Great comparison. Good to see you experimenting away as always!

@runerebel8441

3 ай бұрын

Thank you my friend 😃

Wow thanks for the shout out maestro. I really appreciate it. That hdb is shooting hot! Will have one to try in the channel soon. 👍 Thanks for the support.

@runerebel8441

10 ай бұрын

Thanks my friend. Iam glad to help. Good luck with your channel brother 😃👍

Hello Friend ! Very good job 👏👏👏 HDB is my next because the many uppgades and 16 shots in automatics. THX so much 🙏👍

@runerebel8441

10 ай бұрын

Thank you my friend🙏. The HDB68 is one of my favorite markers. I can highly recomend it 😃👍

Great data😉😎 With this info, one could customize ammo with progressively heavier to lighter therefore retaining velocity as gas is used up. 😎👍 😎✌👍❤🖖 Love Brother

@runerebel8441

10 ай бұрын

Thanks brother. Yes tinkering with ammo weight is a good idea. It seems for me that the optimum weight for these hard hitting markers is around 7 gram. Cheers bro 😃

I'm always amazed by the power the Umarex range of launchers can produce without fancy replacement parts or expensive materials. Especially compared to the Byrna range.

@runerebel8441

10 ай бұрын

Yes. The Umarex makes some nice stuff. Great power also 💥👍

I really like the 16j version!!

@runerebel8441

10 ай бұрын

I agree. Its very cool ideed 😃👍

Nice comparison Rune 👍🏻

@runerebel8441

10 ай бұрын

Thanks my friend 😃

Lots of info, saves me from doing my own testing.Thank you! 👍🏻🇺🇸

@runerebel8441

10 ай бұрын

Thanks my friend. Iam glad you like the video 😃

Oh hell yea your gonna like that one

@runerebel8441

10 ай бұрын

Yes its a very cool and hard hitting marker 😃

Good testing brother💥💥💥

@runerebel8441

10 ай бұрын

Thank you brother 😃

Cool.

@runerebel8441

2 күн бұрын

Thanks

Hello to all - great job Rune! I appreciate your approach to share your passion with a community in a very simple and friendly way! Keep up please, KZread need more ppl like you :) now I have 2 questions for you : Question 1 => how to differentiate gen 1 hdb from gen 2 ? Question 2 => do you know by any chance a place where I could buy an extra restrictor? Drilled mine and would like to have a spare one to be able to retrofit my hdb back to original. Thanks again and take care 🙏🏻😊

@runerebel8441

10 ай бұрын

Thanks my friend. From what Iam told the gen 1 has a screwed on CO2 tube and gen 2 has a crimped on CO2 tube. The detent is also somewhat diffrent (thicker). I have not seen the gen1 so I cant say for sure if this is correct. You can buy restrictors fromplaces like www.homedefence-24.com and www.tech23.de Take care and happy shooting 😃

@nicetohave2926

10 ай бұрын

@@runerebel8441 thank you Rune!

Cheers!!!

@runerebel8441

10 ай бұрын

Cheers 😃

I've taken my HDX apart and done the usual mods. Interesting how much more power the HDB generates vs the HDX.

@runerebel8441

10 ай бұрын

Hi. Yes the HDB has way more power. The HDX has a long brass tube acting like a restrictor, so the power is more limmited

Another question for you Rune… some months ago you did a test with drilled restrictor and no valve block. So at the end of the day which configuration do you think is more efficient : no valve block + drilled restrictor OR no valve block + original restrictor ? Thanks :)

@runerebel8441

10 ай бұрын

Hi my friend. The drilled restrictor will give a better flow and for the other markers this might be what I would use. However since this marker takes 16 shots/balls then I like having enough CO2 to be able to fire of all the shots from the magazine. So unless the restrictor gets clogged some way (it can happend) then I use the orginal restrictor. Cheers 😃

Oh right. I have it and took out valve block. But not the restrictor. Interesting I thought it may “fart” out all the CO2 first shot if I took that out too.

