UNDERSTAND YOUR HEADUNITS EQ,FADE and BALANCE, CROSSOVER and SLOPE
Автокөліктер мен көлік құралдары
LETS MAKE THIS EASY
UNDERSTANDING YOUR HEADUNITS EQUILIZER or EQ fade and balance crossover and slope
This is a car audio how to tutorial that will show you how to work and understand your car stereo 13 band graphic eq I also go over the fade and balance and how to work your crossovers on the radio and also define what slope means and does for your car audio system
SUBSCRIBE FOR MORE CAR AUDIO DIY TUTORIALS radio removals, radio installs, speaker replacement, speaker installs, car audio reviews and much more.
🔻
Did this video help you? Want to support the Channel? Join me on Patreon and get exclusive content and GIVEAWAYS
www.patreon.com/bePatron?u=43...
🔻
WHAT TO WATCH NEXT:
WHICH WIRE HARNESS SHOULD YOU BUY FOR YOUR CAR: • which car stereo wire ...
HOW TO SAFELY TAP INTO YOUR CAR FUSEBOX: • HOW TO SAFELY TAP INTO...
HOW TO WIRE A RADIO: • Car stereo wiring harn...
HOW TO STRIP A WIRE • How to strip your wires
HOW TO PLAYIST: • how to
🔻
Parts used for this install are:
Kenwood ddx6706-
🔻
Samsung Glaxay 10e amzn.to/2SiKVKI
~Check out my first channel if you love BASS~ / jpsaudio08
🔻
~Tools I Use almost everyday~
NEW Milwaukee right angle driver amzn.to/2t4mDvM
NEW Milwaukee right angle drill amzn.to/2GwZAwQ
Install bay panel removal tools: amzn.to/2Jv4XiP
Install bay Speaker tester amzn.to/2LHOYki
Digital Multimeter: amzn.to/2Hcz111
Milwaukee drills: amzn.to/2Lxvu1y
Пікірлер: 44
Man, this is what I've been looking for. I've never understood how to set a graphic eq or crossover on the radio. You're the only video that went into details about what each thing means. Thank you for that.
Damn this video is 3 years old and still the best explanation on KZread on how to tune your system using the kenwood head unit. Thank you!
By far the best video I have seen in explaining the EQ settings. Seriously, I honestly watched about 40 different video- trying to find explanations in such settings; the why's, hows etc... and was still left confused.! Your video is straight to the point and easy to understand. Now I'm going to properly retune my new aftermarket radio EQ settings...Thanks!!
@jptheinstallguy
2 жыл бұрын
Let's Gooooooooooooo 🤣😂 that's what I'm talking about bruh if you need anyother parts check out www.jpsaudio.com/
Simple video with the greatest directions. Helped tremendously.
I don’t know how many videos I watched….. This one right here was so clear and understandable compared to any other video I watched. Thanks man, Subbed 👍
@jptheinstallguy
Жыл бұрын
Thanks for the compliment I'm glad I was able to clear things up for you
Exactly what I needed to know . Straight to the point . Thanks bud ❤
I was trying to figure out slopes and as you were explaining it and I saw the line on the radio, it clicked! Thanks a lot!
@jptheinstallguy
3 жыл бұрын
Glad it helped!💯
best video I've found that explains this. Thanks..
Thanks bro I know I watched your video and liked it....keep them coming
Very well explained bro, good stuff!
Thanks for the info. I'm new to stereo equipment, especially with cars. I recently installed a Sony receiver that has a built-in mosfet (45W RMS) and an amplified 10" subwoofer. I did some research on how to set up the LPF/HPF slope. Your video is the easiest to understand. I have mine set up the same as you do. I noticed an 80Hz LPF on the sub sounds best for me. I want the lows to just barely be noticeable. I'm not a big fan of blasting/bumping music to the point where the cars next to me are judgemental of my musical preferences 😃
If only I found this video first I wouldn't have wasted my time on the others! Great explanation
You don't know how valuable this was for me! I just got the pioneer 2260nex and everything you just explained was clear and to the point. So thank you!! I subd ya. If you have any info on what my phase button does, I would appreciate a short answer for a guy just getting back into the car stereo stuff again. I know that phase is loaded thing to talk about all in it's self so a short answer is good for me. Lol thanks again!!! Love your videos.
Thanks for the knowledge! I been trying to figure out this slope thing for a while. 😅
Very cool bud!
Damn big Bru you actually saved my dumbass from blowing up audio system stay up and be safe 💯
thanks bud, i couldnt find this info anywhere, i do appreciate it
Thanks for the video ✌
@jptheinstallguy
2 жыл бұрын
Glad it helped
Very informative video! I just installed a alpine ilx-w670 in my 08 4runner that had the factory jbl sound system that I retained. The music sounded worse than with the original radio so I’m going to play with these settings
Heyyy Jp love the video perfectly explained I still need to ask you a few questions
thanks broski.
@jptheinstallguy
3 жыл бұрын
no problem man
Thanks
Does 2 way speakers system with passive crossover needs to tune the Crossover at the Kenwood? Thank you.
Thanks bud, your video was very helpful. System sounds amazing now 👍🏼
What would you reccomend on the crossover for some 6x8 80w RMS speakers? It says they go to 48hz but i get some weird sounds occasionally
just seen this and bro your at 81k subscribers 👏
@jptheinstallguy
4 ай бұрын
Thank you
What do I set it on if I have a single cab 1500 gmc? I’m guessing subcompact, due to the small cabin area?
Sorry for the late question. I noticed that the sw level is greyed out on your radio. I just installed a dmx907s and it looks the same. My subwoofer amp isn't getting a signal. Am I missing a setting to turn the subwoofer on? I'd appreciate any help you can give. Love your videos! Thanks!
What do the gain do on the cross over setting?
so if I want to set my SUB x-over thru my Head Unit, but my AMP doesn’t have an option to turn OFF my LPF, what do I set the AMP LPF to if I want to use the head unit for it’s more accurate numbers?
But how do you the options like equalizer and stuff. I just got the same radio and can’t figure it out?
after i set up everything i hear the speakers from the front and back with alot of distorsion like theres alot of base even though on the cross over i have all the bass down just mids and alot bit of vocals
Which Kenwood Headunit is this in the video?
Why does my stereo only let me mess with the speaker setting in watch speaker only on cd 💿 ?
My eq is not highlighting like your but fader/balance are highlighted
Why is my eq is fade out I can get in it
for subs 40 to 50 hertz is for lows and for big subs look at m video of my 2011 Lincoln Town Car
How about fade & balance when connected to an amp. 2 channel, 4 channel etc...