Unlocking 2001 to 2005 GM Class II RDS Stereo Systems

Автокөліктер мен көлік құралдары

This is a demonstration of what the radio does, and it shows which chip where, needs to be removed in order for the radio to work with out taking it to the dealership and paying them $50 to $100 to unlock the radio for you. This saves you their excuses, and saves you money to get tunes back in your car.
Side Effects to Consider before doing this:
1. AM/FM/CD Only Decks will always have the Tape icon on.
2. All Units will display CAL ERR upon first power up (goes away in 3 seconds).
3. When powered on a bench out of car, the display will dim it self slightly (BCM tells them to dim or not. Defaults to Dim without BCM signal)
4. I believe this is a wiring issue in the harness, but I have heard they can lose their Presets each time power is removed.
5. The very very later units, 2005 to the end of this style radio, need a digital "On" Signal from the vehicles BCM, so if you wish to use it on a bench, the older ones don't need a digital signal to power on. It will see that signal in car and still power on.
*This system DOES NOT WORK* On radios above 2006. Later GM radios use an 11Bit, or 29Bit Data BUS (CAN, or GMLAN). All these radios need a digital ON Signal to work. There is an Adapter to send them the "On" signal for sale around ebay.
This strange system has also prevented car stereo "benchers" like me from operating the units out of the car. That system defeated, it opened a whole new range of car stereos for us.
Remember, if you own the car, you own anything in it. As such, you own the radio installed in the dash board, and there is no reason for the manufacturer to tell you, you can't change your radio, or install a better one, or anything with out paying them a fee. And really, ask your self "Who would steal a factory radio?". I stay factory in my own car because if curious eyes peek in and see a factory deck in the dash, they'll ignore it and move on to the next car!
Disclaimer: If you screw your radio up, that's not my fault. I hold no liability what-so-ever. This is a do at your own risk modification. If you do this and do it incorrectly, and turn your radio in to a paper weight, I am not liable in any way, shape, or form for your mistake. If you are uncomfortable doing this, then take the radio to a dealer and have them do it the correct way.
I had nothing to lose. These won't work in my Saturn, I bought these to add to my vast GM Stereo Collection, and to aid in figuring out the security in these, and how they were built.
I purchased my units from vehicles that are now gone, crushed, and sent to be melted down. They served their life, and now their parts, these radios included, are all that remain. I purchased them aid on a form site I am a member of in getting these radios to play nice. I have receipts to verify where I purchased my units.

Пікірлер: 375

  • @gabriela7x917
    @gabriela7x9172 жыл бұрын

    8 years later!! You have definitely helped someone sir!!! The first one, the one on the left, that's what I have. From an 03 Monte Carlo. Thank you thank you!!! The dealership was going to be $145 an hour to program/unlock. Buuut, I have to go back to the junkyard, the radio worked, but not the CD player ugh!!!

  • @BLarsen1997
    @BLarsen19974 жыл бұрын

    6 years and you’re still saving people’s butts. I appreciate it!

  • @Ace22257
    @Ace222577 жыл бұрын

    Last winter for no reason whatsoever my S-10's radio locked up on me. Did a google search and your videos came up. Went out and tried several numbers and FINELY got the code to unlock my radio. It's nice to have a radio again! Thank you!!!

  • @sher7w
    @sher7w3 жыл бұрын

    After taking our '05 Colorado to the dealership and being told they can't unlock the stero, that we could find instructions in the owners manual and of course charging us for their "advice", I found your video. Guess what?! IT WORKED!! Having to deal with the CAL ERR msg for a second is no bother. Thanks for your video!!

