REFOX RP30 Restore Programmer For iPhone shop.rewa.tech/detail/refox-rp30-multifunctional-restore-programmer-for-iphone.html?YTB0209&RP30

@nadimali5275

Жыл бұрын

Next tag on flex for display message

@pratikvadhwana2131

Жыл бұрын

Only this one link has all the components used for fixing it? I have similar issue where the Face ID stopped working after water damage.

@rewatechnology2008

Жыл бұрын

@@pratikvadhwana2131 The link covers the programmer and tag-on flex cables.

@henriksvensson2836

7 ай бұрын

@@user-br8fs3fx2e What? really? I was planning to order Laser. What happened with your orders? Still no service?

@user-br8fs3fx2e

7 ай бұрын

@@henriksvensson2836 No They clear all..

Hello will this programmer have extension for earpiece reciever flex for Face ID and True Tone repair?

Is there a non-solder method for a damaged infrared sensor flex?

What does I2C break means?

Terbaikk akhirnyaaa

Nice hope more compatibility on 13 series and 14 series

@rewatechnology2008

Жыл бұрын

Hi, tag-on flex cables for iPhone 13/14 series are coming soon. :D

What isthe name of the device you checked the parts of the iphone

My iPhone xs max flex cable earpiece is damage ,can i use tag on flex to trick face id for proximity sensor changewith the new earpiece speaker

I have iphone xr locked with icloud and i change just motherboard 128gb and is working very well but the problem is the face id is not working bcs i change logic board and i put a new one so it will work if i do the same process in the video to fix that Face ID Thank You

The data from it's ic can't be read can it be fixed with the tag on flex?

Hello brother, how to install tag on flex on dot projector cable, i don't understand how do

Is it a must to use redox rp30? Or can I use i2c programmer to?

This problem happens when the board is changed, right?

Does this work for water water-damaged iPhone?

Finally!!!

Can you do this without the original Face ID cable and flex and program to a new module?

@gsaro

Жыл бұрын

Doubt it

nice

I guess this fix shows MOSFET gate signal control was the problem? And this fix repair the gate side?

Hello i need to change my microphone but i will lose my face id can i with this device copy the face id to another part ?

Were I can buy this tag on flex cable for each phone series ? How about elimination flood illuminator soldering ?

@rewatechnology2008

Жыл бұрын

Hi, the cable is for fixing the dot projector fusing problems. For the purchase link, you can check the video description box.

Ok, I just bought RP30 and there is no " High Voltage Power Cable". What voltage this should this be? Also "Snap the dot projector cable to the programmer" is missing, I have only a cable that needs resoldering. Please advice!

@rewatechnology2008

Жыл бұрын

Sorry for the inconvenience, please do feel free to contact our after-sales team at: service@rewa.tech.

What was the original problem with the projector that was fixed by the tag-on flex cable? If the projector is damaged, how can that be fixed with the Tag-on Flex cable?

@rewatechnology2008

Жыл бұрын

The dot projector was fused. The tag-on flex reads and writes the original data to make the Face ID work again.

@KimoKimochii

Жыл бұрын

exactly that’s my question, what does a fused dot projector actually mean, there’s no work done to the dot projector for this repair so it means there’s nothing physically wrong with it? the tag on flex just somehow bypasses some check the phone does?

do i need the original module? since i ripped my old module cable and now using a replacement module therefore face id is disabled

@HotDamnBPRockss

10 ай бұрын

Yes bro from my conclusion when replacing the logic board it’s best to buy a new that comes with the facial recognition board

can any of u help? my refox rp30 wont recognize the iphone, any clues?

Saya dari indo Trimakasih subtitle bahasa indonesia...jadi saya paham

I am an iPhone repairman in Korea. I'd like to buy this FaceID recovery solution, so please let me know how

My iPhone 12 Pro Max has a face ID problem on the True Depth Camera section, and my portrait front photo can't be used, can I solve it this way or do I have to use a wire jumper on the Mosfet

@enriqueztimothyjhon8831

3 ай бұрын

i just check mine, and Now im facing the same problem

Hello sir I’m an admirer of your work. How can I get this device? I’m based in Nigeria 🇳🇬

@abubakarshinaka

Жыл бұрын

Send Dm

after everything is good to go , thus tag flex is also be plug to the motherboard of the iphone ? please need answers

@rewatechnology2008

Жыл бұрын

Yes,you need to fold the cable and plug to the motherboard.

sir i want to buy this device and this item how much will it cost me

Anyone? Do thia work on icopy?

