Just loved your video I was glad you came back to the ktchen for the finals . Oh there is a gost in your fridege @18.24. I know. I know. We must always live in peace.

@kimchirednecks

8 ай бұрын

Thanks for watching!! LOL. That ghost is my better half! We never even noticed that til you pointed it out! And we definitely live in peace 😂😂😂😂

I like your style 👍😎

@kimchirednecks

8 ай бұрын

Thank you for watching and for the comment. We love your handle!!

Putting water in the pipe and closing the ends and freezing it helps you bend it as well

@kimchirednecks

7 ай бұрын

Thank you. That is a great tip!

@TheChefmike66

6 ай бұрын

Wow, that's interesting. I would worry about it rupturing from ice expansion, but a fascinating concept.

Phil Billy Moonshine also has upgrade parts for the Vevor stills if you aren't so handy.

@kimchirednecks

6 ай бұрын

That is good to know. Thanks for the tip!

You can use big wine cooking 2000w stainless cooker for a distiller, just the lid must be tight.

@kimchirednecks

Жыл бұрын

There are several home brewers that can be used to distill. I like these because they are easy to clean and work with an induction eye, so I don't have to worry about scorching the mash on a heating element.

Hello, couldnt you make the condenser from flexible stainless pipe, just add a spacer to hold the coils? thanks , best regards

@kimchirednecks

Жыл бұрын

You could do that. Technically all you need is a heat conductive material to cool the steam back to a liquid. Copper is just kind of traditional and is supposed to help remove some things from the alcohol. Sulfer compounds I think.

😃😃😃, im not running Vevor, but i am running the same set up. My worm is already 3/8th tubing, u actually notak8ng a change?

@kimchirednecks

8 ай бұрын

Since our tube is now longer, it is less likely to get steam blown all the way through. (If you don't have enough coil when you are cooking, it is possible to blow steam all the way through it).Happy shining!

Please be captain spalding for Halloween.

@kimchirednecks

10 ай бұрын

Probably not going to happen. But thanks for the comment and for watching.

You hooked me with wire😎

@kimchirednecks

9 ай бұрын

Thanks for watching. i went back and looked at it and my redneck self was calling the tubing wire. lol

I drilled the four holes for zip ties to low and immediately realized they would leak. I redrilled them about an inch higher and filled the original holes with silicone.

@kimchirednecks

5 ай бұрын

Yeah, attention to detail. At least that is a relatively easy fix. We have all been there!

What type/size is the hose? I have a Vevor that didn’t come with the hose.

@kimchirednecks

4 ай бұрын

I think it is 3/8 ID tubing. You can get it probably from Amazon or an aquarium store.

@wpshaffer

4 ай бұрын

I should’ve been clearer. I’m talking about the flexible tubing/hose that connects the boiler to the condenser

@kimchirednecks

4 ай бұрын

@@wpshaffer It's a 3/8ths ID flex hose which 1/2 inch connector on the end. Ours came with our Vevor kit.

I mean no disrespect, but your voice reminds me of the Red Green show

@kimchirednecks

10 ай бұрын

Had to look that one up. The name was familiar but it has been awhile since we've seen that. Thanks for the comment!

Wire???

@kimchirednecks

10 ай бұрын

We did not use wires. But as rednecks, we will admit to using some zip ties. LOL

Are you the hypothetical Victor fairy

@larryhaynes7298

10 ай бұрын

Liquor**

@kimchirednecks

10 ай бұрын

Lol. Home distilling is legal here, so we don't have to be hypothetical 😊 South Korea is friendly for home distillation.

Türkçe yayınlayın anlayalm baybay

@kimchirednecks

3 ай бұрын

So sorry, we do not have anyone to translate into Turkish.