This video is exactly what I needed to help understand this functionality. My 4 x 9300 core will be up and running in no time! Thanks!

@MagnusHolmberg-NetSec

4 жыл бұрын

Lord-JP happy to help, good luck with the deployment of the new stack :)

Great video Magnus, thanks for sharing. Please keep them coming, I'm learning a lot from your videos.

@MagnusHolmberg-NetSec

4 жыл бұрын

Desmond Eguakun Thank you :)

This is once again your video helped me to complete one of my Activity.... Thanks you so much for creating this video and uploading on KZread... appreciate your effort.. this is the real use of KZread Platform. (sharing the knowledge and helping somone)

@MagnusHolmberg-NetSec

3 жыл бұрын

Thank you for watching and commenting:) I fully agree, I use KZread myself when I need to look up things, so only right to give some stuff back :)

Thank you... I wanted to see how power supply stacking works and you've showed us. Keep posting these kind of videos..

@MagnusHolmberg-NetSec

4 жыл бұрын

Thank you :)

Thank for the video sir, this mean a lot of help for the technician

@MagnusHolmberg-NetSec

4 жыл бұрын

Your welcome, thats actually one of the reason why i started making these videos. Most tech that manage the boxes never see them. In many cases at most the have seen a pdf doc :)

Excellent video, Sir, thanks for sharing. I needed this information for a switch upgrade that I have to do.

You saved my day! I forgot how to stack it since it has been a while I did some few years back. A good refresher!

@MagnusHolmberg-NetSec

11 ай бұрын

hehe, glad to be able to help :)

Thanks for sharing , very helpful ,appreciated.

Thank you for the video, Thumbs UP👍.

sir, thank a ton!!!! really appreciate your work!!! it helps me a lot visually....

@MagnusHolmberg-NetSec

4 жыл бұрын

Akash Koshiya your welcome :)

@akashkoshiya424

4 жыл бұрын

@@MagnusHolmberg-NetSec sir, if possible can you please make a video on stacking configuration and it's multiple scenarios!! Thanks in advance!!

@MagnusHolmberg-NetSec

4 жыл бұрын

Akash Koshiya sure I think I can do something like that :) been on vacation the last month so haven’t posted anything the last month. Time to get back to it now :)

Super, thaks man, continue upload more videos like this, cool...!

@MagnusHolmberg-NetSec

4 жыл бұрын

thank you :) next video that will be uploaded is the 9200 serie.

Thanks for this practical lesson 👍

@MagnusHolmberg-NetSec

3 жыл бұрын

Glad it was helpful!

Great tutorial. Thanks

Wowww!!! Very helpful. Thanks.

Thank you so much! Came in handy 👌

@MagnusHolmberg-NetSec

4 жыл бұрын

Really BadAim Tomorrow video about 9500 and 9200 will come

Thx you! very good video doing one tomorrow and this was exactly what I was looking for.

@MagnusHolmberg-NetSec

7 ай бұрын

Your welcome! :)

Great Video Magnus

I picked up a tip while stacking a bunch of MS390s: 120G stacking cables have a Cisco logo on the sides that will be right-side-up if you're plugging them in correctly.

@MagnusHolmberg-NetSec

3 жыл бұрын

aha nice tip :)

Great unboxing video!

@MagnusHolmberg-NetSec

3 жыл бұрын

Thank you :)

Really impressive, simple and clear video of how to stack cisco switches..Thank you.. @magnus

Are there any CLI commands required to get more than two 9300s in a stack communicating with one another? I have 4 in a ring topology, but can communicate with only switches 1 and 2. If I attempt to configure (say) "interface GigabitEthernet 3/0/1" or "interface range GigabitEthernet 4/0/1-48", it simply comes back with "Invalid input detected at..." and points to the start of the word "Gigabit". Using the same command on 1/0/xx or 2/0/xx works fine, and tab completion recognizes what I'm trying to do, so my syntax seems to be correct.

@MagnusHolmberg-NetSec

4 жыл бұрын

Michael Darnell i would advice you to check the following page. What need to be done depends on the current status of the switch stack and the new one www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-5/configuration_guide/stck_mgr_ha/b_165_stck_mgr_ha_9300_cg/managing_switch_stacks.html A tip is to check under “Offline Configuration to Provision a Stack Member” And “Effects of Adding a Provisioned Switch to a Switch Stack”

Hi Mate, thanks for the video!

@MagnusHolmberg-NetSec

3 жыл бұрын

your welcome :)

it was very helpful thank you so much

@MagnusHolmberg-NetSec

3 жыл бұрын

Glad it helped!

Many thanks for the knowledge

@MagnusHolmberg-NetSec

3 жыл бұрын

My pleasure

Thanks for the video

@MagnusHolmberg-NetSec

3 жыл бұрын

No problem!

