Unbelievable! Easily Fix Face ID Without Soldering - AY A108 Box Tag On Flex Tutorial Revealed
The Full Tutorial on the Non-Soldering Solution for the TrueDepth Camera Failure. Make sure to watch the full video & pay attention to every step because with one wrong move & you can lose Face ID forever.
💡PHONEFIX is a large Chinese store of tools and consumables for workshops and repair of mobile equipment. Soldering stations, programmers, heaters, separators and other tools on the official store page: www.diyfixtool.com/?ref=vccbr
A108 BOX Repair Programmer Link: www.diyfixtool.com/products/a...
Phonefix Giveaways: www.diyfixtool.com/collection...
A108 BOX Repair Programmer (AliExpress): www.aliexpress.us/item/325680...
The process is simple:
➡Make sure you have the TrueDepth Camera error when you try to setup Face ID.
➡Connect the A108 to the PC
➡Connect the Dot Projector (aka TrueDepth Camera) to the A108
➡Click TEST, if you get IC Fuse error, then this solution will work for you
➡Connect the iPhone to the PC
➡Then make sure to CLOUD BACKUP. Very important to do this step before anything else.
➡Then make sure to have the external power block to the Module
➡And click “Acti” (aka Activate). This will inject voltage into the mosfet & blow it. This is required so it can allow the Tag On flex cable to work
➡Plug in the Tag On flex
➡Click “CLOUD BURN”
➡Then plug in the Tag On Flex to the original Dot Projector Flex
➡Then plug that into the A108 and click TEST
➡If everything comes back normal, then it’s fixed!
Download the AY software at aytool.cn/#/downLoad
Watch their folding flex tutorial videos here: aytool.cn/#/video
Supported models are:
iPhone X, iPhone XS, iPhone XS Max, iPhone XR, iPhone 11, iPhone 11 Pro, iPhone 11 Pro Max, iPhone 12 Mini, iPhone 12, iPhone 12 Pro, iPhone 12 Pro Max
This solution does NOT work for iPhone 13 series.
iPhone 13 Pro Max True Depth Camera repair requires microsoldering.
See here: • NEW JC CHIP Method iPh...
If you truly need a super low cost microscope, try this: amzn.to/3xVIzac
A proper microscope to get: amzn.to/3xW0eyM
▶Subscribe for more phone repair tool reviews & tutorials: kzread.info...
▶Need a repair? Request a quote: www.vccboardrepairs.com/conta...
▶Useful Links◀
Crowdsourced repair solutions: repair.wiki/w/Repair_Wiki
Join my Locals Community: vccboardrepairs.com/locals-co...
Learn to Microsolder (Course): vccboardrepairs.com/90-day-co...
Buy a shirt: merch.vccboardrepairs.com
▶Phone Repair Videos◀
Microsoldering Repair Videos: • How To Fix iPhone 13 w...
Data Recovery Tutorials: • Where To Copy Your iTu...
Phone Repair Tool Reviews: • LIVE! iPhone 6S Plus O...
▶Best Thermal Cam Setup◀
Seek Compact Pro: amzn.to/34I4whX
Seek Stand: vccboardrepairs.com/buy-seek-...
Seek Macro Lens: www.vccboardrepairs.com/buy-m...
▶Best DC Power Supply◀
DT880 (iPhone 6 - XS Max): vccboardrepairs.com/buy-dt880
DT880 (iPhone 6 - 14 Pro Max): vccboardrepairs.com/buy-dt880-v2
▶Social Media◀
Facebook Group: vccboardrepairs.com/vcc-fb-group
Facebook Page: / vccboardrepairs
Instagram: / vcc_board_repairs
TikTok: / vcc_board_repairs
▶About VCC Board Repairs◀
We are a Las Vegas, NV based repair shop who offers mail in repair services for microsoldering repairs & data recovery. Our specialty is iPhone, iPad, Samsung and other mobile devices. We also offer B2B pricing for repair shops. Contact us today for a quote: www.vccboardrepairs.com/conta...