  • @jamesmarcum3348
    @jamesmarcum334810 жыл бұрын

    This is great advice and it worked great with the adverse effects. Most of them were no problem, but mine would always go back to track one on the cd everytime you shut the key to the off position. So some memory is forgotten by taking out the chip. There is another option that I found by accident scrolling youtube for other suggestions. My main proble was that the face plate lights were mostly burnt out and the cd player did not work. I purchased another radio from a junk yard which I unlocked by taking out the chip. Heres the best part! Once I discovered that the cd player worked in the new radio, I then switched out the cd player and the face plate. Guess what? Now I have a new working factory cd player with no issues! There are videos on how to take the face plate and cd player out, very simple.

  • @karengillette8332

    @karengillette8332

    5 жыл бұрын

    I just want to confirm that if I pull the chip out that the radio is now forever unlocked? I guess my question is it's not going to just run for 10 minutes at a time with the chip out it will work normally with a couple errors correct? Thanks

  • @ruralboy1
    @ruralboy110 жыл бұрын

    I just followed your technique for a used radio I put in my Silverado, worked great! No loss of preset memory. THANKS!! This is what the internet was invented for, sharing information. I LOVE IT!

  • @TheMikaili
    @TheMikaili Жыл бұрын

    Awesome!!!! Thank you... I bought a used radio, and realised it was going to be an issue. Looked at a dozen videos and websites.. ONLY yours was the correct way to do it... Well done.

  • @hsadder1
    @hsadder110 жыл бұрын

    Thanks God some one doesn't talk for 7 minutes and no info gave away. you where right at the spot. Thanks

  • @genepod5089
    @genepod50896 жыл бұрын

    I had a locked radio for a 2003 Buick Rendezvous. I couldn't even get the codes by pressing the buttons. I removed this chip (small screwdriver through the side) and the radio works perfectly. THANK YOU!

  • @jaydenwoodman
    @jaydenwoodman5 жыл бұрын

    Thank you sir! Glad someone was willing to put in some leg work for the rest of us and was willing to share the information!!

  • @alneda4670
    @alneda46709 жыл бұрын

    I JUST DID MINE AND IT WORKED ON MY 2005 CAVALIER STOCK CD PLAYER , EVERYTHING WORKS, THANKS A LOT MAN FOR SHARING THE INFO.

  • @andrewcortes1015
    @andrewcortes101510 жыл бұрын

    Thank you worked like a charm. Just in time to crank my Trans Siberian Orchestra Christmas cd.....Thanks again for taking the time.

  • @joelperez1119
    @joelperez11195 жыл бұрын

    JUST TRIED IT JAN 2019 , WORKED FOR MY 2004 MONTE THANKS BRO! WAS SIMPLE AS HELL!

  • @TheCadillacwes
    @TheCadillacwes9 жыл бұрын

    Hey Bro, I want to thank you for posting this information. I bought a radio for my mothers 2005 Equinox form a salvage yard that was locked. After looking at your video I was able to fix the issue by removing the chip. Thank you.

  • @KevinsRicherLife
    @KevinsRicherLife8 жыл бұрын

    Thank you so much!! My radio was the one on the right and as soon as I removed the chip.... I had radio!! Thank you so much for your time and your info!

  • @douglasw6474
    @douglasw647410 ай бұрын

    I just did this today! Radio unlocked and works great. The tape icon is on (no cassette on this unit) and the presets do NOT save...but the clock remembers the time. My aftermarket stereo quit and this old factory radio sounds better!! Thank you for this video

  • @Fixthisbuildthat
    @Fixthisbuildthat6 жыл бұрын

    Awesome! Just fixed my radio after replacing the BCM. only downside it now shows a little cassette icon in the bottom right and it's a CD only with no cassette deck. But I can definitely deal with that!

  • @metalguitarfailarmy5213
    @metalguitarfailarmy52133 жыл бұрын

    Worked for me! Bought a locked CD radio for my 2005 Chevy Colorado, Didn't know I ordered one locked, found this video, pulled the chip, BINGO!! Got. CAL ERROR message when first comes on, SO WHAT, goes away when you touch the volume. THANK YOU!!!!!