Thank u Sir for video🎊🎉🎊🎊🎉🎊👍👍👍

@MagnusHolmberg-NetSec

3 жыл бұрын

Thank you!

Sir please add next procedure for this switch... I wanna see configuration after unbox

I have installed several switch stacks each consisting of two cisco C9300-48U PoE switches - each physical switch has two 1100W power supplies (PWR-C1-1100WAC-P) . I did not install the powerstack cables thinking I have more than enough redundant power with the two 1100W power supplies. Am I able to install the two powerstack cables without powering down one or both of the switches?

@MagnusHolmberg-NetSec

4 жыл бұрын

Ethan Isenberg yes :) From what I have read and from my own test it’s just to connect it in full prod. I have not experience any issue with it www.cisco.com/c/dam/en/us/products/collateral/switches/catalyst-9300-series-switches/white-paper-c11-741945.pdf “ Adding a new switch to a power stack Cisco StackPower technology adds resiliency to the stack by reserving enough power to bring up the MCU of any Cisco Catalyst 9300 Series Switch. Adding new members to an existing Power Stack (Ring or Star) can be accomplished without service interruption to the existing operational Power Stack. It is also possible to “merge” two existing Rings (e.g., two rings of two merged into a single ring of four) without service interruption to either ring. In all cases - to ensure there is no service interruption - care must be taken to ensure that the ring is broken at only point at a time. Zero-footprint “

@ethanisenberg1

4 жыл бұрын

@@MagnusHolmberg-NetSec thanks!

Hello Magnus, can i adapt this video (Stackcable) on Catalyst 9200 ?

@MagnusHolmberg-NetSec

3 жыл бұрын

Yes, :)

Like flat surface top for stacking cable

HI~ I am lookng the script tutorial for stacking and unstacking for the cisco, plus some more exchange the module from 4 port to 8 port...hopefully can watch your tutorial teaching. Thank you very much.

Nice video

@MagnusHolmberg-NetSec

4 жыл бұрын

Thanks m8

Thank you!

Awesome video as always. Love cool Cisco equipment like this. What for and where would you use this switch?

@MagnusHolmberg-NetSec

4 жыл бұрын

Hi, thank you! we will be using it as a combined cpe (router) and switch for our office network. It may be somewhat overkill but it has a lot of the feature we are looking for. Being able to have 10G uplinks and stacking capabilities and at the same time run BGP and full 802.1x. Meaning we can have the switch adapt itself and change port configuration depending on what we do plug in to it.

4 жыл бұрын

@@MagnusHolmberg-NetSec how does 802.1x make the switch adaptable? An other thing I wonder is, how do you decide what uplinks are needed? Do you just go for 8x10 Gbps?

@MagnusHolmberg-NetSec

4 жыл бұрын

Joel Hållsten 802.1x makes that you can place devices within specific VLAN (layer 2 segment) based on attribute like a certificate or a mab. The VLAN you can then group to a VRF (layer3 segment) The VRF you can then bind to a function or an access. Like you can have one VRF for corporate devices, another one corporate laptops a third on for guest acesss. Then you combine these VRF within a firewall and decide how they should be able to communicate. I made a video regarding zero trust and how to build office network :) Regarding uplinks. (Wan links) We will use 1G uplinks and we just wanted the possibility for having 10g and sfp+ you comes a long way with 100mbit for smaller offices

4 жыл бұрын

@@MagnusHolmberg-NetSec thanks for the reply, now I have new things to learn. I will look at your other videos. So far I have looked at unboxing and the "spine-leaf" videos. As for uplinks, if you have 48x 10Gbps copper ports. I would assume at least one 10Gbps uplink would be advisable. But I guess it depends on where the uplink goes.

@MagnusHolmberg-NetSec

4 жыл бұрын

in bigger office then i would use stacked switches and build a star topology, if the uplinks are 2 x 1 GB or 2 x 10G dosn´t make super big diffrence within a office enviroment. If its a really big office then look for a VSS so that the "stack" can be devided within 2 diff locations. within a datacenter spine leaf with minimum 10G uplinks :) Building porthchannels is always a god ide Alot of times the topology really depends on your physical enviroments, where do you have cabeling etc.

Tkanks bro !

@MagnusHolmberg-NetSec

3 жыл бұрын

Thank you for watching :D

Everything covered

That’s it? A bit disappointing. Anybody can unbox anything. Any config advice? No? Hmmm 🤔

@MagnusHolmberg-NetSec

3 жыл бұрын

Yepp that’s it, like the title say :) Unboxing and stacking.

@TheTwentyFour

Жыл бұрын

This is more for all those CCNA and CCNPs who have never had hands on a real modern switch. 😂