▶Affiliate Note◀
This page contains affiliate links. If you choose to make a purchase after clicking a link, I may receive a commission at no additional cost to you. Thank you for your support!
Пікірлер: 289
PHONEFIX is a large Chinese store of tools and consumables for workshops and repair of mobile equipment. Soldering stations, programmer, heaters, separators and other tools on the official store page: www.diyfixtool.com/ A108 BOX Repair Programmer Link: www.diyfixtool.com/products/a108-box-multi-function-repair-programmer-for-iphone-8-14-pro-max Phonefix Giveaways: www.diyfixtool.com/collections/all?sort_by=price-ascending A108 BOX Repair Programmer (AliExpress): www.aliexpress.us/item/3256804992304669.html
Thank you for the video Jesse! Wonderful information that every repair shop should watch.
@VCCBoardRepairs
Жыл бұрын
Thanks for watching!
Thanks for all your videos/info!!! Yes, a battery video on this would be awesome! Thanks again!!
@VCCBoardRepairs
Жыл бұрын
Thank you!
Awesome and informative video, thank you Jesse!
@VCCBoardRepairs
Жыл бұрын
Glad you liked it!
Thanks Jesse you're always helpful
@VCCBoardRepairs
Жыл бұрын
Glad you think so!
Thank you Jesse, for the review and why not do a battery tag as well ❤🙏
@VCCBoardRepairs
Жыл бұрын
Soon! 🙌
Thank you very much for sharing your knowledge. do you know if it is possible to activate the face id sensor after a change of motherboard? would i need the original face id? thanks!!
I’m definitely getting this tools now, it’s great and I love this price compare to v1se
@VCCBoardRepairs
Жыл бұрын
awesome!
thanks mate as always easy to follow, thanks for uploading the video
@VCCBoardRepairs
Жыл бұрын
Glad you enjoyed it
I've been ignoring this side of things, time to take another look!
@VCCBoardRepairs
Жыл бұрын
It's so easy. You should do start doing them.
@drissdjellali2953
Жыл бұрын
1 more sub
@scottkelvin2435
9 ай бұрын
@@VCCBoardRepairspls can help me,my ay a108 programmer is not showing/telling me to trust the computer instead it says allow and I can't do any face ID repair
Great review did it well , lets see if this thing can fix the battery issue .
@VCCBoardRepairs
Жыл бұрын
Thank you! Appreciate the support!
Whoo! Thanks for this information!
@VCCBoardRepairs
Жыл бұрын
Thank you!
I have the ay as well and the tag on flex is a nightmare. Did my first one and can’t get the dot projector perfectly align properly because the tag on flex is in the way. 12 pro max flex is so long! Also do you know anywhere to buy these tags locally? Also, do you know anything about 13 and 14? I don’t see flexes for those. Thinking of buying ig or ms options….
you are my idol sir,i m jack from malaysia.nice to meet you in here sir
@VCCBoardRepairs
Жыл бұрын
Thank you! Appreciate the support!
thanks so much, I have been able to use it successfully ones. however, the other times, it shows green for all indicators on the AY A108 BOX, but fails on the phone
Hi there! great review! Just bought myself an A108 and a new frontcamera+dot projector piece, canI write into it, or it has to be written into to tag-flex and then attach it to the original frontcamera+dot projector piece? Thanks in advance! A.
@VCCBoardRepairs
8 ай бұрын
No, you don't replace the dot projector You add the tag on flex to the original parts
Thank you sir for sharing your knowledge great video i wish there will be more video in this format like repairing in mother boards ...etc . Again thank y ♥️
@VCCBoardRepairs
Жыл бұрын
Sounds like you've never watched my channel :)
@drissdjellali2953
Жыл бұрын
@@VCCBoardRepairs am a new subscriber and i can say 1 thing i like your contents nicely explained.keep it up i wish to see this channel grow up
Good evening my Jesse thanks for your support, but I want to ask am I go to remove the dot projector tag flex after it’s work or I will keep it there??
