Uncovering the truth: Is QUAD STAR the Brightest Blade?
Ойын-сауық
Uncovering the truth: Is QUAD STAR the Brightest Blade?
NOTE: I did not use the Tri Star blade I have on hand in this video because the version I have has outdated LEDs and would not properly represent what people would be getting in hand as off the filming of this video.
On this episode we take a looking side by side at the Civilized Sabers Quad Star and get real LUX meter readings between a Standard blade, KR Blade and Quad Star Blade.
Civilized Sabers
civilizedsabers.com/shop
Hanging out at Civilized Sabers
• Tri-Star Blade! The BE...
Tri-Star Run time
• TRI-STAR LIGHTSABER BL...
Xeno v3 Lightsaber used for main LUX readings: Discount Code: OUTPOST5
www.vaderssabers.com/product-...
Follow me on:
/ the_collectors_outpost_
/ thecollectorsoutpost
/www.tiktok.com/thecollectorsoutpost
Email: collectorsoutpost@gmail.com
*****
Disclaimer: Some of the products I review are sent to me as free review units by companies. I want to clarify that I do not work for any of these companies, and I’m not part of their customer service or tech support. In some cases, I purchase products at full price or at a discounted rate.
It's important to mention that I may earn a small commission through affiliate links included below my reviews. These commissions help support the growth of my channel and cover expenses such as the purchase of items like the figures I review, custom lightsabers, product and materials for customizing tutorials, video and photo gear for the studio, and even subscription fees for live-streaming. That said, there is zero, 100% no input from any of the companies or manufacturers on what is in my videos. They do not have any say, and they do not see any videos before they are posted.
I believe in providing honest and unbiased reviews, regardless of how I acquire the products. My goal is to give you the most accurate and helpful information to assist you in making informed purchasing decisions. Thank you for your trust and support.
*****
Пікірлер: 57
Yes I know, "STANDARD" on screen is spelled wrong hahaha. MY BAD!
Great segment, well done brother! In my humble opinion, although brighter, it's just not significant enough to justify the $499 price point. Just my 2 cents on the table.
You are on a roll keep it up 👍
@SpaceWindu
Жыл бұрын
Yes, he is!!!
Thank you so much for that fun test! I think I guessed right at the end of the video as well! Awesome video
@TheCollectorsOutpost
Жыл бұрын
Always fun testing out your blades!
@ArnoldSquashaNigga
Жыл бұрын
Just purchased a Quad-Star Master LaGaipa 💡😎 I’m already going blind afew thousand Miles away
@TheCollectorsOutpost
Жыл бұрын
@spacewindu One of the viewers suggested a better battery 15a. I have one here and I’ll use a proffie and see if it results in higher LUX reading! So there will be an updated test video tomorrow to see if we get even better results!
@SpaceWindu
Жыл бұрын
@@ArnoldSquashaNigga Just saw your order come through. Thank you Mikey!!
@ArnoldSquashaNigga
Жыл бұрын
@@SpaceWindu hell yeah Mano !
Really great comparison - thanks for doing
These videos are well crafted and I enjoy them very very much!! Exactly what I like to see, quality 👍
@TheCollectorsOutpost
Жыл бұрын
Thank you very much!
So sick!!! Man this break down was awesome!!! Thank you for this great review!!!
@TheCollectorsOutpost
Жыл бұрын
Thanks! I’ll be doing an update to this tomorrow. One of the viewer suggested a better battery. I have one here and I’ll use a proffie and see if it results in higher LUX reading!
@agentjtravel_walkthru4205
Жыл бұрын
@@TheCollectorsOutpost so can the Quad blade be used on any hilt?
@TheCollectorsOutpost
Жыл бұрын
@@agentjtravel_walkthru4205 I have briefly tried it in Proffie, GHv3, snv4 and Xeno v3 is what I did this test on. They all work BUT I still have to do a long term test such as what will the run time be on all these and what battery will be best for this cuz it has a lot of LEDs.
Neat to see them all side by side at the end. And i got all 3 right lol
You’re basically paying $500 blade that is definitely brighter and more even, but cuts your run time down to basically 25 minutes depending on color. Personally I prefer to use a well diffused blade with standard strips (not 89 sabers, darkwolf, etc.), which are plenty bright as long as you’re not outside at the middle of the day and you aren’t murdering your battery life. I also got a chuckle out of the idea of putting a $500 in a xeno hilt, which are the budget alternative to Proffie
Amazing test!
@TheCollectorsOutpost
Жыл бұрын
Thanks 👍🏻👍🏻
I'd be interested to see the difference in lux between the tri-star and quad-star or even maybe a photonic blade of either tri or quad thrown in as well.
@TheCollectorsOutpost
Жыл бұрын
Well here’s the thing, I have an older version of the tri star, they have these new brighter LEDs now so I did t feel it would be a fair test to even thought the tri star in on this BUT maybe I should do a video for them two even tho it’s an older version of the LED strips. Let me think about that
I'm happy enough with the standard blades, because I know the hilts with the electronics I have can safely power them without any overheating or surge issues. Especially since some 18650 batteries don't have the protection circuits in them (Ultimate Works don't). I would not trust continuously using the tri or quad blades. Now, if they made an affordable high discharge battery and set up the lightsaber electronics to push that kind of power, I'd be swayed to use it.