A small error - it is not "jumping wire", it should be "jumper wire", right?

what if i replace the whole set face id with new and i miss place the original parts of face id can we still fix it without the original which is broken and missing or misplace?😊

@yohannoel3852

4 ай бұрын

Nope

what if the problem appears after changing the motherboard, can I use this tool?

What if the original dot projector is done / destroyed/ swapped with a different one is it still possible to fix with this programmer ?

@LeeMooEez

11 ай бұрын

Not possible..need the original part

mine doesnt show me serial number and wont let me activate, aany help?

Que nivel 💯💯💯🔥🔥🔥

cool

Does this work if the flood illuminator was not working 🤔

@rewatechnology2008

Жыл бұрын

Hi, the cable is designed for fixing the dot projector fusing problems. It can not be used to fix the flood illuminator.

I want to buy but I try to sign up it won't accept my email address it always says write in correct format !! :/

@rezayudhistira

Жыл бұрын

Have you tried simple domain like Gmail's? Some company rejects custom domain unfortunately.

So this fixed a bad/damaged dot projector? How does it do that?

@rewatechnology2008

Жыл бұрын

The dot projector's data was read and written on the tag-on flex cable to make the Face ID work again.

@mrsemifixit

Жыл бұрын

@@rewatechnology2008 Using original dot projector?

@rewatechnology2008

Жыл бұрын

@@mrsemifixit Yes!

The tag on cable for the battery ,why do you need them?

@RikyyThePootisSlayer

Жыл бұрын

Afaik it's a bypasser, the charge gets through and communicates with the PCB the health and cycles, preferably 100% and 0 respectively. It's a solution for refurbish shops.

So when I’m trying to repair a Face ID. I follow these steps: 1) plug in flex, plug 108 into computer 2) hit test: everything says abnormal except NTC & I2C, they say normal 3) then I hit back up, that’s successful 4) plug a108 into power 5) then I hit activate, the process starts then I get a message that says: “Abnormal, please remove extension flex cable, or use chip to repair” How do I resolve this issue? Is there a support forum ?

@ari_jupiter1298

8 ай бұрын

same problem with me, any solution?

@henriksvensson2836

7 ай бұрын

Yeah no forum for Rewa? Scammers?

cuanto vale

Having issue saying server abnormal

só força

I restored my Face ID using this method , thank you 🙏🏻 advancement

@abubakarshinaka

Жыл бұрын

Got it delivered here in Nigeria

@adesinaolalekan6829

Жыл бұрын

Really please how I need it 🙏

@abubakarshinaka

Жыл бұрын

Dm @abubakarshnk

@nservices

6 ай бұрын

​@@abubakarshinakawhere is your location...?

Does this help when needing to change Ear speaker on some models causing loss of FaceID if you don’t transfer over the cable?

@rewatechnology2008

Жыл бұрын

The solution is for fixing dot projector fusing problems. What you described is mostly the broken earpiece speaker flex during screen replacement. In this case, the only solution is to change the flood illuminator flex cable. kzread.info/dash/bejne/lH53169_lbjPd7g.html

Can someone explain the actual cause of the fused dot projector? how does this happen? does apple just randomly disables the dot projector? by looking at this repair it looks like the there’s nothing physically wrong with the dot projector and the tag on flex just bypasses the check apple uses to disable the dot protector?

@Mircoblaze

Жыл бұрын

Due to the high sensibility of the sensor and the all camera module in general, it can break very easily if the phone drop on salty water or from high heights

@Saleh94S

8 ай бұрын

ok but the question is how can you fix a hardware issue with a software solution? @@Mircoblaze

@Mircoblaze

8 ай бұрын

@@Saleh94S cause the data where stored into the cable, before this metod the only metod avaible was micro-soldering the old cable on the new face-id module, btw you can repair the face id only if the dot projector cable work

@Saleh94S

8 ай бұрын

@@Mircoblaze can you test the dot project cable without opening the phone?