@VCCBoardRepairs
8 ай бұрын
Keep it there
Thaank you sir
You always wins hearts❤️❤️ thanks for sharing🙏 but dear !! how to buy it.. ??
@VCCBoardRepairs
Жыл бұрын
Thank you. Links to buy are in the video description 😅
Thanks so much for sharing sir
@VCCBoardRepairs
Жыл бұрын
My pleasure
Hi. Thank you for this video. I just saw this. Can i buy this program with this site in america?
@VCCBoardRepairs
Жыл бұрын
I don't know who in USA sells it. Maybe try contacting injured Gadgets for it Www.injuredgadgets.com
Did the site to download the software disappear? There's 404 error when you try to go to the aytool sites mentioned.
Please can you do a video on the Unkown part of changed batteries 🙏
Hello Jesse with this tool you can program new Face ID or it needs the old one? Thanks for the vid
@VCCBoardRepairs
2 ай бұрын
This requires the original true depth camera
Hi... is possible to read data from broken Face ID and copy data to a new Face ID..!? Thanks.
Could you please explain every Face ID problem and the proper solution ? In this case you had the ic fuse, so it’s possible to fix it just with the flex. When we have ntc break, i2c break etc is it possible to fix it by changing flex ? Thanks in advance
@VCCBoardRepairs
Жыл бұрын
Watch the other Face Id repair videos in my channel & you will learn more about the subject
Hi, great video! I have the exact same problem you had in the first place but can't seem to get the module aligned properly, and I'm sure the flex is seated properly in on the logic board. It worked in the first instance for a week or so then I dropped the phone and saw a different message in settings, so I opened it up and the flex had disconnected. message gone in settings now but same issue you initially had. Any advice greatly appreciated
@VCCBoardRepairs
4 ай бұрын
try another tag on flex
@VCC Board Repairs - Jesse Cruz do you know any other way to test the face i.d before opening it to tell if this will fix like portrait mode ect or using a second phone over the front camera to see if it flashes ??? also do you have any inside know when JC will release there version on this as im wondering should i buy this one for now or not many thanks love your work
@VCCBoardRepairs
Жыл бұрын
Not sure how to properly test without opening the phone. As a repair technician, opening the phone and taking out the front camera assembly should be no problem for you. I dont know about the JC version. I heard it's already out but not sure
@mjfaderway
Жыл бұрын
@@VCCBoardRepairs thanks for the quick reply yeah ive got the jc tool to test them just wanted the staff to be able to check easier ive seen the jc version in pictures but cant find it for sale many thanks again
hi i'm struggling with that. I have 2 questions : do you think the little flex addin can be used twice ? on 2 different front cam modules ? Second question : I have a module that is all green when plugged on the A108 without the addin. I perform the procedure well it seems but it doesn't solve the face id problem.
@okafordaniel7103
11 ай бұрын
It was said in the video that if everting is normal then maybe it board issues this only works if NTC AND I2C are normal
Hello, sorry I'm a french guy I don't understand everything. But if you have a jc v1se solution or equivalent do you prefer buy the JC solution in few weeks or do you buy this one now ? Thanks a lot.
@VCCBoardRepairs
Жыл бұрын
This one seems to work fine. Up to you if you want to wait for JC. It's going to do the same thing
@starndustone
Жыл бұрын
@@VCCBoardRepairs oh sorry! Today disponibility on Aliexpress! Yesterday don't. Thanks
I love your multimeter holder, can you please leave a link where I can get it?
@VCCBoardRepairs
Жыл бұрын
It's actually an iPad Mount that I zip tied my multimeter to: amzn.to/3Y2k0D7
@wucollins1727
Жыл бұрын
@@VCCBoardRepairs thank you
Can the jcid v1se do the same with software upgrades? No soldering ?
@VCCBoardRepairs
Жыл бұрын
You would need a new activation board for it.
