👍 If you found these DIY tips helpful, make sure to smash that "LIKE" button and "SUBSCRIBE" for a steady stream of DIY knowledge! Stay empowered to tackle any project around your home, car, technology, or pool with confidence. Let's get hands-on and make life easier together! 🏡🚗🏊‍♂ #DIYLife #SubscribeForMoreDIYTips

You are a life saver sir. Turning the inlet valve off, letting it drain, and turning on quickly fixed mine.

@diymanual

8 ай бұрын

I'm glad one of the methods worked for you. Thanks for the support.

Cleaned the filter, fixed the problem. Thank you!

@diymanual

3 ай бұрын

Nice work! Happy to hear the problem is solved.

Thanks so much my turbine was stuck and I used the compressed air can and it worked. You sav me a lot of money!

@diymanual

8 ай бұрын

You are welcome. I'm happy to help.

From looking at your setup... it will work but its not the best.....i went to HD and bought a tankless valve kit for under 100.00 it comes with two separate valves for hot and two separate valves for cold. This is used for 1x annual flushings with white vinegar (4 gallons into a 5 gallon bucket and circulate with a 1/6 hp submersible pump)....be sure to take out the inlet filter before you start the cleaning. This is all in the manual that came with your tankless heater. If you have ventilation issues with your unit....such as a code 11 ... you might have to take apart your heater plate and internal heater unit to blow it clean with compressed air and vacuum internally ... then reinstall everything back.....all this can be googled on youtube as some have already have this process listed....i hope this helps your viewers.

@diymanual

5 ай бұрын

I really appreciate you taking the time to share these tips and tricks with everyone. It's amazing how helpful the KZread community can be. Thank you for watching and supporting the channel!

@MrDmadness

3 ай бұрын

Your procedure is far far more correct than this videos . I've been a plumber 30 years

Thank you!

@diymanual

15 күн бұрын

You're welcome and thank you for watching!

Thanks

@diymanual

Жыл бұрын

Welcome

Where do you adjust the temperature??

@diymanual

8 ай бұрын

Mine have the thermostat inside the house.

Let me give you some advice... Rinnai Tankless Water heaters Rarely give Faulty Codes... Also Cleaning regularly is needed, flushed with cleaner or white vinegar, which works fine.. Thanks

@diymanual

6 ай бұрын

I appreciate the advice. It's always helpful to hear from others who have experience with Rinnai Tankless Water heaters.

The correct procedure here is to flush the heat exchanger, the reason youre getting loss of hot is due to mineral drop out from heating that coats the heat exchanger. You need 2 laundry hoses a bucket and a pump and vinnegar. In over 30 years service gasfitting and plumbing ive never had one that the electrical or aqua stat as the problem. Also that "turbine " is calld a flow sensor. This is not fixing, this is fumbling shown in this video.

@diymanual

3 ай бұрын

Thanks for sharing your knowledge and expertise on this topic!

I got it to work again, but it stopped working when I lowered the temp. I'll look at the filters

@diymanual

6 күн бұрын

Thanks for watching and sharing your experience. If it continue to do it you may want to flush your unit as there might be calcium buildup on the line. Let us know how it works for you.

Just curious. Do tankless cause more issues than tank? Seems like these things are pretty much broken computers compared to a tank.

@diymanual

5 ай бұрын

I have 2 tankless heater. 1 never had a problem but this one that I showed need to be reset from time to time. By they way, I love your username. My now teenage son is a back to the future fan and I have given him a Delorean car from Playmobil when he was 12 and he still have it on his computer desk and still plays with it.

@myothercarisadelorean8957

5 ай бұрын

@@diymanual awesome!

@MrDmadness

3 ай бұрын

They require a flushing 2x a year. You can do this in under 30 min.. this video has absolutely zero usefull advice except cleaning the flow sensors inlet filter. If you're not getting hot water it's time to flush the unit. Ife been a red seal plumber 30 years

🎉🎉🎉

@diymanual

13 күн бұрын

Thank You for watching.

❤

@diymanual

15 күн бұрын

Thanks for the love.

.....THESE "ISSUES" ARE NOT WHAT IS CAUSING MY TWH TO CONSTANTLY GO INTO A "CODE" ("E8") = "OBSTRUCTED EXHAUST AIRFLOW".... [WHICH IS NOT ACTUALLY OCCURRING!!... ] WTF?!

@diymanual

5 ай бұрын

Hi! The exhaust airflow issue is with the 2 big pipes on top of the heater that vents the system and the blower inside the tank. Have you tried checking the pipes if there is any obstruction in it? Maybe dust or spider webs or nest? I remember this video I saw years ago so I tried to look it up for you. Hopefully this is your only issue. kzread.info/dash/bejne/nqGrq8mnYcive6g.html If this does not work then it may be time to call the professionals. Please update us if you can. I am interested to know the fix. Thanks.

@MrDmadness

3 ай бұрын

Check your exhaust then, I once pulled a dead squirrel out of a navien exhaust with an auger, it could also be your internal condensate trap where it connects to the airswitch