  • @trevorking242
    @trevorking2428 жыл бұрын

    Works like a charm. Mine was the type with easily accessible chip. Used pliers and twisted it off. No problems with "cassette light". Radio presets remain after shutting off. Has "calibration error" message when first starting radio.

  • @NewEraDad

    @NewEraDad

    8 жыл бұрын

    do you remember what it said on the chip

  • @patrickchevy3126
    @patrickchevy312610 жыл бұрын

    thank you so very much .. I saw the other guys that you mentioned. They would not help. but you sir, did.. and thank you for explicit details which is exactly what I needed. Great Job! Now I have another idea about this.

  • @peggyconnolly2024
    @peggyconnolly20245 жыл бұрын

    Pan you’re the man!! It worked on my 2005 GMC Jimmy. Thanks so much.

  • @njcamacho7
    @njcamacho710 жыл бұрын

    Thanks your video was of great help... removed the chip and bam the radio is unlocked and works.. thanks again

  • @bradysmith7586
    @bradysmith75869 жыл бұрын

    THANK YOU SO MUCH!! My Pontiac grand am (2003) stereo stopped playing CDs. And my aftermarket stereo isn't ready to go in yet(still need dash kit and harness) and I had a 2001 chev cavalier stereo laying around. But it was saying locked. So thank you so much!

  • @billmartin1144
    @billmartin11448 жыл бұрын

    Worked Great! Went from radio only to cd/cassette/radio/aux in a chevy express 2005. just as you mentioned... thanks so much!

  • @saramendez5451
    @saramendez545110 жыл бұрын

    Thanks it worked just fine after 2 stereos we are glad you helped us solve the problem!!!!!

  • @stephenjray1988
    @stephenjray19889 жыл бұрын

    Man Thank you so much i have went without a radio for a year in my 03 silverado because it was lock i just ordered aftermarket radio installation kit harness everything and just seen your video just pulled radio out done what you showed and it works great now i have to figure out what im going to do with the radio and stuff i just ordered lol awesome man thank you

  • @Bloudan54
    @Bloudan5410 жыл бұрын

    Hi I removed the chip and that unlocked it but lost memory so you can't store stations 2 days later I put the chip back and got the memory back and stayed unlocked Thanks for the video

  • @bridgycal
    @bridgycal10 жыл бұрын

    Awesome!!! Once I knew where to go I was able to fix mine in under 20min. 2005 Chevy Venture. Thank you

  • @jobdaniel
    @jobdaniel10 жыл бұрын

    Sicckkkkkk it works like a beauty! Thanks buddy! Youve made a happy family!!!

  • @duranimal61
    @duranimal6110 жыл бұрын

    Thanks for the tip........... bought a radio at Pick & Pull you saved me $$$$$$$

  • @markherring744
    @markherring7444 жыл бұрын

    Love you video! FYI The reason you’re losing power to the radio after removing the chip is because the radio has no way to communicate with the vehicles communications module that hooks to your on star as well. These radios don’t use a typical 12 V signal for power the module actually sends an 8 V signal. That’s why when you put an aftermarket radio in the wiring kit comes with a splice wire for 12 V source. I also had an issue with my 6 disc changer Bose system after a CD got stuck I unhook the fuse radio went in and went and limp mode so and wouldn’t play the CD player. Radio just flashes the CD emblem. Remove the radio took the top cover off and got the CD out but still just flashes. Nobody has had a fixture other than replacing the radio but I found a fix. Like I said the radio is controlled by that module by pulling the fuse you’re not shutting down the module you have to unhook the battery and Touch the cable ends together for about 30 seconds to a minute and that will put all modules in the vehicle to sleep. I work for a dealer I have to do this sometimes to certain vehicles that do weird things sometimes you just have to reset the modules and everything goes back to normal. Again thanks for the video.

  • @Kernel4Ben
    @Kernel4Ben4 жыл бұрын

    100% legit worked PERFECTLY. So simple thank you so much!