First! Hope this will fix my iPhone X that I retired due to the Face ID no longer working. Had it sent off to have the dot projector replaced by a board repair service. They got it working but told me if it ever stopped working again it couldn’t be fixed.
@VCCBoardRepairs
Жыл бұрын
If the dot projector was modified previously, I don't think this solution will work
I would love to see the battery repair and how it is done
@VCCBoardRepairs
Жыл бұрын
I'll do it next time I get one of these repairs in
Bonjour, si après ca l'iphone veux toujours pas activer face id ? le soucis viens d'ou ? merci
Does the FaceID work if you put a tag on flex on a compatible front camera assembly replacement Or does the tag on flex work only on the original camera?
@VCCBoardRepairs
Жыл бұрын
It's only for the original Dot Projector (aka True Depth Camera) It's not for the front camera at all
I have a question with this, will it no longer be necessary to replace the circuit that goes in the DOT flex or is it always necessary in some cases? greetings from Guatemala
@nevillelopez7727
Жыл бұрын
I already solved my doubt at minute 5.52
@VCCBoardRepairs
Жыл бұрын
awesome.
awesome
@VCCBoardRepairs
Жыл бұрын
Thank you! Appreciate the support!
We have these devices and flexes too, How can I cooperate with you, we are a repair tool company from China
Hi is this possible with repairing iPad Pro 3 11” and do they supply tags ? Thanks
@VCCBoardRepairs
Жыл бұрын
Sadly, no tag on flexes available for iPad Pros.
@michaelmccrudden2532
Жыл бұрын
Thanks for your speedy reply!
Great content. As a tech starting out. limited cash. I'm looking for the least and easiest way to fix face id, true tone, genuine messages. what would you recommend?
@ML-pp8zw
9 ай бұрын
im asking which programmer/ tool would you buy if you had to buy one tool.
@VCCBoardRepairs
9 ай бұрын
I would say there's no 1 perfect tool. It's part of being a phone repair tech. Have to buy different tools for the different jobs.
Is there any solution for iPad 11 Pro 2020?
So i recently bought a used iphone 11 pro 64gb from a local off marketplace for $30, screen needed to be replaced (black screen) and it was supposedly stuck in recovery mode, however i was able to restore the phone which is unlocked with no activation lock, I replaced the screen successfully with a generic one off Amazon, to find out the face ID has a detected issue during setup. So I immediately thought the issue was the actual face ID sensors that mount to the back of display. In part I believe that sensor did need to be replaced as I noticed that the phone was getting hot when the face ID flex cable was connected, I disconnected that flex cable and the phone was no longer getting hot; I ordered a generic replacement face ID sensor assembly off Amazon last night and installed today to find out that the issue wasn't just that sensor for the back of display, but I believe the true depth camera you are dealing with in this video. Also I don't know if it matters but i never reassembled the phone as I don't want to have to lift the screen from the casing. How expensive of a fix you think it would be at a local repair shop?
@VCCBoardRepairs
10 ай бұрын
It would depend. If you replaced the true depth camera or it's not original, then there's no way to repair Face ID Pricing would range between $100-200 i would suppose
@OneStopShopGarage
10 ай бұрын
@@VCCBoardRepairs I appreciate the response bro. Yeah I’m not sure whether it’s the genuine apple true depth sensor that’s in there or not.. the phone’s exterior appearance seems like it’s in great condition. But when I got around to disassembly I noticed one of the two screws on the bottom by speaker ports was missing.. I noticed some brackets and screws that were for securing the display’s flex cables into place as well as the battery flex cable cover plate were missing after opening it up.. luckily I was able to find a whole internal hardware set for the phone on Amazon for $5. But yeah is there a stamp/logo I can look for on the true depth camera sensor? I snapped the phone back together in the event the metal contact from the Face ID sensor on back of display needed to make with that of the True depth camera system’s metal bracket or something to get reenabled. No such luck tho 😞
Does this method help if the iphone is stuck in the "move lower/higher" face ID setup? Or just the "problem detected with TrueDepth camera" error?
