Unboxing and reviewing the Slayer Steam EP Espresso Machine
We received our first Slayer machine here at the Wolff Haus, and Adam unboxed, installed and tested for us.
La Marzocco Install Guide bit.ly/2ufipSw
Additional footage credits: Slayer Espresso Machine
Watch more of our videos by subscribing to the Weekly Vlogg!
bit.ly/2FiHBvl
Shop on-line with Wolff at bit.ly/2AFdNW5
Visit our FB Page at bit.ly/2ADOCDf
Want to get in touch with us? Send us an email bit.ly/2CZF4Up
Пікірлер: 21
The one thing that is a big plus is when installing if two holes are measured and drilled either side, there is a groove specifically designed to hide all power cords and water hoses/drain hoses. This makes the machine so much more aesthetically pleasing being able to see a clear underneath sleek body of machine.
Can someone explain to me why the pump is outboard?
whats wrong with the single handle?
Has anyone found the steam pressure maxing out at 1.5 bar a little annoying?
Most people use the single to have the blind in it for cleaning?
@Dibscoffee
4 жыл бұрын
True and we do too, I'm more a fan of spoutless or naked portafilters for this as it gives the additional option of observing extraction and channelling issues whereas the single spout serves little purpose now that things like 7 gram baskets don't really exist within the specialty market anymore
how come it took 48 hours to install?
Been looking at getting one of these bad boys! What was the actual amperage required for this machine?
@Dibscoffee
4 жыл бұрын
It's a 25 amp for the 2 group and 32amp for the 3 group in this model
@cscollen
4 жыл бұрын
Thanks Adam VB!
@AlDiRa777
3 жыл бұрын
are you already buying this machine?
@razgvozd
3 жыл бұрын
Slayer is pure porn. hehe
@glennpearson4699
Жыл бұрын
Dont…had nothing but trouble with mine
What does it cost?
@XanderStoute
4 жыл бұрын
EP runs ya around $15.5k
Just purchased a slayer steam lp and can honestly say the steam wonds are shit as one side is 9 seconds faster than the other side. Do not buy this machine as it's not built for real world use
@jackgaspari9900
4 жыл бұрын
The steam wands being solenoid activated with a clear pathway means they are accurate to a T. Your problems with the steam arms could either be because the steam boiler pressure isn't as strong as it should be; which can be adjusted in the settings (best to be at 1.4). But the most common problem with the steam wands is that the TIPS are different! Slayer offers a variety of different tips ranging from 3 to 5 hole tips with different sizes. So check and make sure both the steamers have the same tips.
@Sports-media180
2 жыл бұрын
We just got the slayer steam EP the steam wonds are so crap. Hope I can adjust it to make them more stronger. If I can’t wow waste of money.
Please speak only for yourself as a single-spout portafilter is still very much in use both in Italy and the rest of the world outside of US.
@brendansmith
2 жыл бұрын
Pretty sure they're not in the US. I agree with the OP - single-spouted are useless.
@vancitycanucks
Жыл бұрын
Useless