  • @larrybroussard966
    @larrybroussard96611 жыл бұрын

    THIS IS A VERY OUTSTANDING DEMO OF HOW TO UNLOCK THE RADIO THANKS ALOT AND KEEP UP THE GREAT WORK I'M VERY GRATFUL TO YOU

  • @scorpius7jeremiel500
    @scorpius7jeremiel5003 жыл бұрын

    Thank you, buddy, for helping us figure it out and for not being selfish as the other U Tuber.

  • @jmrodriguez8713
    @jmrodriguez871310 жыл бұрын

    This process worked. The board looked different on my radio but it still worked. I removed the chip with the numbers "9355093" on it. Cons: radio does not hold the programmed stations. When vehicle is turned back on, radio defaults to preset fm station. So far it's not an issue but have to select which CD to play after each vehicle start-up.

  • @alderfek
    @alderfek5 жыл бұрын

    Thank you, now I have tunes again !

  • @ScottysDetailing
    @ScottysDetailing4 жыл бұрын

    Thanks!! that’s just what I needed to unlock my radio I will let you know how it turns out tomorrow when I get a chance to work on it.

  • @jakebeetle3746
    @jakebeetle3746 Жыл бұрын

    Finally have radio now my commute won't be boring thank you

  • @MiamiGunner007
    @MiamiGunner00710 жыл бұрын

    Thanks man!! it worked for my Trailblazer 2005 radio!

  • @supervisionauto1supervisio794
    @supervisionauto1supervisio7949 жыл бұрын

    WORKED LIKE A CHARM THANKS!!!!!!!!!!!!!!!

  • @rlanevids
    @rlanevids10 жыл бұрын

    Thank you. It works 09 trailblazer into 03 envoy

  • @millaboi317
    @millaboi3175 жыл бұрын

    worked perfectly on the older model i had for a Buick lesabre 2002

  • @paulpeak1513
    @paulpeak15138 жыл бұрын

    works like a charm. You the man! Thank you

  • @jimpicirilli6489
    @jimpicirilli64895 жыл бұрын

    Thanks for the advice. I have this problem now and the darn thing just won't budge from the "LOCKED" display. The funny thing is, I had just purchased the vehicle (2002 GMC Sonoma) the previous week. The radio worked just fine for awhile, and I was able to set all the presets and play around with the buttons to see what function did what, and then I was able to set the correct time. Shortly after that it just decided to "LOCK" with no reason. The radio was not changed, the battery did not die, and I am quite sure it came with the vehicle. I can not get it to do anything now (and the cassette player does not work, but I knew that when I bought the truck). I'm about to pull out the whole damn radio and throw it to the cows to stomp on. I hate the thing! Lets face it, nobody is stealing "any" radios anymore, and if they are that hard up for a radio, then have fun with it. With this one, stealing it would be doing me a favor...

  • @justinfrahm4935
    @justinfrahm49354 жыл бұрын

    I just got the older model, but it was a little bit different. The chips had goo on them. I removed the eprom using a small flat head screw driver. It worked.

  • @adansanchez715
    @adansanchez7156 жыл бұрын

    Thanks a lot this video was really helpful I appreciate it

  • @torturedsoul7903
    @torturedsoul79036 жыл бұрын

    Thank you for sharing that information. I just bought an 04 Chevy Tahoe LTZ Z21 AND when we got it, the stereo was locked. Still is actually. It has a red screen and only says LOCKED on it. So hopefully your advice helps. Thank you.

  • @lukewebb96
    @lukewebb968 жыл бұрын

    Wow 2 minutes and I was rocking,,,,thanks,,,,,

  • @michaelclark5067
    @michaelclark50675 жыл бұрын

    This works AWESOME! What you need is a tiny craft X-ACTO knife, fresh blade. (The silver pencil kind.) Put a 2005 Impala ray-dee-oh into my 2005 Avalanche. For some reason, the number 5 preset works after power off/power up. Kicks as hard as a 49-year-old needs. Aftermarket is shite. (That's what I took out that was dead as a door nail.) If I want to get fancy, I might install the AUX jack, or just grab an FM combobulator and call it a day. And now, back to The Tragically Hip!