@VCCBoardRepairs
3 ай бұрын
Just true depth camera error
Your best
@VCCBoardRepairs
Жыл бұрын
Thank you!
hi, great video. appreciate it man. noticed the 9 tries(?), what happens when it runs out? need to pay or subscribe to anything?
@VCCBoardRepairs
3 ай бұрын
Each cable has 10 tries You only need 1 per cable/device
@mohdsyafiqbinnazmi9323
3 ай бұрын
@@VCCBoardRepairs great info tq. i wanted to invest into this programmer since I'm getting more iphones for repair. tq again
Thk bros.
@VCCBoardRepairs
10 ай бұрын
You're welcome!
Can the AY A108 reprogram an iPhone 11 Pro flex cable sensor module(flood illuminator) or is it only limited to the true depth camera module. I am trying to restore Face ID
@VCCBoardRepairs
Жыл бұрын
Only true Depth Camera (dot Projector)
@Viacell__Unlockk
Жыл бұрын
Message👆👆On Instagram. He can help you fix your device remotely
hello, can it make another original apple face id dot projector to work on Iphone 12 mini ? (the original dot projector is destroyed WITHOUT backup)
@VCCBoardRepairs
9 ай бұрын
No
I did face id repair but i don’t know how to fold flex for 12 Pro max can you plz tell me?
D chip short how to backup d chip data with aY a108 tool , no have another tool
Bro great video. Could you do a video about how to restore True Tone?
@VCCBoardRepairs
Ай бұрын
I have one: kzread.infoOI7aHTbdmMU
@riyanwhyte8365
Ай бұрын
@VCCBoardRepairs bro, thanks for the reply. Do you have one for ay a108 tool exactly or the process is basically the same?
How can we tell if this is the issue with Face ID? On my iPhone 12, Face ID is disabled (as shown in the video) and when trying to take a Portrait Mode selfie, it keeps saying "Move farther away." Is this likely an issue with that part? Is it likely repairable through this method?
@VCCBoardRepairs
Жыл бұрын
If you get the same error I show in the begging about the true depth camera has failed, this method should work, assuming there are no other issues
So do you need credits? How do you purchase and how much is it?
@VCCBoardRepairs
10 ай бұрын
You don't need credits
gracias crack
@VCCBoardRepairs
Күн бұрын
De nada
hello, my iphone 12 pro max i think got water into it, and now the truedepth is not working and my phone is very dim, cannot change brightness. will A108 and replacement piece fix it?
@VCCBoardRepairs
Жыл бұрын
Brightness issue is due to problem with ALS. AY tool will not fix that It will only fix the TrueDepth camera failure
Can this method fix “face id not available, try setting up face id later” error?
will the machine still work if the front camera was replaced previously???
@VCCBoardRepairs
4 ай бұрын
This requires the original dot projector and IR cam. Otherwise it won't work
Is there a non-solder method for a damaged infrared sensor flex?
@VCCBoardRepairs
5 ай бұрын
Nope
hi can you help me identify the problem -- What is the cause of the mistake ------> there are same copies in server cannot backup --- and -----> I2c break
What I want to do is truetone but don,t have a genuine display I can't download the truetone file. I get a download 1.8 error. Please tell me why. I'm really in trouble. The system I'm using now is * AY108 * windows10/64bit computer *
How to change this IC Data to ic fusing? I get different data name for that, what that means?
@VCCBoardRepairs
2 ай бұрын
Not sure
Does it work for the lightsensor ?
@VCCBoardRepairs
9 ай бұрын
this video is about the truedepth camera repair only.
The burns remaining is just for that tag on not credits been doing these for a couple weeks now it’s a time saver for sure. Also could we get a tour of the new setup 👀
@VCCBoardRepairs
Жыл бұрын
Haha yeah i figured that out after i recorded the video. Burns are for the tag on flexes :) And yes, once i"m fully all setup, i'll make a quick tour video
A108 BOX Restore programmer allows you to read and write information about Apple iPhone's battery, Face ID, and other data. The battery detection board and the dot projector detection board are compatible with our phone repair programmer.
mYy Iphone XS front camera replaced from other XS still can fix the Face ID?
