Oh my that illusion orange looks soooo good! I saw another channel try it and ended up with little black hot specs in it. It’s awesome to see what it’s capable of looking like! Keep up the good WORK!

@UnknownCoatings

4 жыл бұрын

I try to avoid contamination as much as possible.

Keep doing what you do....its all awesome bro ...

@UnknownCoatings

2 жыл бұрын

I appreciate it!

Simply the best in this stuff , no hay break

@UnknownCoatings

4 жыл бұрын

thanks!

Crazy how good illusion orange turns out when you take the proper steps to maintain your equipment!

@UnknownCoatings

4 жыл бұрын

haha right?

Simply the best in the business🇬🇧👍👍

@UnknownCoatings

4 жыл бұрын

I appreciate the crap out of comments like this

Great work as always!

@UnknownCoatings

4 жыл бұрын

I appreciate it!

Nice 👌, like the pop ups on settings cool touch very helpful.

@UnknownCoatings

4 жыл бұрын

always tryna help!

Excellent as usual. 🤘🏻

@UnknownCoatings

4 жыл бұрын

I appreciate it!

Glad to see you’re back in business and showing off awesome colors! As always the workmanship and videos are great!

@UnknownCoatings

4 жыл бұрын

back in business? lol

@xXGusDaBus75Xx

4 жыл бұрын

Well, I know you had a compressor failure awhile back that put you on hold for a little awhile. I’m just glad to be getting the notifications for your videos popping back up on my phone!

Good Job my friend 😉👍

@UnknownCoatings

4 жыл бұрын

thanks! I appreciate it!

Awesome video👌

@UnknownCoatings

4 жыл бұрын

Thank you!!!!

That illusion orange is one of the best colors of all time imo

@UnknownCoatings

4 жыл бұрын

yeah its a great color!

Wow the music in this is killer too!

@UnknownCoatings

4 жыл бұрын

Thanks to @NoCopyrightSounds

@BIGSWOLEBEATS

4 жыл бұрын

@@UnknownCoatings whats your email again..forgot I told you that I would send you some music

@UnknownCoatings

4 жыл бұрын

@@BIGSWOLEBEATS unknowncoatings@gmail.com

@BIGSWOLEBEATS

3 жыл бұрын

@@UnknownCoatings music sent bro!

That orange tho. Great work as always

@UnknownCoatings

4 жыл бұрын

Thank you good sir!

I laugh every time I see the sticker on your gun lmao

@UnknownCoatings

4 жыл бұрын

its one of the best decisions I have ever made. I am going to do a farewell video when I change to my new gun for videos. You will enjoy it.

All those finishes are amazing! Really love the teal! But I must admit I'm jealous af that I can't find the extended tip for the Columbia gun that you have....looks like it comes in handy so much. Any idea where someone could find one?

@UnknownCoatings

4 жыл бұрын

im having a few made! I bought the material to make em from, just waiting on machine shop now

Hey, I usually see you hanging wheeks from the valve stem hole but I see yiu hanging from the center in this vid. I'm building a larger oven myself so I can also do wheels and can decide how I want to hang the wheels which will affect the dimensions of my oven. Would you mind offering some insight or advice? Thanks, great channel thanks for sharing!

@UnknownCoatings

3 жыл бұрын

I hang wheels one of two ways, sometimes its color specific or specific to the design of the wheel. Shouldnt effect how you build your oven though

Nice videography and music! I noticed some Farady at the ends of the spokes on one of the wheels as you began spraying. When you finished spraying, it was gone. Could you comment on how you concentrate on these areas to overcome this effect.

@nlfspeed3968

4 жыл бұрын

George Burns would also like to have that explained. I battle with this and I’m not using a hobby gun any more.

@UnknownCoatings

4 жыл бұрын

Yeah I will have to do it in another video probably.- Its just a matter of getting most of the area covered, then dropping KV and upping PSI a little to direct powder into those areas

@georgeburns5811

4 жыл бұрын

@@UnknownCoatings OK, that makes sense. Thanks for the reply

I watch all your videos love the results you get. Looking to start powder coating alloy wheels in the uk. What powder coating system would you recommend to get professional results but not break the bank at the same time. Cheers Roy

@UnknownCoatings

4 жыл бұрын

If you can spend close to 2000 USD, I got a great system. but if not, let me know your budget and I can point you in the right direction

@royakay9804

3 жыл бұрын

Unknown Coatings what make system is it you have? Was looking at spending about £1000 but could go a bit more. I also need an oven and blasting cabinet and possibly a booth.

New subscription from Dubai

@UnknownCoatings

4 жыл бұрын

You have said that a few times lol

@artlabuae7303

4 жыл бұрын

@@UnknownCoatings i used to just like. Now I'm subscribed. 😉

Beautiful color man. So if you see my videos I put powder on thin I feel because I’m worried about putting it on way to thick and getting orange peel. Watching you I feel you put it on thicker. Should I do mine thicker do you think? Or I’m I doing ok. It just looks like after watching u I’m way to thin

@UnknownCoatings

4 жыл бұрын

I will have to check em out. You could always get a meter to check it? Mil thickness gauge.

Great video. Does lowering the voltage 5kv really make a difference on the second coat?

@UnknownCoatings

4 жыл бұрын

i typically just follow the recommendations from the supplier. I cant imagine its a HUGE difference honestly.

@scotth7686

3 жыл бұрын

Unknown Coatings I thought it was usual practice to lower the kv for additional coats.

With the clear vision do you let the wheel cool off to room temp or hot coat 150-250*? Thanks

@UnknownCoatings

3 жыл бұрын

let it cool to room temp

Where’s episode 65

@UnknownCoatings

3 жыл бұрын

its up :)

Does the 10 min start when the parts is at 400 or when you the oven gets to 400 im Trying Prismatic powders Chrome 3 And it turns a dull grey and not more Chrome ??

@UnknownCoatings

3 жыл бұрын

When the part reaches temperature

I need a bigger oven. :(

@UnknownCoatings

4 жыл бұрын

all about progress

you dont get Sand in the Baffles of the Valve Cover ?

@UnknownCoatings

4 жыл бұрын

no but I clay and foil them. I have a video coming up to show how lol

@underestimatedgarage

4 жыл бұрын

🤙🏼 we will stay tuned for that!

How do you determine if a part is magnesium?

@UnknownCoatings

4 жыл бұрын

Put vinegar on it, if it bubbles, its magnesium

@CorkySandpiper

4 жыл бұрын

Thanks for the tip!

whats the main purpose you use like 55kv and lower istead of 100kv?.. just a rookie and wanted an serious answer /// Roger,sweden

@UnknownCoatings

4 жыл бұрын

high kv increases the chance of back ionization. Also the 55kv recommendation is direct from the manufacturer (in this case, @Prismaticpowders )

400 fahrenheit or cercius?

@UnknownCoatings

4 жыл бұрын

F.

Will you sell the gun your using? I live in Vegas and I'd drive up there to buy it from you

@UnknownCoatings

4 жыл бұрын

i will be soon yes

@kylecorrow702

4 жыл бұрын

@@UnknownCoatings ok let me know ill buy it. I wrote you a message on Instagram a few days ago