@runerebel8441

10 ай бұрын

Yes it might give farting sounds. But it still gives plenty of power. Most of the Umarex T4E range work just fine without the restrictor. The only marker that must have it if the HDR50. No sure why it is so...🤔

Good work as always Rune,can one also take out the HDR.68 16 joule version to get more power ? Thanks 👍

@runerebel8441

10 ай бұрын

Thank you my friend. Yes the HDR68 will get more power if you remove the restrictor 😃

@thystruter6869

10 ай бұрын

​@@runerebel8441strange but it won't work for the.50 HDR 11 joules?

@runerebel8441

10 ай бұрын

I know. The HDR50 must have the restrictor, or it dumps all the CO2 in one or two shots. But the HDR68 it can be removed.@@thystruter6869

great test rune, do you have the gen 2 version? the gen 1s hit around 50 joules they did something and changed the detents but there is a way to bring it back up to par by adding some material above the detent, micheal giorgio knows the mods maby ask him but great test as always :)

@runerebel8441

10 ай бұрын

Thank you Jeff 🙏. Yes I have the Gen-2 version. If I use heavy balls then the energy rise. With no valveblock and no restrictor using 12 gram CO2 I usualy get 40+ joule. If I use the 88 gram I get over 70 joule. So plenty of power. I might try and tinker with the detent later. Thanks for the info my friend. 👍

@sosteve9113

10 ай бұрын

Is it restricted in your country

@runerebel8441

10 ай бұрын

There is no powerlimmits on markers here in Norway. But for some reason they only import the 7,5 joule and the 16 joule version@@sosteve9113

Less Lethal Spot ✅

@runerebel8441

10 ай бұрын

Yes. New cool channel 😃

Thanks for great video and greetings from Hungary :) After this testing, I want to remove the valve block and use my HDB without valve blick but with restrictor in - could you please let me know if valve block can be installed back anytime later or is it damaged when removing?

@maxpowerupgrades

10 ай бұрын

En mi HDB68 tenía tres pequeñas muescas que lo sujetaban, y para poder sacar el bloque de válvulas golpeé las muescas con cuidado hasta que quedó libre. Después lo saqué atornillando y tirando. No creo que vuelva a quedar bien sujeto si lo vuelvo a instalar.

@runerebel8441

10 ай бұрын

Thank you my friend. Iam glad you like the video. You can put the valveblock back anytime.

I just removed valve block, no restrictor, and installed the modify pin. After a few shots it started firing the whole magazine on the first trigger pull. Any idea what broke? Thank you!!

@runerebel8441

5 ай бұрын

So it worked fine first? So it dumps all the CO2 now with fresh CO2 canisters? Before opening the marker up you can try and install the restrictor again. It might happend because of overpressure. If it still dumps all CO2 then I guess its the spring for the sear that has jammed or broken. Good luck

Hi Rune....Good to see you back on the scene...Cheers QUESTION: How many joules was your HDB68 rated at when new? Thanks

@runerebel8441

9 ай бұрын

Thanks my friend. Mine is the 16 joule version. Cheers

Love the videos. I have a question,, the hdp 68 7.5j has no restriction disk in with the co2 canister area,,, if the restriction block in the chamber is removed,, what would the average power be with basic rubber balls? Or would I still have to remove a valve somewhere to get more power ?

@runerebel8441

4 ай бұрын

Thanks my friend. You meen the HDP50, right? If you remove the valve block from the valve internals you will get full power. The 7,5 joule dont have the CO2 restrictor in the CO2 tube. You will get ca 4 very good powerful shots (20+ Joule), plus 3-4 weaker shots before its out of CO2. The power will depend on the ammo used. I guess rubber balls will give ca 18+ joule. No need to change the valve. Just remove the valve block. Good luck 😃

@alimac4531

4 ай бұрын

@@runerebel8441 thanks. I can’t do any mods where I am, I was just interested to know- 1- what the 7.5j hdr 68 can produce without tuning barrel, restriction disks and valve blocks, or anything added,,,,so just a stock hdr 68, with restrictive valves/chambers removed would measure,, (looks around 25 to 30j) and then- 2- what the tuning barrel would add (with and then without the extension barrell, I hate the elongation look)