@VCCBoardRepairs
11 ай бұрын
Most likely no :(
Can the tag on flex be removed after you got face id workinh or do i need to connect the TOF permanently?
@VCCBoardRepairs
Ай бұрын
It must remain permanently
o programa nao conhece o meu iphone 11 pro, alguem me ajuda?
does jc v1s pro can do this programming ?
@VCCBoardRepairs
4 ай бұрын
Yes but you have to use JC flexes
@jaymartinez910
Ай бұрын
@@VCCBoardRepairsDo you recommend this one or JC?
Tried the process but it did the same issue as what you had on the video where after I placed the tag on flex it shows "move higher or lower". Tried taking it out and double check it passed the test but still same issue. What resolution you did to fix that issue? Thanks
@VCCBoardRepairs
Жыл бұрын
Great question to ask in my group: www.vccboardrepairs.com/vcc-fb-group
@DaKabayanTek
Жыл бұрын
@@VCCBoardRepairs thank you will join the group
@markaffleck4622
Жыл бұрын
Hi. I have the exact same issue. Did you find a fix? Thanks
@DaKabayanTek
Жыл бұрын
@@markaffleck4622 i just replaced the tag on flex, did the same procedure and it resolved the issue
@Leozanelato
11 ай бұрын
Same issue here
Did you ever find out about the activations remaining info?
@VCCBoardRepairs
Жыл бұрын
Yes. It limits how many times you can activate based on the device. Every new device will give you new activations. You dont need to buy any credits
Can someone use A108 with out computer to restore true tone
I have a 13 pro in great condition but Face ID does not work and it’s not software related, I may try this out thanks for the video
@VCCBoardRepairs
3 ай бұрын
This solution is not for 13 and newer
have you had error while trying to activate? mine cant get to activate any flex
@VCCBoardRepairs
Жыл бұрын
Make sure you have the external power cable plugged in
Hello Jesse, I follow all you steps but I am getting error "I2C break". is that normal or i am doing something wrong, please help
@VCCBoardRepairs
Жыл бұрын
Make sure to update the software. If you still get that, then the issue is something else within the dot projector
I wanted to ask you, I bought a programmer, but during the firmware I accidentally disconnected the cord, now the programmer does not turn on, what can I do?
@VCCBoardRepairs
Жыл бұрын
That was a bad idea. I'd recommend contacting AY directly or the seller of the programmer for support
@sfflle4903
Жыл бұрын
@@VCCBoardRepairs ok Thanks
I’ve done all you have said Had all matching so far until you test the tag on flex once connected to the camera After test it’s days abnormal What am I doing wrong please
@VCCBoardRepairs
10 ай бұрын
Don't test. Just install and see if it works
do you perform repairs for customers? If so, how can you be reached?
@VCCBoardRepairs
11 ай бұрын
Absolutely! Send me a message for a quote: www.vccboardrepairs.com/contact
@corneliusd3688
11 ай бұрын
@@VCCBoardRepairs Great. I just sent you a message from Florida.
@corneliusd3688
11 ай бұрын
@@VCCBoardRepairs I sent my info 5 days ago. no one got back to me. still waiting. thanks
@VCCBoardRepairs
11 ай бұрын
Check your spam folder for my reply
@corneliusd3688
11 ай бұрын
@@VCCBoardRepairs You were right. the message was in by junk folder. I responded to your questions. thanks.
my ay108 after update dead, please help me
I have all the symptoms of a failed truedepth camera (portrait mode not working, no red flashing light, 'face-id unavailable') except for the error message, will it still work?
@VCCBoardRepairs
Жыл бұрын
That sounds like a different issue
@yveslauwereyns6677
Жыл бұрын
@@VCCBoardRepairs any idea how to fix it then? I haven't been able to find someone else with the exact same prompts.