  • @MrMaddoggin
    @MrMaddoggin9 жыл бұрын

    Awesome thank you this worked perfect!!

  • @c4dan
    @c4dan6 жыл бұрын

    Great video Pan!

  • @thedoubletap9899
    @thedoubletap98994 жыл бұрын

    Good video man!!! It worked out great for me!!

  • @nicholas_scott
    @nicholas_scott8 жыл бұрын

    If you are not hearing AUDIO after doing this, then the issue is that that the stereo was programmed to use a different AMP. GM used BOSE and Non-BOSE AMPs that communicate with the radio before producing audio. The radio has to be matched to the AMP. I'm not sure how to bypass that

  • @ezakoske

    @ezakoske

    7 жыл бұрын

    Yeah, that's the issue I'm having and also what I suspected the problem was.

  • @vegashigdon1
    @vegashigdon17 жыл бұрын

    towards the end of your highly informative video you confused me. Not that hard to do BUT anyway. Lemme ask ya this,, on the 2 radios you had upside down showing the chip placement, after removing the chip on these 2 particular models, Do you also have to manipulate the wiring on those ??????

  • @jphauto
    @jphauto10 жыл бұрын

    Works great! It took 2 minutes! Thanks!

  • @sqlcivic
    @sqlcivic11 жыл бұрын

    Thank You very much...This video was a life saver.I'm glad I found it...!!!!!!!

  • @nickbrown5037
    @nickbrown503710 жыл бұрын

    Wow thanks man! great job

  • @raymundomiranda6357
    @raymundomiranda63572 жыл бұрын

    Hola, retire el chip de mi radio y funciono como nuevo, te la rifaste amigo gracias.

  • @michaelcosentino8271
    @michaelcosentino82714 жыл бұрын

    Great video! My 03 express only has the one connector in the back, like the way you have the speaker set up in the video, do I have to make anymodifications to the wiring harness or connections? Please let me know. Thanks!

  • @mobileterminaluser
    @mobileterminaluser7 жыл бұрын

    you hands down did the better & best vid.

  • @rongarasich7887
    @rongarasich78876 жыл бұрын

    Pan, worked great. Thank you.

  • @iraq5359
    @iraq53599 жыл бұрын

    Very helpful....thank you so much.

  • @alfaomega1482
    @alfaomega14826 жыл бұрын

    you are the best and coll tell every one how need help thanks and keep up with good job

  • @22AMOPRO
    @22AMOPRO11 жыл бұрын

    Thank you for the information I am so glad somebody posted the real video of the two videos suck major thank you

  • @antonio1681

    @antonio1681

    4 жыл бұрын

    How to connect it to speakers?

  • @howardgoff2420
    @howardgoff24203 жыл бұрын

    Thank you so much for sharing this information

  • @tblends
    @tblends6 жыл бұрын

    Can you tell me what the smaller plug is for on the back? there is the bigger, standard wiring harness, then a smaller one which is a mystery to me (no install videos have that plug). I'm trying to put in an aftermarket stereo and I don't know what to do with the second plug (since there is only one harness plug input on the aftermarket). I tried to just ignore it and use the standard wiring harness in my car stereo want turn on. Any help is GREATLY appreciate! I'm stuck with my dash apart. I've never seen this two plug setup. Aftermarket stereos only have one harness plug. Thanks!

  • @tmiceli9247
    @tmiceli92477 жыл бұрын

    Thanks so much man. One thing, is there any chance just removing pin 8 will keep the radio presets? Thanks.