@Mircoblaze

8 ай бұрын

@@Saleh94S sure, open the camera and go to potrait mode on front camera, if the square become yellow, the dot projector work, or a second way is : go to front potrait mode and with a second phone open the camera and aim to the notch if you see a red light beside the front camera ( on the notch) the dot work, but just the cable without opening no im sorry

Ozbekistanga zakas qilsam keladimi

its still work even if the prism on the dot is break?

@rewatechnology2008

Жыл бұрын

You will need to replace the prism firstly.

@B13TECH

Жыл бұрын

@@rewatechnology2008 ok

Where can I buy the add on board?

@rewatechnology2008

Жыл бұрын

shop.rewa.tech/detail/refox-rp30-multifunctional-restore-programmer-for-iphone.html

@krantikoganti

Жыл бұрын

@@rewatechnology2008 the link to the add on board doesn’t have the high voltage connector as shown in the video. I have refox programmer. I just need the add on card shown in the video . Please, send the link

@rewatechnology2008

Жыл бұрын

@@krantikoganti Hi, the high voltage connector comes with the extension board. Since you have the REFOX programmer, all you need to purchase this time is the extension board and respective tag-on flex cables.

JCID too?

@rewatechnology2008

Жыл бұрын

The solution is available to most programmers now. In this video, we use the REFOX RP30. shop.rewa.tech/detail/refox-rp30-multifunctional-restore-programmer-for-iphone.html

@fixerv1ce

Жыл бұрын

@@rewatechnology2008 can you do some jc videos to?

@rewatechnology2008

Жыл бұрын

@@fixerv1ce The operation details are basically the same.

@inotch7414

Жыл бұрын

What is the high voltage for,? Because the jcid programmer don't have it

@fixerv1ce

Жыл бұрын

@@inotch7414 jcid has released newer moduel for tag on face id repair

Если я правильно понял ,то эти товарищи подают на проектор точек ток чтобы отгорело то что ушло в замыкание ,а потом через шлейф-обманку имитируют нужное сопротивление .

@user-dp1xi4jh3c

Жыл бұрын

Да, я тоже про это подумал)

@adam095ak

Жыл бұрын

Интересно есть такой шлейф для jc v1se?

@NoName-wt4hw

Жыл бұрын

Это фэйк?

@kamenton

Жыл бұрын

А куда стык шлейфов спрятать?

@gpucluster3748

11 ай бұрын

Нет, просто есть цепи с высоким напряжением, на программаторе нет стэп ап преобразователя. Либо память размещена в одном корпусе с микросхемой требующей 19-24 вольта, что применимо к подсветкам , коей и является дот проектор. Для чего нужен таг он ? Для того же, для чего и подобный шлейф при замене батареи- подменять данные на шине, что якобы фокус не имеет проблем.

where could i buy this flex?

@rewatechnology2008

Жыл бұрын

shop.rewa.tech/detail/refox-rp30-multifunctional-restore-programmer-for-iphone.html

@nservices

6 ай бұрын

​@@rewatechnology2008Can i buy and use the flex alone without RP30?

Hello

are you hugh jeffry?

How can i get get the refox programmer , im from nigeria

@abubakarshinaka

Жыл бұрын

I have one contact me via email

@adesinaolalekan6829

Жыл бұрын

Hello please I need 🙏

That means you can now swap a bad face id module and transfer the data to a working one?

@rewatechnology2008

Жыл бұрын

As the infrared camera is still linked to the board, you can't just swap the Face ID.

I want to buy this programmer?

@rewatechnology2008

Жыл бұрын

shop.rewa.tech/detail/refox-rp30-multifunctional-restore-programmer-for-iphone.html

Easy fix bypass

Sir, I have many problems with data connection on my phone, just restart the data, but when I turn off the data, the data does not turn on, but why phone model samsung s10 Greetings from Bangladesh

❤️

❤❤

Whats the name of this programmer?

@Qogicx

Жыл бұрын

refox rp30, you can find it on rewa store

@danielgluchow5426

Жыл бұрын

@@Qogicx not working with refox rp30!

@rewatechnology2008

Жыл бұрын

REFOX RP30 must work with the extension board and respective tag-on flex cables to fix the dot projector problems. For detailed info, please check the below link. shop.rewa.tech/detail/refox-rp30-multifunctional-restore-programmer-for-iphone.html

Греют и вскрывают прибором телефон без проклейки вообще))

Very complicated.

already buy ahahhahaha

Sir i am watching video from Pakistan plz sir add urdu subtitle language