When I2C is disabled, how to activation? T.T
Can I program my FaceID from my old phone to my new Unlocked motherboard?
@VCCBoardRepairs
9 ай бұрын
No
Hey man, can you make a updated video for the 11 pro max, I don't have the original screen but let me know if this still works
@VCCBoardRepairs
Ай бұрын
You dont need the original screen.
@FGV_Gravity
Ай бұрын
@@VCCBoardRepairs oh thanks, by the way, do you have a tutorial of the battery percentage restore? I’m looking to replace the battery because my old battery is significantly downgraded (30%)
@VCCBoardRepairs
Ай бұрын
Yes on my channel search for bms swap
I see a 13 pro battery flex but not Face ID? Do you have that
@VCCBoardRepairs
3 ай бұрын
I do not
I didn’t expect the programmer to be that cheap! Either way, I think I’m going to wait for JC to realease its version since I already have the V1SE
@VCCBoardRepairs
Жыл бұрын
Yeah me neither. I mean, it's so cheap, why not just buy it? vs waiting for the JC one lol
@rodrigomaero
Жыл бұрын
@@VCCBoardRepairs i guess you’re right but with our local economy going down in flames, every dollar counts 😜
@waynetaylor2784
Жыл бұрын
@@VCCBoardRepairs can't the v1se be upgraded to do the same?
Bro Iphone 13 pro and 13 pro max supported??
@VCCBoardRepairs
Жыл бұрын
Not all the moment
i have imac installed virtual windows but this soft wont open, gives just some number error, any tips?
@VCCBoardRepairs
9 ай бұрын
Try a Windows laptop
@fucidinacid
9 ай бұрын
worked like a charm @@VCCBoardRepairs
I have the assignment issue, 😢 try 3 phones , issue still there saying move up move down and move closer 😢
@rodrigoeduardovega8915
5 ай бұрын
Alguna solución?
@user-so2vw8pm6x
2 ай бұрын
Update firware without data safe
The Best is the RP30 Programmer
@VCCBoardRepairs
Жыл бұрын
Why?
In my hand JC V1se any hope???
@VCCBoardRepairs
Жыл бұрын
JC has their own solution for this
@mastertirur930
Жыл бұрын
@@VCCBoardRepairs without soldering available in Jc products??
@VCCBoardRepairs
Жыл бұрын
I think so.
Support iphone 13 pro max ?
@VCCBoardRepairs
7 ай бұрын
no
what to do when you run out of burns /activations ?
@VCCBoardRepairs
6 ай бұрын
Nothing. You get new ones on every tag on flex
Sir how i can change language in this tool chinese to english
this will work on iphone 13 pro max?
@VCCBoardRepairs
Жыл бұрын
No
okey i found the problem, this AYrepair software works only for me on windows 11, before i install it on windows 10 and it did not work complete ... now i have another problem : i did all the steps you show us till to test after connecting the flex cable together with the dot projector (glas) and it give me a error result with "luminescence abnormal" 😩
hir i canot gat verify code
Please sir Help me with the tutorial of the installation of AY software. I have downloaded it but is not working Please help me sir
@VCCBoardRepairs
Жыл бұрын
Great question to ask in my group: www.vccboardrepairs.com/vcc-fb-group
when i plugged in my iphone XS, AYrepair don't find the phone, whats could be wrong?
@VCCBoardRepairs
Жыл бұрын
Make sure to have iTunes installed. Does 3u tools deteect the phone?
@razorhead2008
Жыл бұрын
@@VCCBoardRepairs yes i have itunes on my computer and it works for me only with windows 11
Hi guys I have error message “hv power abnormal” at 7:08 of the video. Can anyone help please? I have the reader plugged into mains socket
@adamdix8478
Жыл бұрын
For anyone facing this issue I had to change the UK plug adaptor!
@VCCBoardRepairs
Жыл бұрын
Ah interesting. Thanks for sharing the solution