  • @ViperJay5
    @ViperJay510 жыл бұрын

    Does anyone know exactly why GM made two different models of this radio? I've heard that you have to get the exact one for your vehicle otherwise it will not work, even if the radio looks the same. Anyone know what's different about them and what makes them not interchangeable? I have a 2005 Chevy Impala and my radio comes without the RDS logo on the display but others display the RDS logo. Is that also a clue indicating that the ones with the RDS logo are the older ones and the ones without are the newer ones?

  • @Blck_tsunami
    @Blck_tsunami7 жыл бұрын

    what about thd ones where the chips are horizontal and vertical

  • @LatinArtist2000
    @LatinArtist200010 жыл бұрын

    Beautiful Brotha!!!!!

  • @blairjosephbernard2011
    @blairjosephbernard20115 жыл бұрын

    I got a 2001 Chevy Silverado radio just plays station but all it does is turn on off just the clock face shows up and that’s it. it’s just like the 2nd chip bored u showed but my question is does the chip sometimes have glue over it. Lol I pulled the 8 leg chip out still does no off with the clock face but no radio station yet :/

  • @127910ashley
    @127910ashley3 жыл бұрын

    Hey i took chip out i used a razor blade pushed down on both sides came right out radio works cool thanks

  • @conoley
    @conoley10 жыл бұрын

    I'm curious about something. After the chip is removed, can you still use the radio to customize the settings for stuff like the Oil Life Monitor, Automatic Door Locks, Tire Pressure Monitor and all the other settings that GM tied to the factory radio?

  • @rickolson5676
    @rickolson56767 жыл бұрын

    Pan I have a question. IO did what your video says to do. Thanks It worked but it reads cal err and then goes away and the radio works in the meantime. Any way of getting rid of that and how about keeping the preset stations.?

  • @jobdaniel
    @jobdaniel10 жыл бұрын

    Hey thank you for the video! Just need to know if i have to do the changes you did with your cables to be able to make it work in my truck?

  • @slimpyman
    @slimpyman8 жыл бұрын

    hey dude, quick question,. LOOKING AND LOOKING HOUR AFTER HOUR, nobody seems to have made a video or pictures for a 2002 chevy tracker or 2001 chevy cAValier with only cd player, no tape. these are the same radio... cannot find a picture or vid, and no idea which chip to remove. both 8 pin chips are horizontal in orientation, one is on upper corner, other is near middle. any suggestions? no writing is on either of these chips

  • @shadowoutlaw9834
    @shadowoutlaw98342 жыл бұрын

    Will this disarm the key to bypass to start the engine? 2002 Chevy Impala changed radio to same kind but car not start due to chipped key radio says fob learn but does not have the fob remote keyless entry . Just a chip key

  • @tntactics
    @tntactics7 жыл бұрын

    I did everything you did in the video but my radio just keep saying error

  • @durangonuevo9608
    @durangonuevo960810 жыл бұрын

    thanks!! just did mine so happy thanks!!!!!!!

  • @carytheis3014
    @carytheis30147 жыл бұрын

    Does presets work after removing and can you explain better on moving wire on rear of radio. Do you have to move wire and tie together to get away from antitheft???? Thank you

  • @alkaholik2222
    @alkaholik22229 жыл бұрын

    My cd player wouldn't eject anymore so i bought a a used stock RDS on ebay. Worked great but was locked. Attempted the fix by removing the chip (newer one in middle of board) like in video and it wouldn't power up again. For a workaround i took the cd mechanism itself out of the locked ebay one and swapped it into my current stock one and it works flawlessly now, so i guess the locking issue doesnt apply to the cd mechanism itself. hopefully this helps someone else.

  • @boblenertz9641
    @boblenertz96418 жыл бұрын

    I pulled my GM RDS radio from a 2003 Chevy Avalanche and was unable to get a working display even though the unit worked while installed in the vehicle. The radio never indicated locked; just no display. I connected 12V + battery power to pins B1 and B2 and Ground to pin A12 on the 24 pin connector at the back of the radio based on what I saw on the video. I also removed the locking chip as shown in the second radio in the video. When I push the power button, the lights on the faceplate illuminate but still no display. I have not connected a speaker at this point since I never got the display to work. Are there any other connections I need to try before giving up on this one?

