I want you guys to know I appreciate your comments on here. Video taping these jobs and then producing them turns a one hour job into a four hour job, so it's nice to hear these videos aren't falling on deaf ears

@cdoublejj

4 жыл бұрын

nice to see videos, i've been looking at getting one. but, it seems it is not good idea to put a car with doors and glass on rotisserie ? my car was nearly completed but, no i want to frame stiffeners and under carriage work. without out stressing my back and hours under the car on jack stands.

That karate chop comment caught me off guard. I literally laughed out loud.

Thanks for giving some details on how to install brackets, with modifications as needed. I bought the same rotisserie about six months ago, but it's been sitting because I didn't know if there was a special way to attach the brackets to the car. Thanks for the video, it's a great help! Can't wait for the next one!

Great video, very helpful. I've come back to it several times.

Great video! So much I didn't know. Door braces, remove glass, etc.

This is one of the best rotisserie instruction vids I've seen. Really a huge help. Thanks for making and posting!

@RedlineStands

5 жыл бұрын

Really glad to hear that.

This was great. I learned a lot. Thank you.

Very good.

Good evening, that is a good-looking piece of equipment. Are there larger Caster wheels available to maybe roll that thing outside when you need to? I didn't know you had a crank gearbox on it to rotate it, that really makes it nice to use and work with. That rotisserie is definitely the best way to do the underside of a car. Thanks for a great video, you take care.

Good video .always use lock washers and never use your tools for hammer

Great video, how does the crank handle work for the rotation ?

@RedlineStands

3 жыл бұрын

kzread.info/dash/bejne/hIGb0qWShpmonrA.html&feature=emb_logo This might help

Hoping you can answer this since i can't seem to find the answer with google. The rotisserie I bought (not a redline) has 2.25" mounting arms(measured them myself), but from what i can find all adapters say they're for 2". Are they all really 2.25" ?

@RedlineStands

2 жыл бұрын

The CR-3000 rotisserie uses 2.25" arms, which I"m betting is what you have. This link below shows all the Kernel adapters that can be used with 2.25" arms. Thanks. www.redlinestands.com/catalog/index.php?main_page=advanced_search_result&keyword=kernel&search_in_description=1&categories_id=212&inc_subcat=1&manufacturers_id=48

@Tampainian

2 жыл бұрын

@@RedlineStands Thank you very much, I looked on your website but didn't see these.

Can you advise on why you felt the windscreen would smash when rotating it?

@RedlineStands

3 жыл бұрын

Speaking with professionals who restore cars for a living, they assured me the car would wrap enough the glass would surely bust.

@JessopVTS

3 жыл бұрын

@@RedlineStands how does one go about seam welding or panel repairs if it sags so much? (the chassis I mean)

@RedlineStands

3 жыл бұрын

@@JessopVTS You need to build an endoskeleton so zero deflection occurs

Do you have a rotisserie for a mopar C body???? Need one for 66 plymouth fury wagon.

@RedlineStands

2 жыл бұрын

So there's really no such thing as a rotisserie for a 66' Fury wagon. Any rotisserie will fit any vehicle as long as you build/buy the adapters to connect the rotisserie's arms to the car.

@anythingmotor5081

2 жыл бұрын

@@RedlineStands Do you have a part # that I could look up and find the one that best fits my needs??

@RedlineStands

2 жыл бұрын

@@anythingmotor5081 I'm afraid not. My advice to you is to buy the rotisserie, set the car on tall jack stands, roll up each end to the car, and from there, solve the issue of how you plan to connect it to the car. A 66' Fury is just not a common enough car that I have any experience mounting it to a rotisserie.

Thanks for the great tips. I'll be sure to karate-chop the shit out of my brackets to ensure their strength.

@RedlineStands

4 жыл бұрын

Seriously? Been so long I didn't even realize I did that in a video. Will take your word for it without rewatching. Definitely sounds like something I'd do

@idriwzrd

4 жыл бұрын

@@RedlineStands You should definitely rewatch. It was funny.

@RedlineStands

4 жыл бұрын

@@idriwzrd Well I'll be damned. I sure did. Too bad I didn't catch that engineering test on camera. I feel like that test should have definitely been shared with the world.

😆 Brown line!!!!