It's pretty amazing stuff, I just wish the thing didn't come at the price of 2 neopixel sabers. I can only hope they'll drop some day.
I’d love an update on this with the Pentastar blades by @civilizedsabers. A comparison and how the customization work goes. Can I submit a hilt from any vendor to update its blade?
Yeah the limiting factor doesn't seem to be with the individual LEDs, although it is a factor, rather the duty cycles and other specs that the MOSFET transistors on your controller boards are ran at. Can't recall which blade uses which controller but I'm sure the Quad is -capable- of much brighter.
It's a nice looking blade and all, but according to their website, the blades are 32" max with 400 LEDs, not 500. And honestly, for a shorter blade than I'd normally go for, or even if it was a full 36", $500 is an OUTRAGEOUS pricetag. I get it, they aren't cheap to make, but DAMN. My standard 89Sabers blades are pretty damn bright, and 1/4 the price.
@TheCollectorsOutpost
Жыл бұрын
I know they are rebuilding their website with all the new updates and photos. The quad star now has 500 LEDs with these new LEDs they are using.
I just purchased one 🔥
@TheCollectorsOutpost
Жыл бұрын
Nice! Tomorrow I’m running a test on a better saber with a 15a better that another views suggest and says I may get even better results! So let’s see what I get from that!
@ArnoldSquashaNigga
Жыл бұрын
@@TheCollectorsOutpost sweet !
Looks exactly like the movies
sweet
Are you using the stock 89/Darkwolf setup in those sabers? Cos the batteries are only 10A discharge (when it should be 15A) and the stock wiring gauge also won't fully power the blade
@TheCollectorsOutpost
Жыл бұрын
The saber is a Xeno v3 LGT with 18650 battery.
@KorribanGaming
Жыл бұрын
@@TheCollectorsOutpost yea the stock battery and wiring for LGT sabers are underpowered, this applies to even the basic 2 strip blades. You might get better results on a saber with the right battery and wiring
@TheCollectorsOutpost
Жыл бұрын
@KorribanGaming what would you suggest? I have Proffie, GHV3 I can run a 2nd test on these if you think something would be better
@KorribanGaming
Жыл бұрын
@@TheCollectorsOutpost I looked through your videos, I dont think you have any sabers that aren't dropshipped from LGT, TXQ or 89. Nothing against them, they are great midrange sabers but they are also well known for not having the proper electronics. You would either have to get a saber with a setup from somewhere else (maybe VV or GCS or something custom installed, doesnt need to be first hand cos those will be a long wait) or if you're up for the challenge you can always resolder everything using proper gauge wiring and getting a keeppower 18650 battery with 15A discharge. One thing to note if you're planning on doing it on your own is to do it on a Proffie board, the Xeno boards to my knowledge don't really like the high draws and I've personally fried 2 of mine with just a KR blade so I think something more powerful like a tri star or quad star might cause it to explode lol
@TheCollectorsOutpost
Жыл бұрын
I have Korbanth as well. this has a 15a battery in it. I’m going to run a test on this tomorrow
The next saber I’m goin to purchase is either the latest Luke saber you reviewed or the Vader one, which one would you guys say was best all round?
@TheCollectorsOutpost
Жыл бұрын
Oh hard to say! Hmmmmmmmm.
@kaioverend304
Жыл бұрын
@@TheCollectorsOutpost I know I’m torn haha! Also is golden harvest available in the hilts I’m choosing from?
Hey, I have star killers lightsaber(it has a proffi board)from theory sabers and I was wondering if I could use this with my saber. I have talked to them about it and they didn't recommend it and I'm just here to get a second option
@TheCollectorsOutpost
Ай бұрын
I’ve never had any problems with it. I also use a 18650 15a battery for a bit more power but not needed. The blades to draw a bit more from the battery just due to the extra LEDs.
Where are these quad Star blades available at ?
@TheCollectorsOutpost
Жыл бұрын
Civilized Sabers. Link is in the description
I wanna see what it looks like in daylight.
@TheCollectorsOutpost
10 ай бұрын
Looks like nothing in a daylight just like every other blade. You can’t compete with the sun
It's fantastic that you compared the Quad-Star against a 'standard' blade, and a KR blade...but, WHY no comparison against the Tri-Star? As much as I want to say "great video", I CAN'T. Why? Because the ONLY REAL comparison would have been Tri-Star vs Quad-Star. That is, after all, not only what everyone wants...but, it's what everyone was EXPECTING this video to compare.
@TheCollectorsOutpost
Жыл бұрын
The tri star blade I have is an older LED system in it. They no longer use that brand of LED. They are now using this new LED that is brighter and more power efficient than the one I have here making this one I have on hand no longer a relevant LED set up to measure because it is not what people would be getting.
Definitely not worth $500