  • @bellyisis
    @bellyisis4 жыл бұрын

    Silly question...do you know how do rest the “aux” ( the little multi disk icon @ bottom left ) on this RDS radio?

  • @bobtria1468
    @bobtria146810 жыл бұрын

    Fine Job, Worked well for me. Thank you.

  • @CeeStyleDj
    @CeeStyleDj8 жыл бұрын

    Hey bud, I know this os an older video but would you know what would be the latest GM Stereo in this size that would work (all function) in a 1997 Buick Riviera?

  • @thetoddfather5912
    @thetoddfather59125 жыл бұрын

    Worked perfectly 👍🏻

  • @taichimaster21
    @taichimaster219 жыл бұрын

    I'm looking to do this on a 2005 GM Envoy. Does that fall into the group that need the on signal? (From what I gathered, it doesn't, but I just want to be sure.)

  • @dchook100
    @dchook1007 жыл бұрын

    I have the original factory radio without a CD player and would like to replace with a model that has this feature. Would it be possible to simply swap the chips and retain the memory functions with the replacement radio? I would of course find a matching year for the donor radio. Thanks for any input you can provide.

  • @MrOliveira1111
    @MrOliveira11114 жыл бұрын

    Would like to know if you know which wire to cut for the Chime warning noise and a have a low Pressure oil but truck still runs fine

  • @larrya703
    @larrya7038 жыл бұрын

    +Pan Gramercy Do you know where the amplifier is located on this type of radio? I think it's internal, I just know I don't have an external amp that's typically located in-between the rear speakers. My issue is my right side speakers (front & rear) are fading out for a few minutes and then back in repeatedly. I think it's an amp issue. Any idea?

  • @Flo-ie9em
    @Flo-ie9em7 жыл бұрын

    I just purchased a factory radio that came out a 2002 impala for my 2003 impala,now if I do what you're showing me to unlock it,will I be able to program a key fob with it as well??

  • @jeannieflowers5854
    @jeannieflowers585410 жыл бұрын

    question, mine locked after I changed the battery, do I really need to tear the dash and remove the chip for it to work again?? This seems so crazy..

  • @kevinbrooks6265
    @kevinbrooks62654 жыл бұрын

    I did this after putting my 03' impala radio into my 01' impala and I have no sound and no door chimes .any thoughts ??can I run power straight to the amplifier ?

  • @fredmax2541
    @fredmax25412 жыл бұрын

    Thanks for the video.

  • @kennyhonse2017
    @kennyhonse20177 жыл бұрын

    I just soldered a wire to pin 1 applying 5-vdc. I got the voltage from any other chip pin 1.

  • @toddfunderburgh3047
    @toddfunderburgh30478 жыл бұрын

    yep just tried this on a radio exactly like the one with the cassette and cd player. hooked it back up and got a message that just said error, not cal error. It didn't work for me aswell

  • @shirleybrewer3672
    @shirleybrewer36726 жыл бұрын

    This sound great I hope it works ! I see you have a keyfob can you do video about how to set it ,I tried to follow another video about it but it didn't work !

  • @mrkatsumi1000
    @mrkatsumi10005 жыл бұрын

    It worked perfect thank you

  • @josefwtx3606
    @josefwtx36069 жыл бұрын

    I need some help I bought a stock stereo from some guy off Facebook and it locked up on me so I took out the chip like you instructed on the video everything worked but I am not getting any sound from the radio. I have a 2004 silverado. Any help would be greatly appreciated

  • @Tech_481
    @Tech_4814 жыл бұрын

    So I have a question on a non tape deck radio what it's the pinout of the radio for the connector? I need to find out what the pinout for the power allways on and power with the key on then There's a second connector connector that only has 3 wires going to get please help

Келесі