte It may be able to do it on all models, I'm not sure, but when I go through it some of the functions vary for different manufacturers so I can't unequivocally say it can do it for all of them. If you have a specific model you could always reach out to Launch to verify. Most likely it can, but I can't confirm.

can you adjust idle rpm with that?

@GarageKing

2 ай бұрын

You can write so I'm sure you can although I have not tried it for adjusting the idle RPM. You could always reach out to Kingbolen who is a distributer on Amazon, provide your vin and ask them. They should know. Here is the link to their channel www.youtube.com/@kingbolen_official

@Dresgarage96

2 ай бұрын

@@GarageKing thanks

@GarageKing

2 ай бұрын

@@Dresgarage96 Hope that helps, these scanners really do A LOT

@Dresgarage96

2 ай бұрын

@@GarageKing thanks, im looking the best for my budget around $650, not only for clearing DTC, but also can do slide adjustment like idle, ignition Timing ect

@GarageKing

2 ай бұрын

@@Dresgarage96 Good call, I can tell you this one does a lot. Sometimes Kingbolen has sales and you can check out directly buying from them bit.ly/49HTdT1

Not wireless 😢😢

@GarageKing

2 ай бұрын

This one is not

@GarageKing

2 ай бұрын

This one is, and is actually quite good kzread.info/dash/bejne/rISLw7KghLS8paw.html