@runerebel8441

4 ай бұрын

Hi. The HDR68 with an open valve (no restrictors of any kind) will give ca 30 joule depending on ammo and temperature. This goes for both the 7,5 joule and 16 joule versions. The longer barrel dont give much if its not warm and you use heavy ammo. So at 20C its hardly helps. However at 25C or more the warmer temp will rise the CO2 pressure. Best I have seen was 38 joule using a 12 gram CO2. If you also use HPA or a large 88 gram CO2 you will get 50+++ joule.... Hope this info helps 😃@@alimac4531

Complimenti per il video,si potrebbe mettere la prolunga dell' hdr68 per allungare un po' la canna e lo spillo più largo per il buco della bomboletta CO2 e se possibile la.camera.di.espansione z-ram così sempre.a.co2 e.con misure moderate, chissà di quanto.aumenta

@runerebel8441

10 ай бұрын

Thanks my friend. You can do all that. Iam waiting for more adapters to use one this model. I think the power will rise quite a bit but no idea how much 🤔

Can somebody please recommend brand for air gun silicone spray?

@runerebel8441

4 ай бұрын

I just use a brand sold in the auto shops here. Think you can use most types, just make sure its safe to use on O-rings and seals.

More power for a few rounds then drops off

@runerebel8441

10 ай бұрын

Yes. I will only remove it if I want max power and use heavy balls. For normal use with rubberballs I will use it with the restrictor

Excuse me, which part is the "valve block" you are talking about? I am from Taiwan, because one of my long silver blocking air valves (the one inside the push mouth) was broken during maintenance, which caused the small steel cylinder to be installed, and the co2 gas would be sprayed out immediately, because this gun in Taiwan The parts are not produced (I don’t know if they will come out). I searched for a long time, but I couldn’t find the corresponding maintenance agent or manufacturing company in Taiwan. I have subscribed to your video, but I don’t understand English. Yours is very detailed but not The subtitle can display the translation, I can only use the translator to type and convert it into English, I hope this big brother can teach me or help me, how to solve the problem of leaking air from the muzzle of the gun, I am very troubled, all in Taiwan 16 Joule version (H D B .68-16j)! If you see that you are willing to answer my gun damage problem for me, brother, I am grateful, thank you very much!😢

@user-lk7wd6cb3l

10 ай бұрын

Sorry, by the way, I would like to ask you which part the "limiting air" is. There is no introduction video or manual in Taiwan, sorry!

@runerebel8441

10 ай бұрын

Hello my friend. The HDB68 has two types of CO2 restrictors. One sits inside the valve and is generaly called a "valve-block". It looks like a metalll cylinder. Remove it for better flow. The other is a disck shaped restrictor that you can remove with a screwdriver. It sita inside the CO2 tube for the 12 gram canister. It can be removed for max power. The leak out the barrel sounds like the broken heat-core O-ring. You will have to open the meckanism and install a new O-ring. It has the size: 9x6x1,5mm. Good luck brother 🙂@@user-lk7wd6cb3l

@user-lk7wd6cb3l

10 ай бұрын

@@runerebel8441 Thank you for your answer. It may be the O-ring that caused the air leakage at the beginning. Because of what you said, the metal cylinder and the disc have both in my version. At the beginning, I removed the metal cylinder, which caused the jet to leak light. I thought it was The cylinder is the air leakage caused by blocking the inside of the air outlet, but unfortunately, the metal of my valve was broken abruptly, making the entire valve unusable, so I had to send it back to the agent in Taiwan. After all, this valve is not produced by us and Manufactured, so currently it can only be sent to the agent’s factory for repair, but it depends on whether the company provides parts to Taiwan for repair, if not...my machine is scrapped, but HDR50 has parts, I don’t know if they can be shared , can only wait for the reply from the Taiwan agent! Thanks again for your help! ! ! 😃

@runerebel8441

10 ай бұрын

Good luck my friend. Hope you get it fixed 😃👍@@user-lk7wd6cb3l